check Returns up to 14 days
check Pay in 30 days
check Wholesale area - B2B
Product ID: 545681

CAMSHAFT KIT 551G GEAR DRIVE - 106-4868

£983.83 including VAT

15 day return period

551 Cam Kit

Manufacturer: S&S Cycle
Manufacturer id: 106-4868
General description
  • Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
  • Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
  • Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
  • Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
  • A hydraulic press and other professional-level tools are required to install these kits
  • Cam bearings and gaskets must be replaced when installing new cams
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • Due to the inherent characteristics of gear drives, you may experience more valve train noise.
  • Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
  • Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9
  • More power across the rpm range, with improved low and midrange torque
  • Can be used with stock pushrods, springs and lifters
  • Strongest from 1,000-4,000 rpm
  • Made in the U.S.A.
Manufacturer:

, , , , ,

Fits to