Denali DialDim Lighting Controller - DNL.WHS.20500

Name: Denali DialDim Lighting Controller - DNL.WHS.20500
Brand: Denali
SKU: 1792144
Price: 293.45323 GBP
Availability: InStock

£293.45 including VAT

Denali DialDim Lighting Controller

Manufacturer:

Denali

Manufacturer id:

DNL.WHS.20500

General description

DialDim™ Lighting Controller
Allows to sell a complete solution with easy control of all light functions
Independently turn on/off and dim two sets of auxiliary lights from a single switch
LED halo switch displays your exact settings
Unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
On/Off & DimIndependently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits. High/Low SyncYour auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle high beam circuit to enable this feature. Stealth ModeA clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected. Cancel with Turn SignalWhen enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature. Flash as Turn SignalWhen enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature. Strobe with HornWhen enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature. Electronically Fused CircuitsBoth light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped. Voltage Display IndicatorUpon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v. Low Voltage CutoffIf battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.