RMS - Motorcycle engine - parts

2024-06-18, 09:23

View original

Miko

I do not recommend this plug absolutely. The plug did not withstand the first tightening with a torque wrench much before reaching the proper tightening torque. I can't tell where the positive comments under this product come from, maybe with larger diameter plugs it is better. In my case, a simple oil change ended up with a whole day of disassembling and putting the motorcycle back together to remove the broken thread and the magnesium that fell inside the oil pan. The fit itself is not right either, the original plug has more than twice the thread length.

Reliable opinion

2024-06-17, 07:21

View original

Patryk

Discs very well made clutch goes very well springs also very well I would like to remind other customers that you need to put the spacers on the rounded side to the engine and preferably the discs, spacers and springs should lie at least 24 hours in oil The product is very good company also I recommend this is probably my fifth order at gmoto and they have never let me down

Reliable opinion

2024-09-08, 05:14

View original

Mateusz

I recently purchased a product for my beloved motorcycle called KTM sx 125 and was looking for trusted sites on the Internet but could not find any until I suddenly came across gmoto.pl. On the site there is a huge selection, it is very easy to find parts for your motorcycle because there is an option "choose a vehicle" very fast delivery and prices are not exorbitant and the site is highly recommended. Greetings?

Reliable opinion

2024-06-28, 12:21

View original

Monika

Part I recommend this piston is very nice after 50km is like new no scratches the engine on it starts with a kick and has high compression fits honda or syma has a nice machined tips recommend! The quality is very good once again recommend ? I thought my sim would already go to scrap because parts not available but I searched and found this ad it is very good it runs nicely.

Reliable opinion

2024-07-27, 20:14

View original

Bartłomiej

Gasket is very solid almost like the original others write that it is too long but it is not a matter of that because it must first be glued to the cover and apply a small amount of silicone and then install and everything will fit perfectly and I highly recommend because in my place is like the original nothing flies, nothing sweats.

Reliable opinion