Motorcycle engine - parts
HM-Moto CRE 50

2020-06-04, 00:46

View original

Adam

Yamaha TZR 50 2007. AM6 engine. Discs on the pattern of the original. Fit and installation perfect. Already in service. Along with good oil after 50km I rate it bdb. Recommended.

Reliable opinion

2018-07-28, 23:55

View original

Michał

Generic Trigger. Cylinder easy to put on, well, tightly packed during transport. It met my requirements.

Reliable opinion

2024-10-31, 14:26

View original

Kacper

The balance shaft wedge in the AM6 engine plays a key role in ensuring the stability and smoothness of the drive unit. Its main task is to minimize vibration, which translates into driving comfort and the durability of other engine components. It is worth noting that, as a precision component, it requires proper care and regular maintenance. Users often notice that a worn or damaged wedge can lead to increased noise and reduced performance, which in the long run affects driving safety. gmoto service offers expert sales service for this component, which certainly translates into customer satisfaction. Proper maintenance of the wedge is an investment in the longevity of the AM6 engine.

Reliable opinion

2024-08-03, 06:21

View original

Jakub

The basket seems to be slightly lighter than the original, whether this is bad or good is not for me to judge, since the replacement I have not had any problems with it. The serrated hole in the middle fits snugly, I had to convince the basket with a rubber hammer to go into place, on the other hand there is no play (xD). Since this procedure it goes in and out smoothly, so it's not that it's impossible to remove it later (although it's possible that it's the fault of some mess in my clutch). The piece is carefully made, with no cavities or damage. I recommend

Reliable opinion

2016-05-20, 08:39

View original

Marek

Hello.I purchased the water pump sealer for the AM6 engine on the website.I had to purchase it because it broke down for me.When I saw that I had cream in the box I already knew that the sealer went. The sealer itself is very good.I can recommend it to other motorcyclists.Regards

Reliable opinion

2018-11-04, 13:41

View original

Mariusz

Generic TR 50 sm 2015. The discs arrived on the second business day from the date of order. That is, very fast. Generic I had a problem finding discs for my model,and I found them only at you. Thank you for shopping and I highly recommend your store.

Reliable opinion

2020-04-26, 09:31

View original

Eryk

Hello I own a supermoto it is a generic trigger sm 50.The wedge I ordered is solidly made,I did not expect such quality. During installation everything went very quickly , no problems with fitting. I recommend this shaft wedge.

Reliable opinion

2021-03-04, 08:55

View original

Kacper

I ride a 2005 Yamaha TZR motorcycle. After the winter it turned out that the clutch is to be done. Fortunately, only the discs. The quality of the product is better than I thought, they fit perfectly into the clutch basket and also with their appearance alone they satisfy.

Reliable opinion

2016-03-26, 22:42

View original

Daniel

Motorhispania Furia 50cc 2001. The product has great features that made it easy to install and does a great job of sealing the water pump. I find that it was a very good purchase and can confidently recommend it to others ;)

Reliable opinion

2020-08-14, 11:15

View original

Michał

The discs fit perfectly on my 2003 Husqvarna ch racing wxe with am6 engine. There were no unpleasant surprises clutch works until nice. Very affordable price going hand in hand with good quality workmanship. I recommend.

Reliable opinion

2019-02-16, 11:54

View original

Cezary

I received the clutch discs as well as the clutch cover gasket doggedly as offered which tells my needs. They fit properly and do their job. The price for these products is right.

Reliable opinion

2019-10-08, 06:02

View original

Kacper

I own a 2003 yamahe dt 50r. The water pump sealer for the am6 performs perfectly And is a great choice does not let water through it is very well made, I have not noticed any defects.

Reliable opinion

2020-06-06, 14:24

View original

Marcel

Mini cross (pocket bike) 60cc crankshaft wedge fits as well as possible. The installation went quickly and smoothly without any problems. Quality of workmanship and aesthetics as highly recommendable.

Reliable opinion

2021-04-30, 08:17

View original

Seweryn

I have a Rieju RS 2 and had a problem with oil mixing with coolant I ordered this simmer and everything is ok. 30min of work sealer changed and tight engine.

Reliable opinion

2021-04-30, 13:30

View original

Seweryn

I have a Rieju RS2 and I had a problem with oil mixing with coolant I ordered this simulator and everything is ok 30min of work sealant changed and tight engine.

Reliable opinion

2024-05-03, 20:56

View original

Wiktor

Very strong puller that fits most magnets in 50cc and to this double-sided only the one in the picture was black and I received a silver one, but it is only to perform its function.

Reliable opinion

2024-09-25, 16:59

View original

Dominik

Everything holds well, oring durable and as described, good quality, perfectly fits am6 engines(in my case installed in yamaha dt 50)

Reliable opinion

2021-08-11, 18:50

View original

Jakub

Aprilia RS 50. sealer at first glance seems pretty decent, did not wear any damage. I put it in and so far it's laughing.

Reliable opinion

2017-04-24, 20:35

View original

wiktor

Rieju rr 74cm year of production 2006 I purchased the piston is very well made I literally the same as the picture I am happy with the purchase

Reliable opinion

2020-12-01, 08:12

View original

Mateusz

Very good quality product, I purchased it for Yamaha DT 50 and it works great. Fits all AM6 engines, very good product.

Reliable opinion

2021-01-18, 19:50

View original

Wojciech

Fairly good discs I give a plus for packaging and aesthetics (nice packaging) not sure how long they will last. First impression positive.

Reliable opinion

2024-05-02, 19:59

View original

Jakub

The bearing is nice, for its price it is of very good quality, for Yamaha DT 50 it fits perfectly, you can take without a second thought.

Reliable opinion

2021-11-02, 18:32

View original

Rogério

The Part is like as advertised. The material used in the part it is of good quality. Transport to Portugal very fast. Recommend

Reliable opinion

2021-11-02, 18:32

View original

Rogério

The Part is like as advertised. The material used in the part it is of good quality. Transport to Portugal very fast. Recommend

Reliable opinion

2022-04-19, 07:53

View original

Adrian

Parts durable fit service nice piston bolts as for me reperda I always find what I need at a good price.

Reliable opinion

2024-10-11, 07:42

View original

Łukasz

The o-ring fits without a problem. Drives so far nothing happens. I recommend this oring is worth buying something that is good.

Reliable opinion

2023-05-18, 09:11

View original

Karil

I bought this bearing and I must say that it works perfectly. Very good workmanship and conformity to the description.

Reliable opinion

2021-08-16, 09:50

View original

Błażej

Made to look very good. Once installed, they work properly. The clutch works and performs its function.

Reliable opinion

2020-05-12, 09:30

View original

Mikołaj

The discs fit perfectly. They do their job very well, they are pleasant to drive and I can knowingly recommend.

Reliable opinion

2020-01-06, 12:58

View original

Brańka

Zipp quantum Security not this size sorry description is that it fits the dot and yet not the same

Reliable opinion

2024-11-09, 04:55

View original

przemysław

Good quality pump sealer fit perfectly on 2010 Yamaha tzr50 with am6 engine code. Recommended.

Reliable opinion

2021-08-11, 18:59

View original

Jakub

Aprilia RS. Engine finally neat as well as clean, zero any oil stains this is what I needed :)

Reliable opinion

2018-10-23, 18:52

View original

Filip

Yamaha tzr 90cc on a cylinder raspberry I recommend the thltl durable still on lapping very good compression

Reliable opinion

2017-09-24, 22:53

View original

Marcel

Hi. Gasket installed and does its job! it is as good as the original. .

Reliable opinion

2024-06-16, 08:03

View original

Adam

Fits original minarelli piston, made very well, no compatibility problems

Reliable opinion

2015-04-19, 11:36

View original

Marek

Item as described.Materially very good.I recommend and greetings.

Reliable opinion

2016-03-10, 11:01

View original

Kacper

Keeway xray 50 sm 2007 Super parts at the highest level

Reliable opinion

2016-09-19, 20:51

View original

SŁAWOMIR

Yamaha TZR 90 04r Recommended by Gmoto. Quality,speed and freebies!

Reliable opinion

2016-08-01, 09:35

View original

Jacek

Yamaha tzr 50, 2003, wedge fits ideolo, recommend :)

Reliable opinion

2016-09-22, 09:05

View original

Piotr

Aprilia RS 50 1998 good quality workmanship recommend

Reliable opinion