Forgot password
Order status
![Valve Shim HLP 9.48mm [2.20mm]](https://gmotoshop.co.uk/assets/images/no-photo.png)
Free delivery from euro
Front suspension repair kits
Manufacturer
Price
Sort
from 6
Browse Front suspension repair kits by manufacturer
Products reviews
WSK 125 1983r Bushing material and dimensions appropriate. It is nice that the outside diameter is in "plus". You can perfectly machine the bushing to the size of the "worn out" inside the lags.When you do it for a tight fit, beware of the heating of the bushing (the dimension increases). After machining it is worth "soaking" in oil and once again try on.Very good workmanship - a big plus.
Review translated automatically
Reliable opinion
WSK 125 1983r Bushing material and dimensions as suitable as possible, although the inner diameter could be in the "minus" these 0.2-0.3 mm due to the wear of the lag. Installation without problems. - Another "front end" works as it should.
Review translated automatically
Reliable opinion
WSK 175 s2 sport screw good quality thread made very correctly which translates into easy screwing into the worm socket very nice zinc shines like chrome recommendable goods.
Review translated automatically
Reliable opinion
I own an 80 yr old wsk 125 . The parts that I ordered from you meet all the characteristics that they should.
Review translated automatically
Reliable opinion
I own a WSK 125 motorcycle and I am just in the process of restoring it, in connection with the reconditioning of the front shock absorbers I made a purchase of two upper bushings. After receiving the order, at first glance you can see that one of the bushings is larger than the other. After mothballing, it turned out that one was 31x35.5x41, which is what I ordered, while the other had dimensions of 31x35.5x51. I made an attempt to make a call, however, on the hotline I received a message that I was perth in line for a call and it was like that for several minutes. I don't know how long you have to wait for a connection but it is far too long I didn't wait and there is no other form of konak.
Review translated automatically
Reliable opinion
Hello, WSK 125 M06B3, year 1974.I had difficulty putting it on, the rubber goes in very hard on the lag, not sure if it is supposed to look like that. After putting it on, it is very hard to adjust the height step. For those who have a similar problem, I suggest lubricating the leveller with oil and it will go in smoothly. Material and aesthetics ok, I think the inner diameter could be a little larger and everything will be fine.
Review translated automatically
Reliable opinion
Mz Etz 250 motorcycle from 1987. Unfortunately, often leaking front shock absorbers is already a tradition of this motorcycle.Purchased at Gmoto repair set looks solid and when assembled, all components matched, the installation went smoothly. The most important thing is the quality of the Simera sealing rings, but this will turn out after riding a few hundred km.
Review translated automatically
Reliable opinion
Firstly, errors in the description of the length of the sleeve is 50 mm - you need to cut down to 40,50 , because it will not fit the simering and the nut.Secondly, the outside diameter is 36.5 mm - need to grind to 35.9 - a long and arduous job.The quality of the sleeve seems very good, but grinding it to the necessary dimensions, is a nightmare.
Review translated automatically
Reliable opinion
The product of very good quality. I personally left and installed, rubber covers - the original long ones. It would be useful if just such a set was available for purchase, because it simply makes the MZ look nicer. Overall, I am satisfied with the purchase. Everything on the plus side. I recommend.
Review translated automatically
Reliable opinion
The product of very good quality. I personally left and installed, rubber covers - the original long ones. It would be useful if just such a set was available for purchase, because it simply makes the MZ look nicer. Overall, I am satisfied with the purchase. Everything on the plus side. I recommend.
Review translated automatically
Reliable opinion
The inner diameter of the bottom bushing is too large by about 0.5 to 1.0 mm it does not hold tightly like the original you can slightly remove it with your hand and this should not be the case,this can cause problems during operation. The other parts I bought super.
Review translated automatically
Reliable opinion
The material is ok. the outer dimension could be more accurate to speed up the fit, because the inner dimension needs to be slightly corrected - but this is an advantage of these bushings. The price glaringly, because a kpl for both lags is about 100pln.
Review translated automatically
Reliable opinion
WSK 125 b3 1979.Front suspension repair kit as described,product looks high quality. Assembly without any problems. I highly recommend GMOTO I do shopping there for several years already always high quality service.
Review translated automatically
Reliable opinion
The bushings fit tightly on the stationary lobe, but in the moving part there was no chance to put them in, they required rolling of the outer diameter.Compared to the orginale zwewnętrzna diameter was 0 1mm larger.
Review translated automatically
Reliable opinion
The set was not a set. The simmerers were out of the package and appear looser than the old ones, although the dimensions scored on the sealers are the same as the old ones.
Review translated automatically
Reliable opinion
Very good product I was able to repair the quad of my son who is super happy this easy mount to give a second life to his quad thank you
Review translated automatically
Reliable opinion
Junak M-10 Replacement zimmering in the front suspension. Maybe a little too soft, we'll see in a while if it doesn't leak.
Review translated automatically
Reliable opinion