mounted to honda xr125l, only need to grind the crankcases / turn the cylinder on the lathe to fit the crankcases, because the cylinder skirt has a larger diameter than the crankcases will fit. The cylinder fits nicely, it runs, you can already see the power furniture in the lower revs.
The piston knocks, the piston knocks, it's not the valves or anything, it's the piston. Because the clearance between the piston and the cylinder is too big. It's generally supposed to be around 5 hundredths of a millimeter, but I measured 33 hundredths from the bottom of the piston and 63 hundredths from the top of the piston.
The piston is hard to find, I found one here on the eshop, so I just pray it comes and has the right dimensions, that mine in the kit was just a dud...
I went crazy looking for a regulator for a Motor hispania Bogga 125cc because that reguador carries ignition lights.the case is that this cable is marked as red / white and I ordered this regulator only because in the pictures it had it.it is the only one I found so.when it arrived the color was pink but was tested without cutting the connectors (which were not equal) and worked,so the connectors were cut and finally a regulator that works for that bike.the fast shipping.very satisfied.
I actually bought the battery because of the low price.
But now that I've had to use it, I can say that 4Ah... 5Ah can also be accommodated due to the design.
And then there's the charger, which is easy to use...
I own the Bosch charger.
But digging it out... so easy to connect & off you go.
Plus the button on the battery & I can see the charge status immediately.
Thank you!
A very good and high quality gasket set. The title says that this will fit 80cc cylinders but in fact this will only fit 72cc cylinders. However, I knew this beforehand but for someone ordering for the first time it might be hard to notice. Functionality tested the seals did not leak and fit the moped as the gmoto site said.
This is a 6V 10Ah battery for a 53 year old motorcycle Condor 350 from a former Swiss Army stock (engine: 350cc Ducati).
The product fits perfectly in the intended position and also works perfectly.
From order to receipt of the product, everything was absolutely satisfactory.
Ordering was easy and payment was easy with mobilepay.
Delivery was very fast.
The tracking code always kept me informed about the different stages of the product--very secure and I knew when the goods were at the door.
The product was as it should be. I am very satisfied.
In my search for a good battery for my vintage motorcycle, I fortunately came across Gmoto. Here I found the B38-6A Moretti gel battery. It fits perfectly, was delivered fast as the wind and at an unbeatable price!
Many thanks and best regards from Bavaria, Enrico
I was pleasantly surprised by the Moretti 22mm carburettor for AM6 50ccm 2T with manual choke. Quality workmanship, included nozzle kit and easy adjustment. Engine revs nicely, throttle response excellent. For the price a super choice, I am totally satisfied!
Although the battery is out of order, I am very satisfied with the very commercial reaction of this supplier, the battery I received was defective, unusable.
Without any worries, following my complaint, Gmoto proceeded to reimburse me.