Motorcycle electrical & lighting
CZ 175
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2019-12-20, 08:50
Marek
Zipp quantum gt5 2013 I ordered two xeon bulbs. And when they reached me. One of them had a crooked shade (It's the blue glass). I put it on without touching the glass with my hands, of course. It was fun, but it ended quickly after 7 minutes of driving I had to go home on stoplights because there was a short circuit in the installation. I checked what was wrong and it turned out that one had reached the end of its life (visible in the photo). There was a horrible sweet smell coming out of the lampshade as well as from that bulb even though it didn't look burnt, that's what it was. And the 2 also did not want to be alone and 15 min of driving also made a short circuit and would not light up. Interestingly, the same smell accompanied 2, so from this I deduced that it was burnt and even swapping its place in the lampshade did not help.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-07, 20:11
Bartłomiej
Unfortunately, someone made a mistake in the installation of electrical wires and pins. Have to correct the factory, bulb, "no name" without any markings. Overall from the appearance nice. Lampshade and chrome frame minimally smaller in diameter than the originals, to put on the original lampshades you need to sand the edges of the lampshade minimally.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-01-15, 19:25
Andrzej
Zipp Neken 50 4T 2017.Just a bulb,and very happy.There is a huge difference in comparison with the factory-installed Ba20D.Mounting trivially easy and more convenient,because there is a much shorter base of the bulb.Perfectly copes.Greetings and thanks.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-18, 16:39
Dominik
The bulb has the specifications as shown in the description,fits under the BA9S socket,It looks like a good quality product,but it remains to be seen,I attach a photo that may help someone in choosing the right bulb.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-05, 18:39
Mateusz
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-01, 19:22
Paweł
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-09-22, 19:17
MARCIN
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-06, 13:41
Adamsky73
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-02, 20:15
WALDEMAR
Cz175 487 year prod.1988, the mount fits, I had to rework the contacts because the predecessor did something, it burns from a kick but does not go into rotation, probably a matter of adjustment.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-09, 11:31
Sebastian
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-06, 09:30
Robert
I would like to give a good opinion about the bulbs but I can not because they did not meet my requirements because after two days they turned white inside and do not work .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-23, 18:59
Jakub
The bulb, like a bulb, shines, even very well. When driving at night it illuminates the whole road well, the color is rather yellow, in my classic it looks great.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-17, 13:12
DOMINIK
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS OK .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-27, 22:16
Mikołaj
WSK M06 B3 "Hunchback" 1975, bulb like original from those years! :-) They shine well and replacement hassle-free.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 10:55
Sebastian
I bought the battery for an electric Jeep for my son. It charges quickly and lasts a long time. Definitely recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-17, 13:07
DOMINIK
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-10-10, 13:46
Krystian
The color and brightness of the light satisfactory, however, burned out after three days, shining a total of about 3h.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-20, 05:59
Beata
I purchased a 12V turn signal interrupter. The product is solidly made, with durable materials that ensure long life. The interrupter works flawlessly, providing smooth and regular flashing of the turn signals, which improves visibility and safety on the road. Installation is simple and intuitive, compatible with most 12V systems on motorcycles and cars. Aesthetically it looks good, its small size allows it to be discreetly placed in the vehicle. The product is reliable and weatherproof, making it a great choice for anyone looking for a durable and effective solution for their turn signal system.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-14, 22:09
Przemek
WRONG!!! If someone has nothing to do with money this is a great choice. After firing it came 2s and burned. And long and short. It is better to buy any for 5 zeta sle zeby it works. I heartily do not recommend. In these piebiadzach I recommend something that works and not something thanks to which you will have to return from a night ride without lights. Expensive, does not work, no sense, I do not recommend and sympathize with the buyers.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-01-01, 15:35
Krzysztof
I own a Romet C1 moped. I was positively surprised by the power of the light and its pleasant color. Unfortunately, it blinds other drivers and I changed to my old 25W "bubble". My "motorcycle" does not have high and low beam in separate shades,so I can not give it as a road light, however, if you own a cross etc., I recommend it. Mine is already waiting for this fate, only the cross is still missing
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-08, 20:53
Gwalbert
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-28, 09:49
Robert
The products purchased are the audible signal, clutch cover gasket, oil pan gasket and oil filter. All the above mentioned parts are for Yamaha XJ600 Diversion motorcycle. Gaskets made bdb The sound signal in zinc does not rust and finally the sound is as it should be and as ram. Oil filter as it is a filter once again from hiflo company bdb.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-21, 16:50
DARIUSZ
Interrupter decent, when you turn on the turn signal works without unnecessary delay. Workmanship as precise as possible. It works flawlessly. Terminals made very well, the connectors stick like glued, They are wide enough that you have to use force to slide the connectors onto them, which is a great advantage. This is a really solid and refined design.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:19
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-17, 08:57
Kamil
I've been putting together a 1983 Etz 250 for a few days for a neighbor who is the first owner of this beautiful motorcycle. Unfortunately, the blinkers were not working, it turned out that the fault was the turn signal interrupter. Immediately with help came ,,gmoto,, fast delivery super workmanship, easy installation and beautiful aesthetics. Until it is nice to repair the motorcycle!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 19:33
ADAM
The signal fits the WSK 125 motorcycle perfectly - it replaces the weak factory horn. I will place it in the housing of the original one and without changing the appearance of the motorcycle I will be sure that I can be heard ;) I recommend the product - it is well made and serves its purpose in 101%. For these few zlotys I could not find anything better.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-31, 09:41
Miklós
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-28, 00:16
Rafał
Scooter 2017 Toros El Rio Fit 99,coma 8% The most important thing is that everything works.I AM satisfied with this store more than on allegro because here everything is described in detail before buying to which I fit all models listed is solid and clear .This store I like the MOST .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-05-06, 10:11
Kordian
Purchase very solid and durable. Fits the ignition coil perfectly as well as the spark plug. I have not seen any ignition pipe that holds so tightly. The product is very well made, close to the original. The rubber on the pipe is also a very good idea, as it insulates the plugs from water, etc.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-14, 08:41
Daniel
I ordered parts for ogar 200 year 89 Plates very good quality, installation went without any complications. I recommend Gmoto the best parts at great prices only at them. Express shipping, of course InPost oaczkomaty, the most convenient form of shipment, I received the package after 11 p.m. I recommend!!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-18, 13:16
Piotr
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-16, 10:28
Michał
The bulb burned out after a kilometer driven. After lighting it up, a white residue appeared inside, which did not herald anything good. After a kilometer driven, the bulb to be thrown away. I went back to the factory one. It works all the time, and it has not been replaced since the beginning., Zumico GR 200
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-19, 10:51
Piotr
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-19, 10:51
Piotr
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-08-09, 19:38
Dąbrowski
I have a Romet 200 with an engine from a 88 year old warbler. The purchase was really successful. It was put on without any problems 0 modifications, everything fitted like a dream. I RECOMMEND SHOPPING AT GMOTO SHOP IS SUCH A SUCCESS.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-26, 11:24
Andrzej
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-13, 19:06
Zita
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-10-30, 13:36
MAREK
Mosquito Mosquito s38 1975-purchased parts are of high quality in terms of workmanship, aesthetics, efficiency of operation -I recommend many motorcycles I assemble and with this company super to cooperate-mega efficient shipping 24 hours to the other end of the Polish b.good contact with the seller.RECOMMENDED
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-13, 09:55
Krzysztof
The beeper I ordered is a little smaller than was original on the Router WS 50 motorcycle, but this does not interfere with anything. Well made, easy to install and the sound is almost identical to the previous one. As for me on the plus side. I did not find any defects.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-17, 17:40
Krzysztof
Ogar 200 88' The kit was purchased as a spare , no less I was hoping to receive a black cable and black pipe - arrived red cable and black pipe. This does not affect the operation of what, but I would prefer to receive everything in one color
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion





































