Forgot password
Order status
Free delivery from euro
Motorcycle engine seal sets
Options +4 
Browse Motorcycle engine seal sets by manufacturer
Products reviews
In this set you will find all the gaskets that can be placed in the engine(In my case it was a Jawa 223 engine mounted in a Romet Ogar 200 moped) , carburetor, as well as a gasket under the head and under the muffler elbow . Their great advantage is their low price, so that we can immediately buy a spare pair (in case due to a mistake we have to assemble the engine again)They are made of good cardboard and fit almost perfectly. I wrote almost, because in places such as where we put on the gearshift apparatus, or where the piston comes out, they need to be trimmed by our own hands. Such a state of affairs is, of course, understandable and poses absolutely no problem, since, after all, each of us has scissors at hand. Below I attach a photo that shows each of the gaskets purchased. I would show how they look in the already assembled engine, but for the reason that their purpose is to seal and not to be conspicuous( In the assembled engine they are almost invisible) I will, however, limit myself to the above-mentioned photo ;D
Review translated automatically
Reliable opinion
Mz Es 250/2 r. 1969 gaskets only krygielite such mounted orginally and such are also here Assembly was quick after cleaning the crankcases everything nicely adhered sealed can be folded to fit a large caplet under the head a concrete cylinder gasket and two on the gas tank 19mm I recommend
Review translated automatically
Reliable opinion
Romet Ogar 200 I overhauled the engine in the ogar and used these gaskets.The engine does not leak does not take air as well as oil.To be sure I lubricated the gaskets with silicone, but through my fault would have uneven adhesions.If you have a perfect adhesion is traditional gasket and grease.
Review translated automatically
Reliable opinion
Wsk 125, 1983. Gaskets that perfectly fit the engine for Wska 125. The set includes all the gaskets needed to seal the engine from the head, cylinder to the side lids. The workmanship of the gaskets very good, everything fits the engine.
Review translated automatically
Reliable opinion
Gmoto. You have very good parts I am very satisfied with my gaskets . Their workmanship is amazing , I will be ordering more and more from you from now on , overall I highly recommend it .Until my next order greetings
Review translated automatically
Reliable opinion
My machine is a 1982 ROMET OGAR 205 of 50cc. The seals fit well on the 2 speed engine. I installed them all in place and finally feel that the engine is completely tight.
Review translated automatically
Reliable opinion
hello super store very good customer approach fast shipping and.Shipping tracking is on the + and the parts for my project super napeweno I will use again gaskets for this price super.
Review translated automatically
Reliable opinion
The seals are of very good quality,they are fitted, and made of good material. I recommend to all who want to pay a little extra but have a decent product.
Review translated automatically
Reliable opinion
Excellent and original Grateful for me CZ had never got these original parts I hope everything looks good mainly the metal cylinder head gasket.
Review translated automatically
Reliable opinion
SIMSON ENDURO S51 - all gaskets fit nicely, no problems with installation :) Super thing when there is no problem.
Review translated automatically
Reliable opinion
Wsk 125 kos 80r.since after installing a set of gaskets to the engine I have peace of mind with leaking engine crankcases .These gaskets are really worthy of attention because cheap replacements are made of paper which is as it is lichen is a poor material for gaskets . I am very pleased with the results also with the proper fit of the holes , which match very well with the holes in the engine crankcases as well as in the accessories . I recommend this set of gaskets for people who are engaged in restoration of old and beautiful motorization which makes a person immediately have a better day . For such a small amount of money you can do a lot :D .The only, for me, tiny drawback is that the gasket that goes between the engine crankcases could also be made of kryngielite or another set that has such a gasket could be created .Regards .
Review translated automatically
Reliable opinion
Hello everyone, in the Gmoto store I made purchases of motorcycle parts for the first time - it was the so-called "small" and not needed "for now", I was more curious about the quality of service and, above all, the lead time. I ordered the parts on Monday, and on Wednesday morning the courier delivered the package. Compared to another store - I don't want to quote the full name here (M.et), but probably people who are interested in vintage motorcycles, came across it only once - like me, waiting for a month for the package. Summary: This should be the right approach of the store to the retail / individual customer, because in 90% of cases it is the time of processing the order that counts. I recommend the Gmoto store to everyone. Regards
Review translated automatically
Reliable opinion
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
Reliable opinion
This set of gaskets is the basis for any major overhaul of the ogar 205.The gaskets are of the correct size adapted to the factory dimensions of the various parts of the engine. Precise placement of the holes, after installation there is no unnecessary excess material sticking out. The price is at such a low level that it's not worth it to do hand-cutting, which is what some moped parts dealers offer. In a stationary store in my area I saw this set three times more expensive. In short: if you are trying on an overhaul, take it blind. Romet Ogar 205, model year 1987
Review translated automatically
Reliable opinion
I would recommend this site to anyone who wants to restore or repair an old as well as newer motorcycle. The site is perfect for people who are passionate about automobiles. The package came in no time, well packed. In my opinion, this site is better because of the inclusion in the package of a form in the event of return of goods, however, I do not think anyone uses it because this site sends what is in the picture and that immediately after placing the order. I heartily recommend this site to everyone !!!
Review translated automatically
Reliable opinion
Gaskets very thin, despite having the carbs in super condition like factory! No marks from screwdrivers or other unsealing tools. And so I had to use a thin layer of silicone for safety. In addition, the fit of the gaskets at an average level. Because of which, especially those from the carter, I had to "stretch" so that they fully covered the surface of the half, and not half in a given place. But it is possible to fold on it. ;)
Review translated automatically
Reliable opinion
I own a Junak M10 motorcycle. Visually the gaskets made neatly. I will be able to say something about the fit of all of them only after installation. I have only checked the seals of the side caps and the gearbox caps, and if they all fit like this it will be great. I give "Fitting" a rating of very good, by promotion, based on a "small sample".
Review translated automatically
Reliable opinion
Hello ! My name is Bartek, since childhood I am interested in motorcycles. Currently I own a Romet ogar 205.Last week I purchased a set of engine gaskets from you. The gaskets do their job, they are of good quality and there was no problem with installation. The gaskets helped and now I can still ,,go crazy'' on Romecik. Greetings !
Review translated automatically
Reliable opinion
The set of engine gaskets for the Romet 3-speed was sensational! Not only were they a perfect fit, but also did not cause any problems with installation. What's more, we had no problems with the delivery everything went smoothly and as planned. I would recommend to anyone looking for quality parts with hassle-free delivery.
Review translated automatically
Reliable opinion
Gaskets very good quality, they fit well to the engine. Although it's best to take the engine apart first and check if they will all fit, in my case unfortunately the cap gasket did not fit, of course this is not the fault of the selling company, they were 100% helpful. Unfortunately photos will not show, because the engine already assembled:)
Review translated automatically
Reliable opinion
Romet Ogar 200 and they fit quite well. Between the crankcases I did not use silicone and still does not leak. (but in general, in old equipment, however, between the crankcases I recommend using, in addition to the gasket, sealing compound, because it is known in what condition most of the crankcases in these equipment, but I just have in very good condition). I recommend:)
Review translated automatically
Reliable opinion
Romet 2-speed engine gaskets set are solidly made and effectively protect the engine from leaks. Installation is relatively easy, and the quality of the materials seems to be good. After several months of use, I have not noticed any problems with the gaskets. Overall, the product meets my expectations.
Review translated automatically
Reliable opinion
WSK 126 M06 from 1961. I haven't opened it yet but through the packaging you can see that this largest gasket has a different white color. To my eye it is made not of the same vertebralite as the others, but of a different material. I hope it's not cardboard because I can make such a gasket from a technical block myself.
Review translated automatically
Reliable opinion
Hi I am Patryk and I own a 1962 WSK 125 m06 z2 , and I buy all parts and accessories from GMOTO. The parts are always matched and good quality.They are well packed and protected in the package. I highly recommend this store just in time to buy parts for our vintage motorcycles.Regards
Review translated automatically
Reliable opinion
The product I bought on Gmoto.pl was delivered to me in the same condition as in the pictures, zero hidden defects, in my opinion, after the not high price, the product deserves five ★★★★★, I highly recommend the website Gmoto.pl, friendly service and reasonable prices of parts !!!
Review translated automatically
Reliable opinion
Greetings. I put such gaskets in the engine WSK 1969 year b1, the so-called two frame. They spoil well on all holes, nowhere on the outside do not protrude in excess, which is also important for aesthetics. Engine dry everything tight and well fitted. I recommend and greetings
Review translated automatically
Reliable opinion
Well what. Gaskets very good and fit the engine. Made of durable plastic, which guarantees that they will thoroughly seal our engines. As far as I can see in my 1981 robert mr 2375 oil does not leak, the gaskets when applied did not tear. so I highly recommend. ;)
Review translated automatically
Reliable opinion
Romet Pony. The cardboard gaskets fit great, coincide with every hole, I didn't have to cut them. Large set, you can seal the entire engine including the original carburetor. Gaskets durable, not easy to damage. Great product I recommend ;D
Review translated automatically
Reliable opinion
Junak M10 capacity 350 year 1962 I bought a set of gaskets for the engine. I recommend in the set there are all the gaskets, with the fit there is no problem everything fits as needed they do not stick out. Once again I recommend everyone should be satisfied like me.
Review translated automatically
Reliable opinion
MZ ETZ 250 1983. Gaskets of rather good quality. In my case they work without problems the only reservations I have about the lower cylinder gasket, the shape of which does not quite fit as it should. Nevertheless, after screwing it together, the connection is tight.
Review translated automatically
Reliable opinion
Romet ogar 205 1988. I bought the parts as a spare but I have done dozens of purchases in gmoto before and only once something did not fit but the part was replaced immediately and that is why I always buy from this company. Express order processing.
Review translated automatically
Reliable opinion
Jawa 50 mustang 1975. gaskets very good the engine runs perfectly.gaskets are perfectly cut what is interesting the exhaust gasket is kryngielite.it is also worth to lubricate the hermetic or some grease but for sure:)
Review translated automatically
Reliable opinion
Romet kadet year prod.1983 set is ideal for engine overhaul, you will find all the gaskets in it, including the head gasket, gaskets carburetor and exhaust The set does NOT include zemeringi and orings engine
Review translated automatically
Reliable opinion
Cardboard engine gaskets. Well-fitted to the shape of the engine, cardboard quite strong, aesthetic packaging. For my moped Romet Kadet M780. I have it since new, that is, since 1980. I also have a 1984 Honda CB 650 SC ;-)
Review translated automatically
Reliable opinion
An indispensable piece of replacement equipment for further trips as well as the home workshop. Part of good quality. Recommended. More about replacement equipment for distant travel at: http://125cmmieszanychuczuc.blogspot.com/.
Review translated automatically
Reliable opinion
Gaskets elegant Well-fitted did not cause any problem with installation One minus deserves the gasket between the two halves, because it is not made of kryngelite but of stiff paper WSK 125 M06B3 1984
Review translated automatically
Reliable opinion
CZ 175/487 Gaskets required delicate corrections regarding the position of some holes (less than 1 mm). The head gasket has a minimally too large outer diameter. Other than that, a good quality product.
Review translated automatically
Reliable opinion
I used this gasket set to regenerate my S51 engine. The gaskets fit perfectly and do not protrude. Unfortunately, the seals could have been a bit thicker, but they still hold tight.
Review translated automatically
Reliable opinion
The product keeps its promises, there are no unpleasant surprises. So far the quality seems to be good, but time will tell how long it will last.
Review translated automatically
Reliable opinion
Product as described, quality at a low price! Fast delivery to Germany! Very good, I am satisfied! ?
Review translated automatically
Reliable opinion