Motorcycle front sprockets (pass)
Manufacturer
Price
Sort
Browse Motorcycle front sprockets (pass) by manufacturer
Products reviews
2020-11-09, 07:58
Piotr
I have a motorcycle Junak 905.Its fault was that it does not accelerate in 4th gear, so I decided to buy a 12 tooth sprocket, because I have 13 as standard, so I ordered it.Once it arrived I immediately went to install it simply fit as standard. Now my junak accelerates in 4th gear.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-03-02, 08:14
Andrzej
Very good quality product I rode this sprocket 2 times and even the paint did not come off I highly recommend this product. This is the machine I ride and I take all parts from here. Regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-03, 08:49
Wojciech
The sprocket is very well made, its installation is simple. After several rides, I have not noticed any signs of wear, and I have noticed an increase in the speed of my motorcycle. Overall, I recommend it!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-23, 20:36
Łukasz
Quality ok everything fit without any problem, shipping as usual lightning fast I am satisfied with the purchase, fits perfectly to zipp tracker 125 2016r
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-07-20, 12:26
Sebastian
I highly recommend this zembstke.made of good material and fits 250 engines.Very carefully made and packaged
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 08:04
Monika
Front sprocket 428 12 teeth very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-11-04, 10:58
norbert
Derbi Senda SM Extreme 2018 year. The sprocket fits very well, is solidly made and highly recommended.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-05-14, 16:06
Michał
Romet Ogar 200 - the sprocket fits perfectly, does not wear quickly and fits perfectly, is well shaped. The sprocket is more suitable for mopeds in super condition, after a light tuning, otherwise the engine will not have the power to accelerate the vehicle on this gear ratio except downhill, three will be very distant, even unusable. Vmax increases by 10km/h, but, unfortunately, at the expense of acceleration and overall power - I recommend only for flat areas, where there is no wind. Z11 - 55km/h (mountains, climbs, offroad, dirt roads) z12- 60km/h (hills, gentle climbs, gravel roads) z13 - 65km/h (flat terrain, asphalt, no wind) The most versatile will be the 12z sprocket, where at low power starts we gain 60km/h, so that in the city we will reach a (real) speed similar to the cars moving past us.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-01-09, 09:49
Jacek
What much to say here, a legan sprocket for a 110cc Quad, for a moped with a 139FMB 50cc engine that is one of the most popular! :) In size 428, which is the "more durable" one, with an H end which means even better hardening and strengthening of the sprocket! Generally when you put it on it IS POWER! ^^ Because, of course, the smaller the sprocket in the front, the more power we have on the rear wheel! But less for the speed. For quads 110cc ideal solution! Because there the power counts the most! My Quad with this sprocket rolls up the asphalt! ;P And on the mud with the gas I have to be careful, because immediately the tunnel to China kicks! ^^ In short, I recommend!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:49
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:48
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:48
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-04, 13:49
Adrian
The parts offered by Gmoto motorcycle store are of the highest quality. Combined with a huge assortment, this store is highly recommended. Nowadays, unfortunately, it is hard to find parts that can enjoy high reliability and even tolerance in their workmanship. By sourcing from Gmoto store I am sure that each part installed in my vintage motorcycles will perform its function 100% and will serve a long time. Gmoto store is a very reliable company to which you can entrust the reliability of your motorcycle. Best regards and I wish you further success in creating an excellent reputation for the store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-23, 15:39
Tomasz
Sprocket of good quality fits perfectly to the original shaft I recommend this store to everyone because I bought in this store a lot of parts for wsk 125 and here the goods are of very good quality certainly a larger selection than on other auctions where you have to buy from different sellers which is associated with much higher costs, it is nice that there is such a store as Gmoto.pl which has a wsk department and virtually all parts store for 6 plus :) I really recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-06-22, 08:09
Krystian
The sprocket fits perfectly to the Junak RX One 125 Euro 4, despite the fact that on the store's website after selecting this version of Junak, there is information about incompatibility. Also, you can confidently order without worrying whether the screw spacing will fit. The only thing to keep in mind is to make sure whether there are actually 14 teeth in our beast or whether someone has changed to a smaller number. As for the quality I won't comment because the sprocket is freshly installed. But it looks solid. I think that for 10 thousand mileage it will be enough. Greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-08, 09:34
Dominik
Howdy.I purchased a 11 tooth front sprocket from gmoto.I was surprised that I only paid 10 zloty for this product as it is from a decent company.I own a street 50 moped and there were no problems with the sprocket.It fits perfectly on a 428 120 link chain.According to me,the power seems to have increased a bit but the v max has decreased.If we try a bit harder and shoot the clutch we will be able to ride on 1 wheel.I warmly and sincerely salute g moto for their excellent and quality products.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-28, 09:48
Piotrek
Hello, I have a quad 250 Chinese, I wanted to replace the front sprocket with a new larger one because the old one did not give a lot of speed and satisfaction, I ordered for quad 150 but surprisingly it also fits the 250 I had to move the exhaust pipe a little to install but even so the installation was very easy after assembling the quadzik laughs speeds up to 90 what before was not possible, a product worth recommending.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-10, 12:08
Robert
I have a honda monkey moped, I needed to replace the front sprocket and found the right one in this store. I checked the sprocket I received and it is a perfect fit, it overlaps the shaft perfectly and you can see that the teeth are flawless. The sprocket has the number of teeth embossed which is very helpful and this is a big plus. I am very satisfied with this product and after replacement the motorcycle rides like new.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-07-24, 19:45
Piotr
Toros El Viento 125 (Zipp Manic 125) with a 156fmi engine - the original sprocket has 15 teeth, the one with one more i.e. 16z solves the problem of short gears and high shudder. Riding becomes very pleasant, economical satisfying. Quality flawless, everything fits very well.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-03-30, 14:18
Zawen
I own a 2020 Apollo Avenger 125 Quad the sprocket was easy to install and I think it is made of durable material. It looks pretty good for the price, and fits like a glove. The 12 teeth fit perfectly, the chain is not too tight and the quad has better performance.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-02, 21:58
Jan
Hi there, I ordered a front drive gear for wsk125cm 1978r.I was surprised by the speed of delivery and packaging and most of all by the quality of the ordered product I think that now I will look more often and choose products from this company because I am satisfied with the quality.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-10-30, 13:37
MAREK
Mosquito Mosquito s38 1975-purchased parts are of high quality in terms of workmanship, aesthetics, efficiency of operation -I recommend many motorcycles I assemble and with this company super to cooperate-mega efficient shipping 24 hours to the other end of the Polish b.good contact with the seller.RECOMMENDED
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-20, 11:13
Adam
The sprocket seems to have been carefully manufactured, but unfortunately it is made of a soft material, which means that with frequent firing of the clutch the teeth can bend a little, but if you drive quietly I recommend this product, generally good for the price.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-03-12, 17:30
Daniel
Purchased for Romet Ogar 200, I wanted to leave the original 11z, but it turned out that it does not fit the new chain. This sprocket (incidentally, the manufacturer is Moretti) fits perfectly in the new chain (width of 4mm in the new one, in the original width of 4.5mm)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-05, 21:48
Miłosz
Romet Ogar 200 You have a problem with the speed in your bike? Order yourself a 13z toothed converter, nozzle 70 make small improvements on the engine and moped goes like hell! The quality of the product very satisfactory aesthetics of work with it also! highly recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-26, 20:19
Maciej
The sprocket fits perfectly on the shaft holes.14 teeth is the best gear ratio for the WSK'i, because it does not lack and first gear and 2 and 3 are correspondingly longer. With a healthy engine with this sprocket, the WSK can break traction even in 2nd gear
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-31, 12:48
Wojtek
So yes the sprocket I ordered is a very good fit for the Honda 450 and very nice to ride however ze first 2 days it was not nice to ride because the sprocket was popping off the shaft but on the 3rd day of riding it is fine I give 5.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-07, 09:54
Sebastian
The sprocket is solid where I need it in my motorcycle, the protection is also very good, the quality of the sprocket is also very good I heartily recommend any products from Gmoto. l good quality and fast delivery I recommend ;)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-30, 18:46
Krzysztof
Hello warmly. Parts ordered for the quad Spyrancing SPY 250F drift.( Generally parts for this model are hard to find)But the company Gmoto ourczęstantly has something for this model. I recommend express shipping
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-23, 10:07
Wojciech
Hello perfect for komar 2352 Made of good materials better than in the days of the Prl fits perfectly no signs of use after a mileage of 1000 km. Milling cutter fits perfectly on the shaft recommend g moto bdb parts
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-12-05, 10:37
Kacper
I own a Router WS 50 I installed this sprocket in 15minutes and I highly recommend it looks very nice and durable I highly recommend the sprocket has already traveled about 500km and shows no signs of use. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-12-26, 11:00
Sylwia
The quality of the product very good. Delivery even faster ordered on Monday delivery on the second day the first time I met with a fast delivery I am very satisfied with the product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-11-04, 15:21
Wojciech
I own a Quad with a Zongshen 250 liquid-cooled engine. The sprocket fits 100% Made of good quality material, after several "specific" trips no signs of fatigue of the material.I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-18, 21:08
Wojciech
Loncin 300 sprocket fits like a glove. After several trips you can not see any signs of wear, the new chain does not come off it so the dimensions of the teeth are as correct as possible. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-01-22, 14:59
Gracjan
I recommend ✌️pasuje for Honda MB 80 1980 installation mileage very fast the sprocket as in the description is 12z you can see that it is made of durable material for this price I highly recommend it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-28, 12:44
Piotr
For gb street 50 fits perfectly. Installation on the seger ring is child's play, everything fits perfectly, the quality of the sprocket very good. I am satisfied, I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-07-21, 12:35
Chosiński
The product is consistent with the original. Well packaged. Conforms to the description. On the other hand, no information about the fit to my motorcycle. Very good contact with the seller.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-28, 13:16
Piotr
Everything fits like a glove. The quality of the sprocket a little worse than the original, but it should still serve a lot of miles. Very fast shipping and great service. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-11-18, 14:37
Krystian
Good quality at a very good price.It is worth paying attention to the spacing of the security holes, because it may be minimally different from the spacing for the screws in the toebox.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-01-30, 15:01
Filip
Zembatka in accordance with the dimensions given in the product description performance I rate it 9/10 I have been using it for 4 weeks now and really little wear effects I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion



























