Forgot password
Order status
Free delivery from euro
W55 - Motorcycle parts
Manufacturer
Price
Sort
Podobne:
£70.61
CDI ignition non-contact stator 12V Romet Ogar 205 Motorcycle Komar - 1249180
(3) 
Options +2 £10.70
Plate - sheet on motor gaskets kryngelite Gambit AF-Oil thickness 2.0mm 375x500 mm
(5) 
Options +2 £8.23
Plate - sheet on motor gaskets kryngelite Gambit AF-Oil thickness 1.0mm 375x500 mm
(5) 
Browse by manufacturer
Products reviews
Junak M10. Visually the screws look nice. fit and with installation there was no problem screwed in. Without a problem. But the head of the screw, when fully tightened, does not reach the attachment at the handlebars to the handle. The play remains. It looks as if the underthreading behind the thread is a deco too long. The handle also flies as it wants, you know It is necessary to lean a little on the subject and improve something there. Unfortunately I do not have the org. screws to compare. It is known that this is a Junak and everything needs to fit together individually. As for the performance of the product I have no reservations.
Review translated automatically
Reliable opinion
The bushing is not suitable for the Osa M52! 1). Outer diameter of the bushing too small ; it is Dz 20mm, should be Dz 22mm, 2). Width of the bushing - is S=20mm, should be - S =22mm. I purchased pieces of 4. Greetings : Czeslaw Ratajczak
Review translated automatically
Reliable opinion
SHL M11 175ccm 1965r Parts of very good quality fit very well, well matched parts, recommend.
Review translated automatically
Reliable opinion
Quality super already looking forward to the final result. I am currently in the process of reactivating a WSK 125
Review translated automatically
Reliable opinion
romet 50t1 fits works strong spring recommend fast shipping
Review translated automatically
Reliable opinion
The product made in very good quality. I was very surprised by the quality of the cables, they are very soft by which they are flexible, which means that they can be hidden in an invisible place. very nice and aesthetically pleasing workmanship, until it is a pity to cover with a cover. Installation very easy, even 0 setting, installation and the motorcycle fires up. Much more convenience than ignition with platnki. For a minor minus I could add the installation of the ignition coil on the tritite, a little incompatible with the high quality workmanship of the product. Overall, the product is very good, driver-friendly.
Review translated automatically
Reliable opinion
Jawa 50 armored type Super product, perfectly holds the plate. They look identical to the original ones. I have no reservations about the rivets. Carrying out the renovation of the motorcycle are irreplaceable. Wanting to paint the frame, you need to remove the plate and the old rivets do not properly hold the element. I recommend
Review translated automatically
Reliable opinion
Rivets may be expensive for such a triviality but they are great. Gently swollen in the middle with grooves that cut into the material of the hole. Thanks to these advantages, it is not necessary to seal the rivet, Just drive the rivet and it holds the plate perfectly, at the same time it does not interfere with the installation of the post.
Review translated automatically
Reliable opinion
When I got the rivets I was slightly disappointed, because they seemed too small. They were going in loosely in the hole of the pinion and the taker. I took a chance and got dibs. It turned out that they are not too small at all. The pinion is holding up nicely.
Review translated automatically
Reliable opinion
I own a Komar 2350 from 74r with s38 2 gear engine . Axle fits perfectly but it is a pity ze bearings for it are in a separate auction you have to search a little. The solution is better than the old garlands. I recommend.
Review translated automatically
Reliable opinion
I rate the quality of this holder as very good I could not all the time fix the spring, but I bought this holder and succeeded aesthetics at a high level. The holder fit perfectly to Romet Ogar 205.
Review translated automatically
Reliable opinion
I own a Rometa ogara with a 50ccm yawl engine The parts are of very good quality, I did not have to struggle with their installation I heartily recommend if you want good parts :D
Review translated automatically
Reliable opinion
Worthless product. The place of bearing seating- the middle part of the axle has a smaller diameter( 9mm) than the thread ( 10mm). The bearing after installation has a play on the axle of 1 mm.I advise against the purchase of this product
Review translated automatically
Reliable opinion
Motorcycle Junak M10, year of production 1962 The purchased parts met my expectations. Installation difficult due to the need to put the shock tank paws through the frame.
Review translated automatically
Reliable opinion
Spars made perfectly fit very well gluing went well but you need a lot of patience if you don't have it better not to tread for it I highly recommend it
Review translated automatically
Reliable opinion
Ogar 200 Product as described fast delivery and good contact with the seller store worth recommending. And really careful protection of purchased items .
Review translated automatically
Reliable opinion
Rivets a little too long, but better too long than too short, however, it is worth to cut them riveting very easy possible hot and cold good price, I recommend.
Review translated automatically
Reliable opinion
Wsk 125 year of my motorcycle 1977 the rivets fit the clutch basket without any modifications the installation went pardzo well the product is of very good material
Review translated automatically
Reliable opinion
The nameplate rivets do the job, they fit perfectly and reflect the communist era. The 1982 WSK 125 motorcycle highlights the restoration details thanks to the rivets. Recommended.
Review translated automatically
Reliable opinion
WFM M06 ENGINE S34 TANK MOUNT BELT MADE TO MATCH THE ORIGINAL LENGTH CORRECT. RUBBER QUALITY WILL DETERMINE THE TIME OF USE. WORTH RECOMMENDING FOR THIS PRICE.
Review translated automatically
Reliable opinion
Very good quality product, everything fits perfectly, made of decent material, so I know it will last a long time. I recommend parts from the store.
Review translated automatically
Reliable opinion
Product as described, price very good. shipping very fast. I recommend as much as possible. I am most satisfied with the quality and speed of shipping
Review translated automatically
Reliable opinion
Product as described, price very good. shipping very fast. I recommend as much as possible. I am most satisfied with the quality and speed of shipping
Review translated automatically
Reliable opinion
Rivets not yet used but I tried them on and they fit perfectly the price is a bit staggering but I can understand it because who will run around the warehouse and look for a rivet for 30 cents
Review translated automatically
Reliable opinion
Hi. The counter frame bends very well on the counter, it is toned not glossy cover to exaggerate. I really recommend the frame Ok Greetings
Review translated automatically
Reliable opinion
WSK 175 of 76. The base is made correctly. Original shapes, dimensions are preserved, which makes it look factory after replacement and painting.
Review translated automatically
Reliable opinion
Romet ogar 205 changing bearings to ball bearings is only the axle from gmoto.pl Material good quality thread ok. I have seen the quality of others and recommend only from gmoto.pl
Review translated automatically
Reliable opinion
I recommend one hundred percent, Store trustworthy and if you have any doubts about the purchased item , there is a quick response from the store on email
Review translated automatically
Reliable opinion
The rivet has a slightly too small diameter of the head to rivet the plate to the Shl-ki m11. You have to give a washer so that the plate does not fall off.
Review translated automatically
Reliable opinion
Wsk humpback 125.Rivet perfectly reproduced on the original.Looks good and holds the plate very well. Super quality for so little
Review translated automatically
Reliable opinion
Rivets used on the WSK 125, easy installation, designed to be hammered into a specific hole for plate mounting, no need to tap.
Review translated automatically
Reliable opinion
The product is well made, it is not some fake, it fits perfectly. I recommend this product and encourage you to buy because it is worth it.
Review translated automatically
Reliable opinion
Romet Ogar 200 Good quality goods. Unfortunately the axle did not fit the bearings, but after sanding with sandpaper everything OK.
Review translated automatically
Reliable opinion
Product as described by the seller. Super quality and full reproduction of the original. I definitely recommend shopping at gmoto.pl !!!
Review translated automatically
Reliable opinion
Java ts 350. rivets fit very well. The right length and width. They do not interfere with the front skewer in operation.
Review translated automatically
Reliable opinion
product well made steel in galvanized fits without a problem after adding reflectors will look aesthetically pleasing on the motorcycle
Review translated automatically
Reliable opinion
Romet Komar 2350 Product as described on the website Installation to the vehicle went without any complications I recommend.
Review translated automatically
Reliable opinion
Very well made product I am 100% satisfied it fits perfectly and will help me a lot in rebuilding my motorcycle
Review translated automatically
Reliable opinion
Wsk m06 b3, 125ccm, 1974.The installation went without a problem, the performance of the product I rate 10/10.Goods worthy of its price.
Review translated automatically
Reliable opinion