Motorcycle parts
Lifan Rocket 125

2018-11-12, 15:59

View original

Krzysztof

Honda Africa Twin XRV 750 1999. The piston fits the calipers on older models, the pistons for my motorcycle are 3mm shorter. I ordered the set with the idea of shortening it. The material turned out to be soft compared to the original(this does not prove its strength, therefore the rating of 3 from the quality), cutting 3mm on the lathe did not overheat the pad and after protecting it on the turning side with an appropriate specific will ensure that it will not lose its anti-corrosion properties. A perfect replacement for the twice more expensive original. The width agrees, the quality of the seals seems to be OK, after installation it does its job - I recommend.

Review translated automatically

Reliable opinion

2018-11-02, 09:29

View original

Aleksander

WSK 125 75r | The frame fits in the org. holes in the rear lamp mount. I recommend, because this product is worth its price and it is practically indispensable in the mounting of the plate.

Review translated automatically

Reliable opinion

2020-04-28, 09:34

View original

Piotr

In this price range, there is nothing to complain about. The product will do its job. It should certainly survive more than one motorcycle trip.

Review translated automatically

Reliable opinion

2020-04-12, 13:22

View original

Piotr

The product perfectly replaces the original part, after replacement the pump is tight. For this operation, it is worth buying a gasket and oring.

Review translated automatically

Reliable opinion

2025-06-24, 10:55

View original

Ahmed

I ride a 2016 Yamaha MT-03 and recently treated myself to the HifloFiltro HFA3106 air filter - and I'm really impressed with it. Installation was child's play, the filter fits well into the air filter housing without any trial and error or pressing. Just the way you want it - simply remove the old one, insert the new one, close the lid and you're done. The workmanship is first-class, as you would expect from HifloFiltro: clean seams, sturdy material and an all-round high-quality impression. In terms of performance, I definitely notice a small improvement. The throttle response is a bit more direct, the engine feels a bit freer when accelerating. I ride the MT-03 a lot in city traffic and also sometimes on winding country roads - with the new air filter, the throttle response subjectively feels a little more lively, without me having changed anything on the ECU or the exhaust. So there really does seem to be a noticeable difference due to the air flow. Another plus point is that the HFA3106 is in no way inferior to the original filter, but is much more attractive in terms of price. Especially if you do your own maintenance, you can save money here without sacrificing quality. The filter is manufactured to OEM standards and is even TÜV-tested, so you can be absolutely sure of its performance and durability. I've now used the air filter for several hundred kilometers, even in light rain and warmer temperatures - no problem, everything runs smoothly. If the filter gets dirty at any time, it will be replaced with the same one without hesitation. Conclusion: If you ride a Yamaha MT-03 (2016) and are looking for a reliable, precisely fitting and high-performance air filter, the HifloFiltro HFA3106 is the perfect choice. Top quality at a fair price - a clear recommendation!

Review translated automatically

Reliable opinion

2016-09-09, 10:49

View original

Rafał

I bought this kit in the store with the information that it may not fit the cbr 250 but I made an aluminum ring on the wall 0.65mm height 0.80 mm circumference 30.00mm inner circumference 28.70 and it fits the rest of the dimensions is the same thank you for reliable information seller price in the service is 240 PLN and the ring cost me 10 PLN at a friend turner and everything is fine I recommend

Review translated automatically

Reliable opinion

2022-03-09, 09:06

View original

Adrian

Unfortunately, the frame is made very poorly, due to carelessly cast material at the edge, the license plate does not fit and it is impossible to close the latches. It is better to spend a few zlotys more for a better quality product that will have the correct dimensions. Despite the not too bad aesthetics, I advise against the product, it does not serve its purpose.

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2023-05-29, 13:00

View original

Mariusz

Yuasa is simply a legend among motorcycle batteries. So, if you value convenience of use and simplicity in activation, then there is the battery you are looking for. In terms of price I will say that although cheap it is not cheap, in retrospect it still comes out the cheapest. I recommend for any Moto.

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2023-07-15, 05:33

View original

Kamil

Frame very cool massive with a cool composing company logo unfortunately I did not use the purchased item because my board is smaller than I anticipated ? but the frame itself I highly recommend as I will measure the size of the board I will order another one like it

Review translated automatically

Reliable opinion

2024-01-11, 07:04

View original

Jacek

The element is made of good quality plastic, allows for repeated mounting and dismounting. The number and size of the mounting holes allows you to conveniently adjust the mounting of the element. Shape and aesthetics of workmanship at a really good level

Review translated automatically

Reliable opinion

2022-01-24, 07:32

View original

Bogusław

License plate frame very solidly and aesthetically made, the size of the plate perfectly matches the size of the license plate, the mounting holes of the frame even fit into any bracket that are found at the motorcycle.

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2019-05-17, 13:57

View original

Przemysław

Honda St 1300 126 hp 80k hp 2002r , I bought the motorcycle in the commission and there standard commission frame, a little diso-polo with such a ride that's why the frame with the inscription HONDA will perfectly match the new machine ;)

Review translated automatically

Reliable opinion

2020-05-25, 08:45

View original

Jacek

Honda cbr 1100 xx, bearings for the wheel work great. Quality and fit ok. protection from water and dirt is much better than in the previously worn. I recommend.

Review translated automatically

Reliable opinion

2021-03-20, 11:29

View original

Bartosz

The motorcycle is a Honda Transalp XL 600 The piston holds the dimension perfectly in every plane. The only difference is the different shape of the bottom of the piston, but this does not seem to affect the operation.

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2023-07-28, 07:41

View original

Adam

Parts ok . Installed in Yamaha XT 660 X. However, it is also worth replacing the oil sealer which is not included in the set. Customer service super and shipping lightning fast.

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2019-03-29, 10:25

View original

Roman

I have 2 old oilers reliable equipment frames fit like a glove I bought 2 pieces well fitted to the dimensions of the board simple to use good material highly recommend

Review translated automatically

Reliable opinion

2019-04-27, 15:09

View original

Tomasz

Honda Vfr 750 rc 24 from 1987. The fit of the parts is very good making it a pleasure to assemble the exhaust system. It met my expectations as much as possible.

Review translated automatically

Reliable opinion

2020-04-04, 11:14

View original

Adam

Romet scmb 125, I bought a frame for the reg plate.Appearance , size, quality, price - very good. I recommend! Delivery prompt and well packaged.

Review translated automatically

Reliable opinion

2024-03-13, 08:43

View original

Piotr

What to write. A lot of screw cutouts to fit and screw centrally in each vehicle. Also in a Chinese electric. Fits like a glove.

Review translated automatically

Reliable opinion

2025-03-03, 10:37

View original

Juan

All correct and within the delivery time I think quality. Price is quite good. I would order again if I need a replacement. Thank you

Review translated automatically

Reliable opinion

2025-06-17, 11:39

View original

Thomas

Everything is fine! Battery was quickly filled and ready for use. How long it will last remains to be seen, but so far there have been no problems

Review translated automatically

Reliable opinion

2020-06-03, 14:10

View original

Paweł

Sprocket made of good material and perfectly fitted. Thanks to the rubber damper, the drive vibration at low speed is not transmitted to the chain.

Review translated automatically

Reliable opinion

2021-11-11, 16:39

View original

Paweł

Benelli TNT 125 quick and easy installation for everyone. Shipment ordered for parcel machine shipped quickly. I recommend this product to everyone as well as the store.

Review translated automatically

Reliable opinion

2020-06-08, 10:06

View original

Łukasz

I am satisfied everything efficiently and according to what I ordered. The ordered goods meet my expectations. I positively evaluate this store.

Review translated automatically

Reliable opinion

2022-01-31, 08:22

View original

Wojciech

This is not the first time I have ordered from Gmoto yet I have not been disappointed shipment always fast on time products also as described I recommend

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2024-05-03, 07:40

View original

Grzegorz

Great Battery, after flooding and charging it works like a bad thing :) i am very satisfied. Packaged safely and professionally.

Review translated automatically

Reliable opinion

2025-05-10, 16:04

View original

Lucas

No problems at all. They work perfectly on my Suzuki DL650 Vstrom. Idle is much cleaner with new spark plugs - it makes a big difference.

Review translated automatically

Reliable opinion

2023-08-14, 15:03

View original

Janek

I have not yet assembled and do not know how with the fragility of the plastic, but from the outside it looks positive. On the back a slight unpainting.

Review translated automatically

Reliable opinion

2020-12-28, 09:34

View original

Tomasz

The locking element of the plate falls out, so I screwed it on. Once I had a similar patent and lost the plate, then I did not screw.

Review translated automatically

Reliable opinion

2022-04-11, 15:01

View original

Konrad

Very good workmanship, prompt delivery. Implementation in accordance with the order. Product definitely worth recommending.

Review translated automatically

Reliable opinion

2020-05-25, 21:10

View original

Paweł

The frame mounted on the motorcycle and from today it pleases the eye, I did not want to drill the boards and with the product I am satisfied.

Review translated automatically

Reliable opinion

2020-08-24, 18:28

View original

Arkadiusz

It's a pity that in the feedback there is no option of feedback to deliver, here you should be rated three, the rest as in the best order

Review translated automatically

Reliable opinion

2024-05-03, 06:48

View original

Michał

Everything in the best possible order. Frame made of good quality plastic, sheet metal fits it and holds well.

Review translated automatically

Reliable opinion

2021-02-02, 18:03

View original

Piotrwien

Instant shipping products as described very good contact with the seller. I recommend with a clear conscience.

Review translated automatically

Reliable opinion