Forgot password
Order status
Free delivery from euro
Motorcycle swing arms
Options +1 
Browse Motorcycle swing arms by manufacturer
Products reviews
The new bushings are significantly smaller than the original. The length is: 39mm, while the old bushing was 70mm. Thickness at the narrowest point: 25mm, while in the old bushing it was 2.4mm. Thickness at the widest point: 30mm, and in the old bushing also 30mm The diameter of the hole is 20mm, and in the old bushing 1.8m. After being hammered into the rocker, the bushing works perfectly.
Review translated automatically
Reliable opinion
Unfortunately I am disappointed, the bushings do not fit Romet Ogara 205, to anyone who is trying to buy them I suggest taking detailed measurements (gmoto store added the dimensions only after my complaint, which I evaluate very positively).
Review translated automatically
Reliable opinion
Hello bushings do not differ from the original I own a wfm 125 and restore it and przktycznini all parts I buy from you because you have the most and prices affordable
Review translated automatically
Reliable opinion
Fits perfectly no problems with installation rear works flawlessly part made correctly as you can see in the attached photo recommend solid company
Review translated automatically
Reliable opinion
Fits perfectly, the material okey, a little shorter than the original, but it does not interfere with anything and everything works nicely. I recommend without hesitation.
Review translated automatically
Reliable opinion
Romet ogar 205 1989 year Bushing fit, installation went smoothly I recommend Problem with the play of the rear control arm solved Easy and quick replacement
Review translated automatically
Reliable opinion
Everything according to the description. Very good workmanship. Everything fits perfectly. I recommend.
Review translated automatically
Reliable opinion
Ogar 200 88' These bushings are a real g#wno :) At first glance everything looks beautiful, seemingly nicely made. Problems began when trying to seat the bushing . It turned out that it was completely the wrong dimension. The sleeve got stuck, I had to scoop it quite aggressively risking damage to the paint coating. When I finished seating it turned out that the metal bushings are not aligned at all, and during installation I again had to use a hammer, because after installation their inner diameter became smaller :) in the end everything worked out, but I do not recommend the product. And no, it was not a manufacturing defect and I will not return the product because I do not have time for that. This is a frequently reported defect.
Review translated automatically
Reliable opinion
Terrible crap, one bushing is crooked, the naked eye can see that it does not hold the dimension. The second thing, the inner metal bushings are not bushings but tubes, you can see the boss from the weld!!! If I mount it about the soot on the axle, it will immediately dislodge the axle. I would send it back g. But somewhere I sowed the receipt. Do not buy, for this money any turner will make you better.
Review translated automatically
Reliable opinion
Hello I bought control arm axles for my Stallion 200, of which I have 4 pieces. The axles fit my mopeds perfectly. The plastic bushings have an additional metal bushing inside which affects the handling of the moped. I rate the workmanship and aesthetics of the axles and bushings at 5+. They fit perfectly after dismantling the worn ones.
Review translated automatically
Reliable opinion
Romet Ogar 205 50cm3 1987 To hammer the plastic bushings into the control arm you have to work a little hard (at the beginning I had a problem and had to grind a little in the middle of the control arm hole so that the bushing could enter into place fairly smoothly) but it was worth it, everything fits no backlash. I recommend, this product.
Review translated automatically
Reliable opinion
The axle itself differs from the original, where the original one has a sort of made thickening on the axle, but nevertheless it fits and does not interfere with anything. The bushings are slightly different, but it also does not make any problems in installation. (Romet Ogar 200 50cm3)
Review translated automatically
Reliable opinion
Everything fits as it should, a little oil and sits elegantly, the material very good and above all hard, workmanship aesthetic , no burrs after machining. I buy on gmoto since June when I bought my wsk and so far I am satisfied.
Review translated automatically
Reliable opinion
shl m11 sleeves very good quality, the advantage is that the inner metal sleeve has a larger diameter, this provides greater stability /compared to the original version /, Precise dimensions, Installation without problems,
Review translated automatically
Reliable opinion
My motorcycle Romet Komar 2350 from the year 1975 I bought the control arm axle fit super, the product as described compared to other ads on other sites. The product I ordered fit like the original the same dimensions.
Review translated automatically
Reliable opinion
I think that the product is worth recommending, the suspension works without any stress and play. The product is really made of good materials, of course, everything as well as delivery in a perfect way zosatatało sold.
Review translated automatically
Reliable opinion
I own a Romet Ogara 205.Some time ago I purchased this axle and I am pleasantly surprised!Installation mileage without any problems.It deviates a little from the original,but otherwise you can not see any difference.I highly recommend.
Review translated automatically
Reliable opinion