Motorcycle wheel rims
Manufacturer
Price
Sort
Browse Motorcycle wheel rims by manufacturer
Products reviews
2020-03-10, 09:57
Janusz
I have 3 motorcycles two shl and osa m50. I acquired all of them in agonal condition, and with the help of gmoto.pl managed to restore them 100%. When ordering the parts I needed, the most important thing was the quality and the description for which model the parts are intended. All this I found on gmoto.pl the quality of workmanship is high, precise descriptions exclude the risk of confusion in ordering parts, which saves a lot of time. The service is very professional, which I don't think I need to write about and only encourage you to convince yourself of this in person. To the opinion I attach a photo of the rims and spokes that I bought at gmoto.pl - the effect speaks for itself. With centering also was not much of a problem because the rim is straight and forcibly made, and the centering itself is the tension of the spokes and correction of minor deviations from the axis.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-20, 23:04
Damian
I ordered from you parts for wsk 125 quality and workmanship I rate 11/10 I am very satisfied and with a clear conscience I can recommend this parts site to anyone who assembles their motorcycle everything mapped perfectly fits without any problem. As for shipping I have no reservations everything is on time and very solidly packaged I order parts from you quite often and not once was I disappointed. Very cool thing is that at any time I can call you to find out whether you have such a part and whether it will fit the model nice service fast shipping. I highly recommend and say hello!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-06, 09:28
Dawid
Komar 2350 - The rims fit idELY, complete with spokes and rivets also from Gmoto, everything meshes beautifully. The workmanship of the rims in general good, the layer of chrome solid, in some places delicate scratches that can be eliminated with a little work. At one rim in the place where the apron comes, there remained an unsanded weld covered with chrome. Also gently had to be corrected so that nothing would happen to the inner tube during the ride. The product is worth recommending. Quality for the price is a big plus. Gmoto once again does not disappoint!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-09, 09:34
Henryk
The rim is made very well.The braiding of the spokes did not pose any difficulties due to the correct shape of the holes.All the dimensions of this rim correspond to those that were installed in mass-produced motorcycles.The chrome is really good quality.I recommend to all those planning to renovate their unicycle , and you will find that it is really worth buying.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-30, 23:20
Adamsky73
WSK 125 1984. When on your original rims after chrome is only a memory - the way out is one - these rims. The original bracket gives us the possibility of mounting on the original drum. Centering is a pleasure - the rims are straight, the coating is very durable. The first copies have been driving at my place since 2018 I think - no problems.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-30, 23:12
Adamsky73
Romet Kadet M780 1985. The rim is an excellent replacement for the original. Braid and nipple sockets as needed. Galvanic coating also at a high level. The place of connection (ground weld) is a little annoying when centering, but there is no tragedy. After mounting the tire, there is no trace of this.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-10, 18:43
Jan
Jawa 50 mustang 1979 The rims perform very well. They look nice, in my opinion unnecessary engraved on the rim 16x1.60 but this is a detail. I recommend them as much as possible. Good way to avoid expensive chrome plating of old rims.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-11-28, 08:20
Klaudiusz
Very good quality, no scratches/imperfections of any kind in production. They fit perfectly, nothing needs to be reworked etc. I'm adding a photo that shows the appearance of this rim. Compared to my old ones the difference is colossal! I highly recommend!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-06, 08:52
Jakub
Sismson s51, the workmanship is solid, you can see that it is made of good materials, it does not deviate from the original, the fit is perfect with the original hub, it looks really great when assembled and it is a recommendable product Greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-18, 11:23
Kacper
Oh man such an effect I did not expect ! New rims gave a great shine and new life to the wheels of my Ogara 200 which I am renovating :). The old ones could not be saved so for this price there is no need to think twice !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-22, 09:45
Kamil
The rims take a beating on the weld. Inaccurately done a bit. They look nice, but we'll see what happens to the beating when I put the engines together. I hope I can center it through the welds after all. Romet Ogar 200 50cm3
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-10, 15:32
Jakub
Romet Chart 1987, rim for this money very good. It presents itself great on the motorcycle. When braiding the wheels there were no problems, the nipples fit well. There was no difficulty in centering the wheel.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-17, 11:28
Dariusz
Rims of very good quality. I have an Ogara 200 year 1987, the equipment got a new shine thanks to these rims. I recommend to everyone. Once again, I was not disappointed with Gmoto products. RECOMMEND.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-26, 21:10
Paweł
A low-cost alternative for restoring a Wsk-i. Problem with spoke braiding, mirroring. But it can be dealt with. The inner spokes of the drum go on the outside of the rim.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-25, 10:55
Mariusz
I rate the product very highly. The product is very good quality, aesthetically made. The quality of the chrome very good. Definitely a durable hoop at an affordable price.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-03, 19:16
Adamsky73
WSK 125 1975 Merchandise for several years consistently at a high level. Quality of materials, coating and reproduction of the original at a very high level.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-05, 07:40
Karol
Junak M10 1962. The wheel rims and most importantly all the parts I have bought from Gmoto so far are of the highest quality and meet the requirements.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-10-04, 05:12
Francisco
Decent finish for the price it has. the welding is quite noticeable, but it seems good material. We will have to test it to see the result.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-10, 22:52
SŁAWOMIR
Well the rim as the rim of the patient Awo 425T , but a little does not fit the pattern. I have to sleep on it but I think I'm going to plot it, it will be rich/chrome/.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-17, 10:07
Marcel
Romet Ogar 205 1988r 60cc beautiful chrome solid quality workmanship wheels without any problem can be centered recommendable product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-21, 17:29
Marcin
Product solidly made quality very good I recommend these rims They look very nice on a motorcycle
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-09-21, 19:52
DANIEL
Beautifully presented at the ready. I recommend a very good product. The shipment arrived on time with no delays.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-12-12, 10:41
Marek
Wsk 125 year 1983 rim well made spokes complete chrome very good not scratched. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-07, 14:19
Nikolay
Pannonia 250 Wheel rim 19 inches x 1.85
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-07-13, 09:40
Jarosław
I rate taking into account the price. Chrome laid over nickel. It looks not bad and it would be hard to ask for more. At the point where the rim profile is joined, the weld machined very quickly - here it certainly could have been better. The spokes offered as a set with the rim are not very well matched. On the one hand, they are very nice, but a little too thick (the braiding has to be done by placing all the inner spokes at once because later they are too inflexible and the holes are too small to put them into a partially braided wheel). The spoke pins too tight - they were sticking in the holes. Unfortunately, I had to ream the rim holes to a larger diameter - violating the chrome layer on the holes. :( Overall for the money it is very ok, and for a WSK it is a very good standard. The look is super good because with the thick spokes we create a very good visual effect. Balancing the rating is such a solid school four is ok.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-14, 10:51
Paweł
Good morning ! When ordering the product and reading other comments I was afraid that actually the spokes would have to be bent and that they would be poorly made. The truth is quite different - this rawka for this set has differently exiting holes for nipples. The spokes are made well and the nipples screw nicely, but the rawka medium spoils to the original hub. After three hours of braiding and combining, I managed to get the new spokes, rawka and the old hub to work together nicely on the road. Some of the spokes had to be slightly bent, but this is not because they are bad, but the rawka is different from the original one from wsk. As for the rawka itself, its workmanship is very good, apart from other nipple holes. For this price it is worth to buy and play with braiding
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-01-12, 18:45
Sebastian
I own a Romet Pegaz 700 moped, from 1973, and I purchased the wheel rims with the idea of restoring the vehicle. When I received the shipment, I immediately started installing them, which went without any problems. The rims are perfectly reproduced on those that were produced in the '70s. The workmanship and chrome are of high quality. I definitely recommend this product to lovers of old vehicles.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-09-23, 20:51
Jarek
Wsk 175. with the rim is such a problem that the directions (angles) under the spokes are in the opposite direction than the original. I suggest that under the wheel rim, give it to a very good professional. Because the matter is not at all simple and cheap, .As for the rim itself. It presents itself very nicely and is the so-called wide rim . The outer dimension is 70mm.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-28, 21:28
Paweł
Rim well made. Solid to the chrome well made. No visible welds on the outside. In my opinion, a very good replacement to restore wsk to the original. The price is most adequate to the quality. The cost of the original rim alone to chromium plating is very high, so I recommend it with a clear conscience.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-08-14, 08:48
Jan
I will say frankly that I expected a better quality of workmanship. A thin layer of chrome, which did not fully cover the irregularities of the rim. It's hard to say how the rim will look after some time of use, if it doesn't get rust, then for this price you can turn a blind eye to the poor quality of the plating.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-31, 09:40
Miklós
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-31, 09:40
Miklós
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-07-16, 21:57
Adamsky73
These are no longer the same rims as a year or two back. They have the size and year of manufacture engraved on the rim. For a classic it's profanity, but when there's no choice. Coating and fit at a high level. Easy to center. Please add that there is "engraving" on them and update the photos.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-23, 22:03
Mirek
The kit installed for a moped Jawa 50, the kit, although dedicated to moped simson due to the diameter of the spokes, but after reaming to the required dimension gave to install in hubs from Jawa 50. Assembled whole looks "racy" in the subjective feeling better than the original.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-19, 07:25
Francisco
Chrome-plated steel rim. I find it very solid and with an excellent finish. The finish is very good, especially in the spoke holes. It is a perfect option to replace old or deteriorated rims. Much better than restoring old rims.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-06-13, 10:26
Tomek
Rim very nicely made chrome carefully made on the model of the original dimensions all agree as the original. Strong solid very beautifully presented I recommend as much as possible for WSK motorcycles as for this price I am satisfied.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-05-18, 22:24
Robert
Wheel rims for WSK I recommend, the spokes that came in the set can be braided without a problem, unfortunately, they are a little deeper bent than the original and very slightly stand out, it is not a big problem, rather a trifle, with mounting there is no problem.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-10-15, 16:29
Migeotte
Nickel, top, I recommend the site to all my friends. Article ordered and received in record time. Reviving my old bikes with your products is just perfect. I'll be ordering again in the near future. Super
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-11, 00:41
Marcin
Chrome of poor quality. Large kink at the rim joint. Sharp hail in the valve hole. Nipple holes too tight and do not fit. I bought the same set about a year ago it was 10% cheaper, better made and it fit. I DO NOT RECOMMEND
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-03-07, 10:40
Anna
For WSKi is already a wheel rim well and mine is also cheerful! The rim in great condition well and I am waiting for "flying". A small overhaul and I'm done, and the comment "GMOTO" I will exhibit: nice and efficient madly, their other name is "satisfaction!!! :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion







