Forgot password
Order status
Free delivery from euro
Swing arm bushings
Manufacturer
Price
Sort
£13.44
Lowest price from 30 days before discount: £28.10
delivery 0 £OEM Control Arm Bushing Suzuki SV 1000 03-07 - 141358
from 2
Browse Swing arm bushings by manufacturer
Products reviews
The new bushings are significantly smaller than the original. The length is: 39mm, while the old bushing was 70mm. Thickness at the narrowest point: 25mm, while in the old bushing it was 2.4mm. Thickness at the widest point: 30mm, and in the old bushing also 30mm The diameter of the hole is 20mm, and in the old bushing 1.8m. After being hammered into the rocker, the bushing works perfectly.
Review translated automatically
Reliable opinion
Unfortunately I am disappointed, the bushings do not fit Romet Ogara 205, to anyone who is trying to buy them I suggest taking detailed measurements (gmoto store added the dimensions only after my complaint, which I evaluate very positively).
Review translated automatically
Reliable opinion
Hello bushings do not differ from the original I own a wfm 125 and restore it and przktycznini all parts I buy from you because you have the most and prices affordable
Review translated automatically
Reliable opinion
Romet Ogar 200 1988. The bumper rubber fits perfectly in its place, fulfills its function 100%. It is made very solid and also looks good.
Review translated automatically
Reliable opinion
Fits perfectly, the material okey, a little shorter than the original, but it does not interfere with anything and everything works nicely. I recommend without hesitation.
Review translated automatically
Reliable opinion
Romet ogar 205 1989 year Bushing fit, installation went smoothly I recommend Problem with the play of the rear control arm solved Easy and quick replacement
Review translated automatically
Reliable opinion
Everything as in the original everything fits like a glove quality of materials very high. Fits both two mosquitoes
Review translated automatically
Reliable opinion
I own a 1985 Ogara 200 the rubber I used as a center foot rebounder fits perfectly. I recommend.
Review translated automatically
Reliable opinion
Everything according to the description. Very good workmanship. Everything fits perfectly. I recommend.
Review translated automatically
Reliable opinion
The polyamide bushings received are for du. The copies received do not even have the dimensions from the item description. The outer diameter is larger by about 1mm, the inner zas about 1.5mm. I also ordered a set of metal bushings that go into the polyamide bushing, and in the order I asked to check before shipping whether the bushings go into one another. Of course I was pounced upon. I already have 4pc of polyamide bushings from gmoto at home, none of them hold the dimensions from the description, 100zł psu in d. What is this Chinese millimeters are some bigger? I'll probably end up having to go to a turner and turn a metal bushing. If I had known I would have saved 100zł and time. Don't buy this
Review translated automatically
Reliable opinion
Terrible crap, one bushing is crooked, the naked eye can see that it does not hold the dimension. The second thing, the inner metal bushings are not bushings but tubes, you can see the boss from the weld!!! If I mount it about the soot on the axle, it will immediately dislodge the axle. I would send it back g. But somewhere I sowed the receipt. Do not buy, for this money any turner will make you better.
Review translated automatically
Reliable opinion
WSK 125 M6B3. On the original control arm axle, the bushing has noticeable play. Outer dimension as described ( but still to be rolled because the received polyamide bushing has a smaller dimension. Inner diameter too large 18.25mm. I wonder-but probably to the trash. The lathe will fit me the bushing to size.
Review translated automatically
Reliable opinion
Everything fits as it should, a little oil and sits elegantly, the material very good and above all hard, workmanship aesthetic , no burrs after machining. I buy on gmoto since June when I bought my wsk and so far I am satisfied.
Review translated automatically
Reliable opinion
shl m11 sleeves very good quality, the advantage is that the inner metal sleeve has a larger diameter, this provides greater stability /compared to the original version /, Precise dimensions, Installation without problems,
Review translated automatically
Reliable opinion
A small thing, but quite important. Especially when my romet received a new paint job. It fits flawlessly. In my case, it 100% replaced the previous item in the Ogar 2375 as well as fits the 200.I recommend.
Review translated automatically
Reliable opinion
I have a quad 110 kingway year 2000, The product I ordered is of very good quality it welded me nice while assembling. Perfect fit, Accurately made,. I highly recommend !
Review translated automatically
Reliable opinion
Quad atv200 so-called.chinol. bushings fit as if they were the original parts for this quad. Super case. Very well made and accurate. I highly recommend these bushings
Review translated automatically
Reliable opinion
Bushing is suitable for ATV 150 with GY6 engine, appearance Grizzly 2013, confidently recommend, less than a millimeter of clearance, looks like and performs really well
Review translated automatically
Reliable opinion
Barton Sprint 4t 50ccm already 110 xd bushings fit perfectly, now the rear wishbone holds nicely and there is no uncontrolled sideways movement. I recommend
Review translated automatically
Reliable opinion
We are satisfied with this product. The product well made and fits the motorcycle all well made. So we will be ordering even more.
Review translated automatically
Reliable opinion
My moped is GB Motors Street 50 2010 installation went without a problem, it was enough to lubricate the bushings well with grease and press them in.
Review translated automatically
Reliable opinion
I own a Quad Bashan 200, engine capacity is 200 cm3. The bushings I can 100% recommend are of very good quality fit perfectly !
Review translated automatically
Reliable opinion
The bushings were solid. They fit tightly into the control arm. Used for a few months and so far no damage.
Review translated automatically
Reliable opinion
I recommend this bushing because at the very sight they are strong and will last a long time rubber is strong I highly recommend .
Review translated automatically
Reliable opinion
Aesthetically made zero play on the axle, have a good rubber that lasts a long time recommend what to buy.
Review translated automatically
Reliable opinion