Returns up to 14 days
CAMSHAFT SET 551G GEAR-DRIVEN - 330-0100
£971.41 including VAT
551 Cam Kit
Manufacturer:
Manufacturer id:
330-0100
General description
- Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
- Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
- Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
- A hydraulic press and other professional-level tools are required to install these kits
- Cam bearings and gaskets must be replaced when installing new cams
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- Due to the inherent characteristics of gear drives, you may experience more valve train noise.
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9
- More power across the rpm range, with improved low and midrange torque
- Can be used with stock pushrods, springs and lifters
- Strongest from 1,000-4,000 rpm
- Made in the U.S.A.
