Transmission crankcase bushings

2024-09-26, 18:09

View original

Tomasz

Hi, I purchased a bushing for wsk 125 b3 73r if I remember the vintage correctly. As for the outside dimension is an improvement, while the length has to be adjusted by grinding it on paper cut to the engine. Because sometimes after turning the engine, the box stands oaky. It all depends on the state of wear of our engine. Mine I had to grind 0.5mm to make the box turn slightly. Bronze very hard and resistant to wear I recommend

Reliable opinion

2024-11-04, 17:28

View original

Kacper

Tragedy don't put this in your engines at my Jawa did about 10mth and started howling it turned out that the bushing had worn out all the way to the crankcase. Don't want to know what could have happened.

Reliable opinion

2024-10-28, 02:35

View original

Patryk

The sleeve is made of such material as stated in the description. The dimensions are consistent. The workmanship performed at a b.good level. Good price, recommend.

Reliable opinion

2024-11-08, 14:48

View original

Patryk

The bushing matches the dimension I ordered. It fits perfectly in the place made out by the old bushing. I recommend

Reliable opinion

2023-07-01, 08:55

View original

Bernard

The bushings should be bronze and they are brass, Bronze is hard to find. It would be better if the distribution is from a Polish manufacturer.

Reliable opinion