Motorcycle engine - parts
Romet Ogar 200

2018-06-18, 21:35

View original

Mateusz

The pin did not fit the piston you had to ream the piston to make the pin enter the package came to you with a broken ring I do not know if I will still buy anything from this store.

Reliable opinion

2020-09-02, 00:45

View original

Michał

Romet Komar 3 1975 engine Dezamet 023---Pin aesthetically packaged to the naked eye you can see that it is decent material-wise for new shafts as found.

Reliable opinion

2023-12-04, 11:57

View original

marcin

Hello, I recently ordered bearings for the engine Java 223 and I am pleasantly surprised, putting the bearings I had a slight problem but it was the fault of the crankcase because there was a light carbon deposits did not want to enter well, but after cleaning without any problems entered one of them even fell into the snow and continued to work xd, in general nicely packed boxes are useful for storing old parts I always order from gmoto because on other sites there is no such quality and nicely packed packages everything so far that I have ordered at gmoto works GREATLY RECOMMEND everything works

Reliable opinion

2024-06-15, 09:20

View original

Robert

As for the cylinder very good workmanship, it is made of the same material as the original , The head is also very good I have no reservations Piston also good but as for the rings I'm not 100% convinced but I could be wrong it will turn out with time, I can give feedback in a few weeks as to these rings. Regards.

Reliable opinion

2017-12-25, 15:54

View original

Paweł

Ogar 200 Piston in order does not swell, beautifully fitted.Unfortunately, they gave me 2 rings for jawa 50 and one for rometa(023).Still zabezpeczenie from the set flew like a Jew after uudtym store, but I bought at the exchange such as in the orginale and the ring which they did not send me.Yes, it is all OK.

Reliable opinion

2020-05-02, 10:22

View original

Rafał

The diameter of the pin mismatched (improper fit) with the bearing in the connecting rod head of the crankshaft, which I purchased in parallel with the pin hoping to match the two parts. I reordered the other pin hoping it would fit.

Reliable opinion

2016-09-30, 12:36

View original

Mateusz

Ogar 200 '85 The product is weak, the piston sucks because the moped won't even start. The cylinder is ok, the head too, although the latter could have a better thread cut and the ignition chamber ground.

Reliable opinion

2020-09-01, 00:35

View original

Piotr

I recommend piston piston AK 20 2 ring Almot nominal kpl 38mm 50cm3 fits the cylinder without any problem is very good quality everything packed very well fast delivery time Recommend !!!

Reliable opinion

2017-08-19, 14:16

View original

Mariusz

I own a bike jawka 50 I got it from my grandfather and with the help of gmoto store I can renovate it pozatym very wybka delivery allowed me to accelerate the renovation thank you very much

Reliable opinion

2018-10-31, 21:47

View original

Paweł

Ogar 200 1985.-A very good Polish piston.Nicely made rings, pin also bdb.After putting the piston on, the engine runs evenly, holds revs, has power and does not swell up

Reliable opinion

2017-04-24, 18:30

View original

Kacper

I recently ordered a clutch basket for the engine "jawka" 50.The basket presents itself very well. I do not see any defects. We will see how it will perform during use.

Reliable opinion

2017-03-21, 15:51

View original

Bartłomiej

Piston looks good but not driveable. The pin goes into the piston with play! If I shimmed the engine on this it would knock for goodness sake!

Reliable opinion

2018-01-07, 09:46

View original

Rafał

jawa 50 mustang unfortunately the head does not fit this model and makes complications with the piston so the fit of this is unfortunately poor ;/

Reliable opinion

2016-01-23, 20:54

View original

Mirosław

Jawa 50 type 20.Order processing exemplary, speed also. Products in good quality. SKF, it is known, is the top shelf bearings

Reliable opinion

2021-09-07, 08:22

View original

grzegorz

I ordered according to me a set of two bearings and received one I don't know if I misunderstood the offer but a set for a wheel is two bearings.

Reliable opinion

2017-12-16, 20:49

View original

Krystyna

Romet ogar type 200 super fitted piston and is solid I recommend this store gmoto pl really parts like from PRL-U

Reliable opinion

2016-10-30, 21:41

View original

Antoni

The pin is not the best fit, There is a large gap between the cylinder and the head, resulting in a lack of compression.

Reliable opinion

2018-08-18, 12:56

View original

Olo

Ogar 200 1987r 50cm3. The piston fits very well with the cylinder. Workmanship of the set I rate 10/10. heartily recommend.

Reliable opinion

2017-11-09, 08:29

View original

stanisław

Very good product, workmanship without any reservations, in the spring will be lapped, to all I recommend a good store.

Reliable opinion

2021-09-27, 22:41

View original

Sebastian

Jawa 50 duck 79r. High quality piston pin after heating the piston goes into place seamlessly

Reliable opinion

2015-12-08, 21:21

View original

Adam

The goods meet all the requirements.REALLY!!! RECOMMEND!!!FAST PROFESSIONAL CHEAP AS SHOPPING IS ONLY GMOTO.PL

Reliable opinion

2021-01-23, 09:41

View original

michał

Jawa 50 Mustang. Fast delivery, good quality goods, good materials, good value for money. Recommended.

Reliable opinion

2021-03-15, 21:54

View original

Jakub

Romet Komar 2351 year 78 bearing fits round engine S38 egg. Looks solid and well made.

Reliable opinion

2017-07-05, 14:37

View original

Barbara

The product as fine as possible good quality-price ratio fitting adequate workmanship good recommend.

Reliable opinion

2015-11-05, 07:31

View original

Adrian

Fast shipping well packaged goods. Very good information about the implementation of the order. Service 5/5

Reliable opinion

2024-10-19, 08:33

View original

Kacper

Durable hard seal that does not tear in the hands from the sheet can be cut dozens of pupils

Reliable opinion

2017-07-09, 23:16

View original

Andrzej

I bought a piston almot nominal kpl 38mm 50cm3 the pin enters loosely and the circlips fly in the groove

Reliable opinion

2024-05-04, 11:46

View original

Juliusz

Everything ok I recommend as much as possible I will definitely come back here quality good. Fast service.

Reliable opinion

2016-04-21, 15:08

View original

Adrian

Jawka 50 Mustang all ok, although a 2 ring piston is 100 times better

Reliable opinion

2019-10-20, 19:47

View original

Przemysław

Solid bearing. Fitted to SHL M11 engine S32. Everything fit.

Reliable opinion

2015-06-14, 13:24

View original

WOJCIECH

Badly packaged parts and thus arrived damaged rings.

Reliable opinion

2016-04-17, 11:42

View original

Nikodem

MZ ETZ 150 - The product is as described. Highly recommended.

Reliable opinion

2016-07-29, 13:33

View original

Łukasz

Jawa 50 Mustang, part well made, fits without any problem.

Reliable opinion

2015-06-02, 23:56

View original

Krzysztof

not yet installed but I have confidence in this manufacturer

Reliable opinion

2015-05-17, 09:27

View original

wieslaw

The product is very good I am satisfied with my purchase

Reliable opinion

2014-10-02, 16:43

View original

Bartłomiej

Super goods as expected shipping also ok also recommend.

Reliable opinion

2015-02-22, 08:20

View original

katarzyna

wszytsko wporzadku product as described.I recommend

Reliable opinion

2015-08-22, 11:01

View original

DARIUSZ

Everything 100% ok recommend the store fast shipping

Reliable opinion

2014-10-02, 18:32

View original

Damian25367

Very well made cylinder and piston :)

Reliable opinion

2017-02-28, 12:51

View original

DAMIAN

best bearings what to say 5/5

Reliable opinion