Motorcycle bodywork - parts
Yamaha YBR 125 SPD Custom 2012

2021-07-27, 10:01

View original

Mateusz

Handle bought for Yamaha YBR 125 2008.It looks very nice and elegant but is not a good replacement. The handle lacks a hole for the brake rebound spring, as a result, after installation, the handle does not rebound properly and the stop light often remains on after releasing the brake or lights up on its own. The photo shows a comparison of the original handle and the purchased replacement.

Review translated automatically

Reliable opinion

2021-05-25, 09:38

View original

Hubert

I own a Yamaha YBR 125 motorcycle, and the fender I purchased does not differ in appearance from the original. It fits perfectly. The motorcycle with this fender looks good. Installation did not cause me any difficulties and took me 15 minutes.

Review translated automatically

Reliable opinion

2018-11-02, 09:29

View original

Aleksander

WSK 125 75r | The frame fits in the org. holes in the rear lamp mount. I recommend, because this product is worth its price and it is practically indispensable in the mounting of the plate.

Review translated automatically

Reliable opinion

2020-04-28, 09:34

View original

Piotr

In this price range, there is nothing to complain about. The product will do its job. It should certainly survive more than one motorcycle trip.

Review translated automatically

Reliable opinion

2025-09-20, 16:41

View original

giannhs

Very nice your products and at a good price and in very good quality with very nice packaging and I am very happy

Review translated automatically

Reliable opinion

2022-03-09, 09:06

View original

Adrian

Unfortunately, the frame is made very poorly, due to carelessly cast material at the edge, the license plate does not fit and it is impossible to close the latches. It is better to spend a few zlotys more for a better quality product that will have the correct dimensions. Despite the not too bad aesthetics, I advise against the product, it does not serve its purpose.

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2023-07-15, 05:33

View original

Kamil

Frame very cool massive with a cool composing company logo unfortunately I did not use the purchased item because my board is smaller than I anticipated ? but the frame itself I highly recommend as I will measure the size of the board I will order another one like it

Review translated automatically

Reliable opinion

2024-01-11, 07:04

View original

Jacek

The element is made of good quality plastic, allows for repeated mounting and dismounting. The number and size of the mounting holes allows you to conveniently adjust the mounting of the element. Shape and aesthetics of workmanship at a really good level

Review translated automatically

Reliable opinion

2025-04-06, 06:28

View original

Rolf

The fender I ordered for my Yamaha YBR 125 was delivered quickly. It fits really well and was also easy to fit. The communication with the sales staff is really good and I can highly recommend the company.

Review translated automatically

Reliable opinion

2022-01-24, 07:32

View original

Bogusław

License plate frame very solidly and aesthetically made, the size of the plate perfectly matches the size of the license plate, the mounting holes of the frame even fit into any bracket that are found at the motorcycle.

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2019-05-17, 13:57

View original

Przemysław

Honda St 1300 126 hp 80k hp 2002r , I bought the motorcycle in the commission and there standard commission frame, a little diso-polo with such a ride that's why the frame with the inscription HONDA will perfectly match the new machine ;)

Review translated automatically

Reliable opinion

2024-09-21, 06:50

View original

Oriol

As shown in the description. Fits perfect. I just had to drill two holes in it to put a red reflector that carries the house epro no problem. It looks sturdy.

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2019-03-29, 10:25

View original

Roman

I have 2 old oilers reliable equipment frames fit like a glove I bought 2 pieces well fitted to the dimensions of the board simple to use good material highly recommend

Review translated automatically

Reliable opinion

2020-04-04, 11:14

View original

Adam

Romet scmb 125, I bought a frame for the reg plate.Appearance , size, quality, price - very good. I recommend! Delivery prompt and well packaged.

Review translated automatically

Reliable opinion

2024-03-13, 08:43

View original

Piotr

What to write. A lot of screw cutouts to fit and screw centrally in each vehicle. Also in a Chinese electric. Fits like a glove.

Review translated automatically

Reliable opinion

2025-06-27, 06:41

View original

Růžena

Easy to assemble, intuitive, no problems. I assembled the drive myself without any instructions. My speedometer finally works again. I recommend it.

Review translated automatically

Reliable opinion

2021-11-11, 16:39

View original

Paweł

Benelli TNT 125 quick and easy installation for everyone. Shipment ordered for parcel machine shipped quickly. I recommend this product to everyone as well as the store.

Review translated automatically

Reliable opinion

2024-10-19, 10:34

View original

Radim

Excellent quality of the whole product , fully replaces the original from Yamaha. Fast delivery and excellent price. Bought as a spare part for traveling.

Review translated automatically

Reliable opinion

2025-09-18, 10:04

View original

ΔΗΜΗΤΡΗΣ

It has nickel finish but its plastic, the article says metallic but thats wrong, if you want it for enduro bike or adv its not metallic

Review translated automatically

Reliable opinion

2022-01-31, 08:22

View original

Wojciech

This is not the first time I have ordered from Gmoto yet I have not been disappointed shipment always fast on time products also as described I recommend

Review translated automatically

Reliable opinion

2024-06-06, 11:24

View original

Łukasz

Very good quality fairing, clear instructions and hassle-free installation. I recommend, I will definitely pay attention to other accessories of this brand.

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2025-07-22, 14:38

View original

Jiri Novak

Plexi's gonna be fine. Included in the shipment are several washers, reducers and replacement screws and adhesive stops. Very good quality. Satisfaction.

Review translated automatically

Reliable opinion

2023-08-14, 15:03

View original

Janek

I have not yet assembled and do not know how with the fragility of the plastic, but from the outside it looks positive. On the back a slight unpainting.

Review translated automatically

Reliable opinion

2020-12-28, 09:34

View original

Tomasz

The locking element of the plate falls out, so I screwed it on. Once I had a similar patent and lost the plate, then I did not screw.

Review translated automatically

Reliable opinion

2022-04-11, 15:01

View original

Konrad

Very good workmanship, prompt delivery. Implementation in accordance with the order. Product definitely worth recommending.

Review translated automatically

Reliable opinion

2025-07-23, 05:10

View original

ΔΗΜΗΤΡΙΟΣ

It added a nice feeling to my bike.Something like a nice touch.Since the whole bike is red it suited it very well.

Review translated automatically

Reliable opinion

2020-05-25, 21:10

View original

Paweł

The frame mounted on the motorcycle and from today it pleases the eye, I did not want to drill the boards and with the product I am satisfied.

Review translated automatically

Reliable opinion

2020-08-24, 18:28

View original

Arkadiusz

It's a pity that in the feedback there is no option of feedback to deliver, here you should be rated three, the rest as in the best order

Review translated automatically

Reliable opinion

2024-05-03, 06:48

View original

Michał

Everything in the best possible order. Frame made of good quality plastic, sheet metal fits it and holds well.

Review translated automatically

Reliable opinion

2021-02-02, 18:03

View original

Piotrwien

Instant shipping products as described very good contact with the seller. I recommend with a clear conscience.

Review translated automatically

Reliable opinion

2023-06-11, 09:16

View original

Robert

Service stickers look good just in time to stick on the old cardboard box. Highly recommended to those interested.

Review translated automatically

Reliable opinion

2022-03-14, 12:03

View original

Wojciech

Fast delivery, excellent contact with service, very good workmanship, fits perfectly , highly recommend,

Review translated automatically

Reliable opinion

2022-05-28, 13:11

View original

Ksawery

Chrysler Voyager 2.5 TD, 1998. The sticker is a much better solution than the tag, it is impossible to lose it.

Review translated automatically

Reliable opinion

2024-02-01, 08:58

View original

Iwona

An indispensable tool for any motorcyclist or workshop to properly take care of the chain in his motocycle.

Review translated automatically

Reliable opinion