Forgot password
Order status
Free delivery from euro
Motorcycle electrical & lighting - Page 64
Options +2 
Browse Motorcycle electrical & lighting - Page 64 by manufacturer
Products reviews
Motorcycle WSK 125 B3 year 1985 is under restoration. It buys most of the parts at Gmoto pl I am satisfied. Previously I renovated WSK 125 B1 also most of the parts I ordered from Gmoto pl. There were never any problems. I still have plans to renovate WSK kos and WSK Bąk and wfm The parts are of very good quality and always fit the bridge I have not yet installed but I watched it is solid.
Review translated automatically
Reliable opinion
The holder solidly made thick plates with a special slide-out. The holder for p21/5w bulb touches both plates on the sides and style and the bulb shines on 2 filaments. The quality is very good, you can feel that it is not the cheapest holder, but well made and fitted to the lamp. I sincerely recommend and Greetings Marcel Blacharski
Review translated automatically
Reliable opinion
I own a jawa 50 ogar 200 moped.I purchased an ignition coil for this model and am very pleased with the product. Well made, safely packaged and, of course, efficient. After installation the jawka fired up and I can still enjoy the ride. I highly recommend the product and gmoto.pl store for their professional service and low parts prices.
Review translated automatically
Reliable opinion
Romet komar 2350 - unfortunately the workmanship is terrible, the ignition fell apart during assembly, gmoto company felt responsible and refunded part of the money. I had to assemble the ignition from old parts. I asked for attention to the quality of the parts.
Review translated automatically
Reliable opinion
The purchased headlight glass is of the highest quality, without any blemishes, in short the original . Exemplary workmanship, finish safe for the user. Dimensions in accordance with the description. As you can see from the photos wide application.
Review translated automatically
Reliable opinion
The spark gap came in perfect condition with no complaints, it performs its function and gives a very good spark and I hope that with this quality of the product will last as long as possible
Review translated automatically
Reliable opinion
Everything works as it should after fitting this spark plug the scooter started to fire up nicely and ride the performance is also not bad I can recommend it as much as possible ;)
Review translated automatically
Reliable opinion
Coil mega!!! And the spark so strong it knocks down the horse !!! Shipping mega fast even did not expect I really recommend this site to everyone !!!
Review translated automatically
Reliable opinion
I have a moped dafier yankee 50cm product very well made and the starter relay works 100 percent in the moped
Review translated automatically
Reliable opinion
Bemdix starter gy6 4t very good quality materials with attention to detail fits without any problem recommend to everyone
Review translated automatically
Reliable opinion
Fuel level sensor tank float very well made with attention to detail fits without a problem recommend to all
Review translated automatically
Reliable opinion
a very neat kit, which fitted the motorcycle perfectly, and the whole kit was very well packed.
Review translated automatically
Reliable opinion
I put the coil on the MZ 250.2 ES TROPHY, late last autumn, so that the motorcycle, practically was already in "winter sleep". When I started riding with the new coil in March this year, unpleasant events began to happen, as the motorcycle had difficulty firing up, and while riding, unexpectedly stopped working. After a while, it was again somehow possible to start the engine, but the ride was uneventful, and I finally put the motor in the garage to determine the cause of the problems. Somewhat accidentally, I brought my hand close to the area of the coil when the motorcycle briefly fired up, and I nearly fell to the ground due to an electric shock, which instead of the spark in the spark plug, accumulated on my person. I don't know if this new coil had a puncture from the beginning, but it certainly does now. So, after using it for a short time, I know that this coil, is not suitable for operation. It brought me a lot of worry, because I did not suspect that a new product, could be so unreliable. Refers to the purchase of November 2018 - order 497413
Review translated automatically
Reliable opinion
Hello I would like to rate your page gmoto very highly and by that it is really great always when we something goes off on my quad 125ccm so I always turn to your page you are a bargain quality at super prices. I have already ordered a lot of parts it is very good that it always takes up to 3 working days to ship I have already ordered the drift. Starter relay Starter Spark plugs Starting voltage coil Gasoline filters Brake pads Oil to change and a few other things there's a lot of stuff Since then, it starts beautifully in 2-3 seconds thanks to your offers of what you buy Great site gmoto keep it up. I like úvas buy That discount from you would be nice for us. I still want to odvás to buy ALU wheels. Elektroni thank you for your understanding. Have a nice day
Review translated automatically
Reliable opinion
Romet Kadet, the interrupter looks good at first glance, however, you need to work on it so that there are no problems with it. First of all, tighten the locking plate on the side and strike the rivet which holds the part isolated from the base in one place (in my case it worked on this rivet and caused short circuits). The second thing is to bend the spring from the toothbrush like the original so that it does not go into the holes, but falls into a certain place locking on them (U-bend where it enters the hole). Adjust the curvature of the anvil to the toothbrush by appropriate bending (in my case it went that oblique). And the last thing is to throw away those plastic insulating washers and buy thin ones made of rezotex or ebonite ) to match the height of these washers to the anvil.
Review translated automatically
Reliable opinion
The starter came in new, unused condition. It is in working order, there are no problems with it. The quality of workmanship is identical to the OEM. I fully recommend the product the more so that it costs 45zl. I bought my copy for scooter Romet 717 (Old model) 4T (4 - stroke engine). It fits perfectly. After removing the broken part, I installed the purchased item without any problems. An additional plus is that along with the starter in the kit was a cable (visible in the photo) connecting the ignition coil, which is a nice touch, because in some stores it is not included in the kit.
Review translated automatically
Reliable opinion
Really good starter, works great on my gy 6 scooter. The product is just like the original, it's really affordable and good quality for the price. I am very happy with my purchase and have had a good experience with this place, I will continue to use this place in the future. At least you get what you order, although it takes a little longer to post than another place but that's probably down to my location, I still order from here even though the postage is more but the products are cheaper and maybe better.
Review translated automatically
Reliable opinion
Barton volcano 50 with the installation there was no problem I recommend only to add that in my model I would have a problem because the plugs were different in barton I had a square and the module half round so you can call it but it is easy to convert the plug in the electrical system you can go buy a new one or pull the pins and put them in without or just so you grind the plug to enter it and hold it I do not know maybe it is my fault or maybe a factory defect I do not know if it was my fault or maybe it was a factory defect, but after 3 days the module stopped giving a spark but fortunately gmoto company has a very nice staff and it is possible to come to an agreement :) .
Review translated automatically
Reliable opinion
As for the performance of the module, I have no reservations, the most important thing is that it works and does not burn out and fits. The bike revs faster, which results in the fact that when starting from a standstill it has become lighter, it does not wonder after turning off the gas whether to go or wait a while. Only you have to be careful when plugging in if you had the original module with the cable on top. When connecting, you need to remove the black cable (+) from the cube after the ignition, otherwise it causes a short circuit and blows the main fuse.
Review translated automatically
Reliable opinion
Part I own a QUEST Q9 scooter and decided to stiunning it a bit to start with I removed all the locks and now I bought a C.D.I module when it arrived it was so well packaged it would survive any fall. After unpacking and putting it on, the scooter cranked to higher revs, and well the module itself looks cool, overall good quality and great fit. In the future I also plan to purchase from Gmoto.pl a larger cylinder and variator. I heartily recommend. :)
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
The interrupter has a German TUV certificate, this is always a guarantee of quality. After installation and ignition alignment, it works as Predom Romet factory ordered. During installation I had a problem with the pin on which the interrupter is seated (I detected a small play, meanwhile it should not be there, the pin should be mounted at a right angle of 90 degrees, a little tinkering threading and the problem eliminated). Romet Ogar 205, year of manufacture 1987.
Review translated automatically
Reliable opinion
I own a romet rxl 50 2t scooter I ordered a fuel level sensor , the sensor fit perfectly without checking I installed although with the installation is a bit of fun you have to tilt the tank and remove the seat lock and put it in, and efek fantastic works without any problems, the product very cheap although on other sites I saw more expensive, but that is not a fan of expensive purchases I chose gmoto and once again I am satisfied.
Review translated automatically
Reliable opinion
Romet Kadet , the capacitor fits in place of the old one without reservation, the installation went without a problem. Wire minimally shorter than the original about 3mm, but reaches the same with the same arrangement in the spark gap. Remember during installation to soak the felt in oil and properly bend it to adhere to the magnet cam (if you install without bending it will not lubricate).
Review translated automatically
Reliable opinion
I own a 1976 wsk 125 I had a selenium rectifier earlier unfortunately there were problems with charging the battery after installing this bridge charging is as it should be of course the bridge is easy to install the quality of workmanship very good cables and connectors solidly mounted everything nicely described I recommend to all who have charging problems.
Review translated automatically
Reliable opinion
Romet Ogar 205 from 1990.I received this smaller capacitor with a length of 22 mm , it has a shorter wire and there was a problem with connecting it to the coil.After talking to the store staff I was immediately sent the longer capacitor -27 mm without any additional cost.This capacitor has a wire 5 mm longer and fits perfectly to the above type of Romet. I recommend this store.
Review translated automatically
Reliable opinion
Module very cool, changed the life of my scooter for new! When buying, I ask users to pay attention to the clip that is sometimes on the right and sometimes on the left at the scooter or it is not there as in my case. This, the clip can make it difficult for us to mount the module to the scooter, it is good that at the module it is not there because you can fit it on the right as well as on the left.
Review translated automatically
Reliable opinion
A capacitor is an important component in an electrical system. It is really worth replacing from time to time preventively. Fits into a rometa ogar 205, a little work to put on (pulling off the cover, magneto, etc.), but there were no problems with fitting into the spark gap. After installation, the whole installation works well. Romet Ogar 205, year of manufacture 1987
Review translated automatically
Reliable opinion
WSK 175 coil gives spark but the engine did not run properly. I put it in another motorcycle and the same thing, the engine only ran at idle and when I added gas it did not go into higher revs. After installing a used PRL coil, the moto runs without problems. Be careful, a new part and there is no assurance that the engine will work properly.
Review translated automatically
Reliable opinion
MOTOBI ROCKY 50 year 2008 parts you can see that solidly made nowhere are broken all plastic parts are okey. Spark plug very solidly packed and well protected against damage. The parts are very aesthetically packaged and the appearance is also aesthetically pleasing. I had no problem with the assembly RECOMMEND.
Review translated automatically
Reliable opinion
hello,I am very satisfied with the module purchased from your company ie.GMOTO.pl the operation of the engine has improved,previously it was very sludgy,especially when starting on small hills,now the engine has what it was missing.The module has met my expectations.Do not combine with the removal of locks this module is enough.
Review translated automatically
Reliable opinion
The picture shows an old and original product that broke, I ordered a solenoid from here for a really cheap price (I was surprised myself), it is pretty much the same as the original one, works and flowers well. Thank you very much. And to all good future driving until summer 2025. And long miles with gmoto products, heh
Review translated automatically
Reliable opinion
Inca street 2t 50 . After purchase stator fits very well scooter fires up . Fitting to the model of scooter very good , aesthetically also very good but one small problem is the base of dur aluminum which is fragile. However, you can not hold a grudge against the store . goods most importantly consistent with the description .
Review translated automatically
Reliable opinion
The module is of good quality. The fact that Chinese and for Chinese scooters, but by the casing and plug you can see that it is not shoddy. For such money I recommend it. In appearance it is a bit poor. The downside is that they do not add rubber mounts to it in my old module this rubber had already broken and I had no way to fix it
Review translated automatically
Reliable opinion
The lamp performed very correctly as a faithful copy of the original. It lies on the fender at a satisfactory level, admittedly with a slight gap between, but personally it does not bother me. I used a total of only the base of the lamp and with the original shade it blends practically perfectly. I heartily recommend it!
Review translated automatically
Reliable opinion
I currently have a Toros f16 scooter.One day my turn signals did not work so I ordered a turn signal interrupter because the previous one burned out installation was quick and easy.And then I bought a gas switch because the previous one did not suck in the fuel I bought the product was as described I am very pleased.
Review translated automatically
Reliable opinion
I RECOMMEND THAT YOU DO NOT HESITATE TO CONTACT ME ON THE OLD CEFCE THERE WAS A WEAK SPARK AND WE WERE LOOKING FOR THE CAUSE NOW AFTER REPLACING IT WITH THIS ONE THERE IS A VERY VISIBLE AND STRONG STABLE SPARK I RECOMMEND THAT IN MY CASE THE PROBLEMS WITH THE SPARK DISAPPEARED DURING REPAIRS WITH THE ELECTRICIAN EVERYONE SHOULD CHANGE IT FOR PEACE OF MIND AND CORRECT SPARK
Review translated automatically
Reliable opinion
Fits perfectly and thanks for fast shipping . Thank you again . you are a top team . I found these tank sensors via Google and they work 100 percent. I have saved your store and if I need anything else I will order from you again. Greetings from Cologne
Review translated automatically
Reliable opinion
Bendix starter GY6 4T-element failure-free, I have had the opportunity to install this element more than once in several already scooters and the operation has always been satisfactory.The assembly is made precisely and with good materials.Even after a long time of use does not show any problems.
Review translated automatically
Reliable opinion
WSK 125. stator fits, which can not be said about the made CDI ignition for this motorcycle. Due to this very workmanship, I had to additionally buy a new stator, as the one there was damaged by the magneto working too closely. In addition, I had to improve the stator base.
Review translated automatically
Reliable opinion