Forgot password
Order status
Free delivery from euro
Motorcycle electrical & lighting
WSK 175
Options +2 
Browse by manufacturer
Products reviews
Motorcycle WSK 125 B3 year 1985 is under restoration. It buys most of the parts at Gmoto pl I am satisfied. Previously I renovated WSK 125 B1 also most of the parts I ordered from Gmoto pl. There were never any problems. I still have plans to renovate WSK kos and WSK Bąk and wfm The parts are of very good quality and always fit the bridge I have not yet installed but I watched it is solid.
Review translated automatically
Reliable opinion
I bought this reflector for myself for a 2007 Yamaha Drag Star 650. I had a similar one before on my Intruder, so I decided to glue it here as well, not only for safety but also for beauty. I glued it on the rear of the passenger backrest. Made really precisely with convenient self-adhesive tape. The whole job two minutes, looks great, as if it was always there! Greetings Maciek
Review translated automatically
Reliable opinion
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. This cover is nice because it is made of solid material, it was quite difficult for me to doggone hooks and a little to profile to the shape of the age-old lamp, but this is normal if it combines old after the transitions with new. In the end it fits and sometimes it rains, blows, dusts and the ignition is well shielded and still works. I recommend
Review translated automatically
Reliable opinion
Romet Ogar 125 (vintage 2015). Admittedly, the lamp shade is from a different model, but I managed to fit and install it quite accurately, which allowed me to regain the joy of riding :) The failure, was that the previous lampshade was broken, so the installation consisted of drilling through the existing underside of the lamp to run two mounting screws through.
Review translated automatically
Reliable opinion
I own a jawa 50 ogar 200 moped.I purchased an ignition coil for this model and am very pleased with the product. Well made, safely packaged and, of course, efficient. After installation the jawka fired up and I can still enjoy the ride. I highly recommend the product and gmoto.pl store for their professional service and low parts prices.
Review translated automatically
Reliable opinion
The front lamp insert from Wesem, it looks very nice, there is nothing to complain about as far as the insert is concerned, while as for the tail lamp, it is aesthetically made, but there is no possibility of connecting a stop light, and it is a pity that there is no reflector as in the original, only a piece of sheet metal. Awiny bulbs without approval.
Review translated automatically
Reliable opinion
WSK 1969 year b1, so called two frame. The glass fits super well. I had concerns about whether it would sometimes sweep too much space in my lamp (I've had that happen before) but it's all as it should be. It works nicely, gives good light, bulb mounting also without problems. The look is also reminiscent of products from that era. I recommend and greetings
Review translated automatically
Reliable opinion
hello front lamp insert as well as the frame fit very well but the rear lamp is some kind of Chinese thing the spacing of the screws does not match and in general far from the original on the photo no1 original on the right rear lamp from g-moto.ps please take care of the details and relying on the originals we are restoring old motorcycles not Chinese vacuum cleaners :)
Review translated automatically
Reliable opinion
WSK M06 B1 1970. Coating very good and so many pluses. Requires a lot of work to fit the serrations to the holes in the lamp. In addition, the thickness of the sheet metal makes it difficult. Also, do not overdo it with the thickness of the rubber under the cover, because you will not have enough serrations to fix it.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. The front lamp insert of very good quality, perfectly matched. As for the tail lamp, its workmanship is also very good. The only thing to complain about is the lack of possibility to connect the stop.
Review translated automatically
Reliable opinion
The bulb has the specifications as shown in the description,fits under the BA9S socket,It looks like a good quality product,but it remains to be seen,I attach a photo that may help someone in choosing the right bulb.
Review translated automatically
Reliable opinion
WSK of 1969, the so-called two-frame, fits shines, light bright good, installation simple everything fits. The same bulbs apply to SHL from 1966 and 1967. All of them so far serve their purpose
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
Reliable opinion
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
Reliable opinion
WSK 175 KOBUZ The harness is made of very good quality wires with very well made and insulated ends after initial application to the original they look promisingly similar I highly recommend it
Review translated automatically
Reliable opinion
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
Review translated automatically
Reliable opinion
WSK 125 B3 1983. Visually very good. Also chrome very aesthetically pleasing and durable. Matching to the original as well as currently manufactured optical element perfect.
Review translated automatically
Reliable opinion
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. The holes fit, the sheet metal fits, everything is fine. A little uneven surface, but the plate is not visible after installation anyway :)
Review translated automatically
Reliable opinion
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
Reliable opinion
Yamasaki YM50-8 4T year 2010 installation of reflectors went very quickly not a whole minute it is difficult to get such reflectors with M6 thread.
Review translated automatically
Reliable opinion
Headlight spring fits Simson sr 50 easy installation nothing moves or falls out quality of material is very good .
Review translated automatically
Reliable opinion
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
Reliable opinion
6V 2W light bulb. Bought them for my KE125. Fitted exactly as per description. Very good light and overall quality.
Review translated automatically
Reliable opinion
The light springs were a perfect fit for attaching a light insert to the headlight bezel on my Moto Guzzi V50III.
Review translated automatically
Reliable opinion
Very good quality workmanship, fits my WSK 125 perfectly. The chrome on the frame is of very good quality.
Review translated automatically
Reliable opinion
I bought the battery for an electric Jeep for my son. It charges quickly and lasts a long time. Definitely recommend.
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
Reliable opinion
I do not recommend wole buy used. In the picture the black plastic is rubber. Lamp for one bulb. Trash.
Review translated automatically
Reliable opinion
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
Reliable opinion
I put the coil on the MZ 250.2 ES TROPHY, late last autumn, so that the motorcycle, practically was already in "winter sleep". When I started riding with the new coil in March this year, unpleasant events began to happen, as the motorcycle had difficulty firing up, and while riding, unexpectedly stopped working. After a while, it was again somehow possible to start the engine, but the ride was uneventful, and I finally put the motor in the garage to determine the cause of the problems. Somewhat accidentally, I brought my hand close to the area of the coil when the motorcycle briefly fired up, and I nearly fell to the ground due to an electric shock, which instead of the spark in the spark plug, accumulated on my person. I don't know if this new coil had a puncture from the beginning, but it certainly does now. So, after using it for a short time, I know that this coil, is not suitable for operation. It brought me a lot of worry, because I did not suspect that a new product, could be so unreliable. Refers to the purchase of November 2018 - order 497413
Review translated automatically
Reliable opinion
I have purchased an ignition cover for my Wska 125 M06 B3 and so briefly and to the point: - visually it looks very good, although the quality of the plastic slider could be better while the chrome is first class - fit the cover with the holes in the lamp after a small correction with pliers, and here it should be noted that the overlapping of the plates requires more strength and technique because it is a hard material, but it is better to take a little trouble than to complain that it is plasticine.isn't it? - I like the aesthetics, there are no unnecessary parts of the casting and for the money I think it is worth buying. Regards K.
Review translated automatically
Reliable opinion
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
WSK 125 1985. I chose an electronic interrupter because the traditional one with a resistance wire used so far sometimes jammed while driving under the influence of vibrations - the indicators lit up with a continuous light. Now the problem has disappeared. Only its interruption frequency is a tad too high, but this is probably because it is designed for LEDs and I have ordinary two bulbs of 21watts per side. I recommend
Review translated automatically
Reliable opinion
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
Review translated automatically
Reliable opinion
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
Reliable opinion