Motorcycle front brake-lines - Page 25

2017-07-29, 22:34

View original

Piotr

DL 1000 2007. With rudder upgrade. The wires arrived in a very decent time. During installation, shortcomings came out, which I would have preferred not to have. Well, the color from the tips is very impermanent, already after installation you can see scratches. Worse, however, is that the length of the cable is selected, it seems according to the principle of "saving on material, is the basis". In my copy, I have "risers" mounted at the steering wheel, so a little excess in the length of the cable, would be very useful. This was the case with the original, the length of which was sufficient when mounting the steering wheel elevation. Here with braided cables this length is clearly missing. It is very difficult to correctly locate the cable so as to avoid substitutions and clipping when turning the rudder in everyday driving. When the rudder has risers installed, the cables cannot be placed in the course intended by the manufacturer. Also, the angles of tightening the eyelets relative to each other could be improved, you can clearly see this when the length of the cable is "on contact" or below that. Mounted, I will test "around the chimney". Greetings

Review translated automatically

Reliable opinion

2015-04-08, 18:46

View original

Grzegorz

The attached screw did not fit the original thread in the master cylinder. All the rest professionally done Highly recommend!!!

Review translated automatically

Reliable opinion

2016-09-09, 15:15

View original

Radosław

Suzuki GSXR 1000 K5 Very good workmanship, they look beautiful and perform even better! I recommend :)

Review translated automatically

Reliable opinion