Motorcycle parts
Honda CR 80 - Page 14

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2018-11-01, 20:28

View original

Krzysztof

Honda Africa XRV 750 - 1999. I bought 12 pieces. This mounting rubber is found in several places on the motorcycle(the mount of the skull rack, oil cooler, plastic handles, etc.). It looks like the original, the rubber is flexible, you can bend it with two fingers with a stronger squeeze and it looks solid. Only the course of time can verify whether it is as solid. Dimensions: Hole diameter(nominal): 10mm Width of the entire rubber: 22mm Groove depth: 8mm

Review translated automatically

Reliable opinion

2020-09-26, 09:52

View original

Jacek

I have a 2003 Honda XR 125 L. I was replacing the clutch now for the second time, the discs worked fine, they really lasted with me for about 10,000km. Now I installed them for the second time and everything went without the slightest problem. (Psst. Make sure that for your motorcycle you don't need any specialized key in the motorcycle manual and check how many discs are needed for your motorcycle, in my honda - 5)

Review translated automatically

Reliable opinion

2020-09-26, 10:01

View original

Jacek

I have a 2003 Honda XR 125 L. I am replacing the clutch for the second time (after 10,000km) with hard off-road and city riding. Metal discs passed the test that's why I buy them for the second time. Installation without a problem, but remember the specialized keys for your motorcycle, and the clutch cover gasket.

Review translated automatically

Reliable opinion

2018-08-21, 16:25

View original

Jakub

Honda CX 500 version CUSTOM year 1983 oil seals in perfect size. The dust seals sit tight on the shins and do their job in preventing dirt from getting in. Quality of materials very good, there was no problem with installation.

Review translated automatically

Reliable opinion

2020-03-22, 00:28

View original

Piotr

I was looking for a replacement for a 1998 Triumph Thunderbird 900, everything fits like a glove, installation without the slightest problems, service in the store as usual without reservation.

Review translated automatically

Reliable opinion

2022-07-07, 06:20

View original

Wiesław

Honda CB400N 1982.Workmanship of the seals very good. Installation without any problems. After driving about 400 km. after installation no leaks of any kind. I recommend

Review translated automatically

Reliable opinion

2022-01-21, 17:02

View original

norbert

Derbi senda SM Extreme 2018r. The candle did its job is very well made, I confidently recommend it!

Review translated automatically

Reliable opinion

2020-04-20, 11:27

View original

Adrian

Hi Honda Cbr 250r 2011 year The seals fit perfectly . Workmanship is very good , they look really decent despite the fact that they cost half as much as the competition. When applying to the shaft also no problems and damage (which often happens with poor quality product). After mounting they perform their function very well. I recommend and greetings

Review translated automatically

Reliable opinion

2020-09-27, 07:06

View original

Adrian

Hello I would like to share with you my opinion of this product, I own a 2011 Aprilia sx 125 motorcycle. Version 2t with engine rotax'a 122 anyone who has a dilemma whether to buy ordinary candles or iridium I recommend just iridium, as the manufacturer promises so happens, performance improves, it is more vital, so these are not empty words.

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2023-06-30, 12:53

View original

Krystian

Japanese-made product, well packaged by the manufacturer, provides safety for the porcelain part of the candle. "Head" of the candle straight, massive there is no chance for it to bend. The candle screws perfectly. It keeps the engine at a constant speed. The product itself fits most motorcycles, it is easy to install.

Review translated automatically

Reliable opinion

2019-10-18, 08:20

View original

Tycjan

Bmw R 1100 RT 2000 year, I purchased a set of consumables. Very friendly, professional service and advice. Competitive prices. They respond to emails. You are kept informed about the shipping status. This was my 3rd contact with the company. I recommend, I will certainly use again more than once. Regards, Tycjan

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2020-06-07, 11:07

View original

Piotr

Good day, I own a Suzuki RM 125 and from the beginning I had problems with candles. Recommended cheaper replacements did not cope. Only replacing the candle with an iridium one solved the problem. Finally I stopped having problems with firing up, I recommend 100%!

Review translated automatically

Reliable opinion

2016-04-14, 08:25

View original

Andrzej

Honda XL125 Varadero. After replacement, the play in the suspension of the rocker arm was erased and the comfort of the ride increased. The part fit very well and very good quality. The store works accurately, very good contact, good prices-I recommend.

Review translated automatically

Reliable opinion

2019-03-23, 08:51

View original

Monika

WITAM a few days ago I bought NGK candles, I am very satisfied with the quality and the spark is such that until. I recommend this candle at me sits in DT 125, previously I had BOSCH candles it hides at NGK Do not hesitate to order!!!!

Review translated automatically

Reliable opinion

2021-08-24, 09:31

View original

Sebastian

Sealers bought for Junak 123 (2015). The size identical appears on the original ones I changed. They fit perfectly and do their job (driven 1 kkm after replacement; I poured 150 ml of 10W lag oil into each lag).

Review translated automatically

Reliable opinion

2024-07-30, 14:11

View original

Jakub

I previously owned a regular spark plug and bought an iridium one, the difference is colossal, the engine does not start, it is more sensitive to the accelerator, better acceleration, I recommend the product, it is worth paying extra for this spark plug.

Review translated automatically

Reliable opinion

2023-06-24, 16:50

View original

Kacper

The candle runs super on the Derbi Senda 50 D50B0. It burns from the "shot" burns fuel as it should despite the fact that it has already done 1500km. The quality is super and the price is right too. Of course, there is nowhere cheaper to get this plug so only gmoto.

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2023-05-29, 09:11

View original

Bartosz

Candle very good quality long life unfortunately the product does not agree with the picture, because I received a candle where it is not unscrewed this reduction for another pipe but this is rather the fault of the store.

Review translated automatically

Reliable opinion

2017-04-28, 08:25

View original

Karolina

I bought these jaws for my Honda XR125 . It met my expectations, the description is in line with the facts. Fast hassle-free shipping, in a word-elegant. There is nothing to complain about! :)

Review translated automatically

Reliable opinion

2019-04-12, 07:04

View original

Rafal

I own a motorcycle Daelim Daystar vl 125 prod. year 2006 . Lag seals from ATHENA was a successful purchase because they eliminated leakage from the shock absorbers. Easy and quick installation.P olecam.

Review translated automatically

Reliable opinion

2017-10-13, 18:24

View original

Wojciech

honda vf 500 magna,goods in line with my expectations, seals fit perfectly, no residual rubber, etc as happens with other zimer, plus for the solid plastic packaging

Review translated automatically

Reliable opinion

2020-03-30, 20:44

View original

Michał

The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.

Review translated automatically

Reliable opinion

2023-09-11, 20:14

View original

sara

This mounting rubber is a great replacement for the rubbers found on the Honda CBR 600, but they are slightly smaller than the original (I personally didn't mind the installation)

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2020-08-08, 13:12

View original

Rajmund

The motorcycle is a honda transalp 600 1996r.The element fit perfectly without any reservations thanks to good workmanship and fit the repair went quickly and efficiently.Regards

Review translated automatically

Reliable opinion

2019-08-10, 14:02

View original

Wojciech

Yamaha tdr 125 2000r. This good quality candle also has good quality materials and very good life but not better than iridium candle

Review translated automatically

Reliable opinion

2018-03-11, 19:12

View original

Kamil

Great quality and price and on top of that professional service. Great packaged product and very fast shipping. RECOMMEND!!! Starts on a big frost.

Review translated automatically

Reliable opinion

2021-07-16, 16:43

View original

Dominik

The plug is perfect for the AM6 engine. After replacing the plug with a new one my moto came to life, now it smokes without any problem on the shot. You can see the high quality of the product, I recommend. :)

Review translated automatically

Reliable opinion

2021-10-18, 06:58

View original

Michał

Yamaha TDR 125. fast delivery, goods as described. Everything fits and works. We'll see how it will be with service life and resistance to harsh conditions.

Review translated automatically

Reliable opinion

2020-02-19, 18:44

View original

Dariusz

Sealers made of very good material are also very tight and flexible which makes it easy to install when replacing old sealers . I recommend

Review translated automatically

Reliable opinion

2024-05-03, 08:21

View original

Magda

Sealers fit varadero 125 2002, workmanship ok, trouble-free installation. So far the suspension works ok, we'll see how long they last.

Review translated automatically

Reliable opinion

2023-06-26, 15:34

View original

Przemysław

Professional approach to the customer, assistance at every stage and reliable. Express service, quality at the highest level, great and close-knit team.

Review translated automatically

Reliable opinion

2020-01-31, 10:05

View original

Kacper

Candle of good material fits dt 125 I am very satisfied with this candle because it has not yet failed me for most of the time I recommend.

Review translated automatically

Reliable opinion

2023-05-31, 06:57

View original

Sylwester

I highly recommend these iridium plugs it is very durable and the motorcycle thanks to it has more power and collects better I recommend this plug for your 2T.

Review translated automatically

Reliable opinion

2022-04-24, 13:31

View original

Krystian

Motorcycle enduro Beta RR 50 delivery went smoothly Sealers easy to install and despite riding on heavy terrain do not let go I recommend highly.

Review translated automatically

Reliable opinion