Forgot password
Order status
Free delivery from euro
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
Honda Africa Twin XRV 750 1999. The piston fits the calipers on older models, the pistons for my motorcycle are 3mm shorter. I ordered the set with the idea of shortening it. The material turned out to be soft compared to the original(this does not prove its strength, therefore the rating of 3 from the quality), cutting 3mm on the lathe did not overheat the pad and after protecting it on the turning side with an appropriate specific will ensure that it will not lose its anti-corrosion properties. A perfect replacement for the twice more expensive original. The width agrees, the quality of the seals seems to be OK, after installation it does its job - I recommend.
Review translated automatically
Reliable opinion
Honda Africa XRV 750 - 1999. I bought 12 pieces. This mounting rubber is found in several places on the motorcycle(the mount of the skull rack, oil cooler, plastic handles, etc.). It looks like the original, the rubber is flexible, you can bend it with two fingers with a stronger squeeze and it looks solid. Only the course of time can verify whether it is as solid. Dimensions: Hole diameter(nominal): 10mm Width of the entire rubber: 22mm Groove depth: 8mm
Review translated automatically
Reliable opinion
Used for a complete rebuild of my caliper, the piston is the same as the original. I recommend
Review translated automatically
Reliable opinion
parts in conformity with my expectations (clutch receiver repair kit) with a very correct delivery time the product is of good quality and the assembly clean with the origin I highly recommend this site, which is very clear and communicates well about the product. what's more, the drivers are friendly and smiling ( DPD ) I wouldn't hesitate to order again at a later date for my machines that I look after ( they are over 20 years old ) Mr Gernez R
Review translated automatically
Reliable opinion
Product in conformity with my request with a delivery time ultra fast and protected with handing-over in person and signature I recommend without hesitating Gmoto for the spare parts it is the second time that I order the kit of repair for my 2 motor bikes and I am satisfied with quality and the delivery you can go there without hesitating.
Review translated automatically
Reliable opinion
My motorcycle is a Yamaha XJR 1300, and I ordered a Tourmax clutch actuator repair kit from the Gmoto store. Quality of materials good. I have ordered parts for my motorcycle from this store and before. I am always satisfied: fast service and well-packed fast delivery. All questions are answered quickly and gladly. I recommend.
Review translated automatically
Reliable opinion
Sealers without complaint. In a rigid and secure package a set of sealers and covers for two leaguers. Assembly trivially easy (for those who like and have an idea of DIY and small repairs). The fit is perfect. So far zero problem and the lags work perfectly in combination with Motul 10W oil.
Review translated automatically
Reliable opinion
My machine is an 86 Honda Shadow VT 1100 . Purchased parts were not dedicated for this vintage , so as a novice user I bought blind and surprisingly they fit . Installation was no problem and the material and workmanship flawless . G Moto and product on pistket . LWG .
Review translated automatically
Reliable opinion
Valve very carefully made and probably better than the original, very good because it has a filter, and if already some fleck comes with the fuel it will not get further. I recommend this product, I installed in my moto HONDA NTV and it is great, DEFINITELY RECOMMEND.
Review translated automatically
Reliable opinion
Patient Honda CB600F Hornet, vintage 2001, non-functioning fan switch. What can I say, a top-notch product. After replacement, the fan spins and works at its best. This radiator fan switch is a great product, I would recommend it to anyone
Review translated automatically
Reliable opinion
KIT purchased and installed on a 1996 Honda VFR 750.Everything fit, it worked, I am satisfied. I will mention that I met with very friendly service. And I guess this is the main reason that I will be shopping there. No photo because the parts are already installed.
Review translated automatically
Reliable opinion
YAMAHA XJR1300SP vintage 1999, all parts fit perfectly (to the eye does not differ from the original). The piston cover and brake piston grease are missing from the set, but the old cover was OK, it stayed, and I had the grease.
Review translated automatically
Reliable opinion
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
Reliable opinion
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
Reliable opinion
I purchased the bearings with seals a few days ago for my Honda cbr 1000 f sc 21 motorcycle. The parts came to me in no time. At the moment they are waiting for installation because I have to wait until the wheel returns from painting
Review translated automatically
Reliable opinion
We fitted the bearings to a 2004 Honda Hornet pc36. The installation went smoothly and the bearings seem indestructible ;) Well, but this is Mc International after all, the top shelf among parts for Japanese ;)
Review translated automatically
Reliable opinion
The part is of very good quality, comparable to the original, everything fits as it should, works flawlessly, you can confidently drive a few seasons without looking, doing an average of up to 10,000 km per season
Review translated automatically
Reliable opinion
The above set of seals for front forks Honda Deauville NT 700 V, r.v. 2008 absolutely fine, trouble-free assembly, the product suits the type of moto, appears to be of good quality.
Review translated automatically
Reliable opinion
VARADERO XL 1000 SD01 99r. Very good quality fuel pump repair kit. The installation went without any problems. Very good fit of the parts. I recommend the manufacturer and seller.
Review translated automatically
Reliable opinion
The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.
Review translated automatically
Reliable opinion
Same as the original, but 75% cheaper. Quick response to e-mails. Although with a little more delay in delivery with respect to what was said on the page.
Review translated automatically
Reliable opinion
This mounting rubber is a great replacement for the rubbers found on the Honda CBR 600, but they are slightly smaller than the original (I personally didn't mind the installation)
Review translated automatically
Reliable opinion
Honda cbr 1100 xx, bearings for the wheel work great. Quality and fit ok. protection from water and dirt is much better than in the previously worn. I recommend.
Review translated automatically
Reliable opinion
The motorcycle is a Honda Transalp XL 600 The piston holds the dimension perfectly in every plane. The only difference is the different shape of the bottom of the piston, but this does not seem to affect the operation.
Review translated automatically
Reliable opinion
Bought to replace the original honda bearings, very good quality, fitted just right for the Hornet, very good price. Fast shipping, I recommend.
Review translated automatically
Reliable opinion
Great sealers, they fit nice and tight even though the lag was polished, so far only about 100km after replacement but no drop on the lag, I recommend
Review translated automatically
Reliable opinion
top received on time, perfect service, well packaged, no problem for transport.....good quality product for my Xjr, same as in France
Review translated automatically
Reliable opinion
I own a Honda NT650V Deauville. The seals seem solid because of the 2 spring rings. The previous ones only had one such ring.
Review translated automatically
Reliable opinion
On CBF 500A applied correctly to the radiator and it works just like the factory switch. It also seals as it should and there are no leaks.
Review translated automatically
Reliable opinion
Parts corresponding to the original start at a slightly lower temperature 85/90 degrees original start at 100 degrees aesthetics equal to the original
Review translated automatically
Reliable opinion
It works 100% pity only that the kit does not include a copper washer. To seal the connection. Other than that, the product is of good quality. I really recommend
Review translated automatically
Reliable opinion
I am satisfied everything efficiently and according to what I ordered. The ordered goods meet my expectations. I positively evaluate this store.
Review translated automatically
Reliable opinion
Sealers well made, there was no problem with the installation which indicates well-behaved parameters. Tight, oil no longer leaks.
Review translated automatically
Reliable opinion
Sealers very good quality not some cheap plastic. There are 2 springs on each sealer. Fast shipping. Recommended.
Review translated automatically
Reliable opinion
Very good product, nicely packaged and quality also at a high level, everything fit without any problem, so the CBR F2 is already laughing :d
Review translated automatically
Reliable opinion
Fit perfectly which I also expected. Would definitely recommend others to order. Relatively fast shipping, but ok
Review translated automatically
Reliable opinion
Product of good quality as always fast shipping art.I installed in Honda CB 750 Steven fifty degree of difficulty of installation 2/5 I recommend
Review translated automatically
Reliable opinion
The seals fit suzuki gsx600f. Finally stopped leaking from the suspension and its operation improved significantly. I recommend
Review translated automatically
Reliable opinion
Perfect for my 2004 Hornet. They fit perfectly, good quality for a decent price. Perfect shipping.
Review translated automatically
Reliable opinion
My second order from Gmoto and everything went smoothly from order to delivery. I will certainly recommend!!!!
Review translated automatically
Reliable opinion
We have Motorcycle parts to Honda VT 1100 Shadow
- Honda VT 1100 C3 Shadow Aero 1999
- Honda VT 1100 C3 Shadow Aero 1998
- Honda VT 1100 C Shadow 1989
- Honda VT 1100 C2 Shadow ACE 2000
- Honda VT 1100 C3 Shadow Aero 2000
- Honda VT 1100 C Shadow 1988
- Honda VT 1100 C Shadow 1994
- Honda VT 1100 C Shadow 1995
- Honda VT 1100 C2 Shadow ACE 1995
- Honda VT 1100 C2 Shadow ACE 1996
- Honda VT 1100 C2 Shadow ACE 1997
- Honda VT 1100 C2 Shadow ACE 1998
- Honda VT 1100 C2 Shadow ACE 1999