Manufacturer
Price
Sort
rodzaj:


£23.49
Lowest price from 30 days before discount: £33.55
delivery 0 £Nitro 6N11A-3A 6V 11Ah standard battery
rodzaj:
strona:
Products reviews
2019-10-01, 19:22
Paweł
Pipe without comments. On the other hand, the cable (at this stage of installation I can not comment on the quality) is simply too short by about 10 cm. After installation, I may be able to connect the pipe to the carburetor.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-11, 10:47
Piotr
Jawa 350 TS 638 The stop sensor made aesthetically. Unfortunately, it is not suitable for use, because the cables coming out of the automatic are swapped sides. This makes installation on a motorcycle impossible.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-05-07, 07:51
Jakub
Jawa 350 TS The shock absorbers fit like the orginal ones. Set to 2nd stage, when riding solo, they don't draw attention to themselves on side, sometimes dirt roads traveled in style: "hole? - then get up and go forward" :-) In deep, uneven winding roads also no objections to handling. Meaning it is ok. Ride comfort as it is on the Java - bdb Adjusting the springs DELICIOUSLY with a wrench so far has not done any damage. However, this knot does not look strong and it is worth lubricating it sometimes. Btw I have the impression that the progressive characteristic of the shock absorbers I feel on the first 2 steps of adjustment. Further ast it's just plain hard.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2015-10-30, 10:01
Sebastian
The mirrors match very well with my motorcycle and it is a Jawa 350 type 638.5 in dark brown color. So for all motorcycles in darker color they will fit nicely and not only in dark because I have previously put such in CZ 350 type. 472.6 in red and they shine just fine too. They are a nice alternative to the black-plastic originals. I recommend the store and the goods. Professional service, fast shipping and in the case of complaints factual approach to the problem. I have bought from you more than once and will certainly buy here again.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-11-12, 07:43
Greg
The writing on the box "high quality" from the start suggested that the yellow hands would take no prisoners. I was not wrong. 1. needle thicker than the original by more than 0.3mm. Impossible to insert into the throttle without machining. I tried with five throttles. Even into the most broken one it did not go in. 2. float pin - same story. 3. main nozzle - 80 (should be 92), suction - 78 (72), no pilot nozzle markings. 4. throttle cover gasket crookedly bumped. Rubbish.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-24, 10:41
Maciej
I definitely do not recommend. I was charmed by the price but it is only the price. With my weight of 100 kg they do not work at all. Already at first glance after removing from the package you can see that the wire of the springs much thinner than the original. After attaching it to the motorcycle it squatted immediately without load. I unbuckled it with my hand alone pressing only on the seat. It seems to be some kind of Chinese product. When trying to adjust it to a harder range, the aluminum shades cracked. Bubble. Avoid from afar
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-15, 22:27
Mariusz
Driving my TS 350 80km/h the counter shows 50km/h. There are no tabs in the housing that base the angle of rotation of the dial around the pointer axis. The hole for the backlight socket is too large; there is a noticeable play, and it should go in pressed. Made nicely, the pointer does not jump, but so what; the product is not suitable for use on a motorcycle used for riding. Maybe on a display copy it would work well?
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-08, 20:53
Gwalbert
Hello I own a Romet ogar 200 the list of works to do as it is in 1987 vintage did not encourage to start work I started looking for parts and surprise gmoto huge parts great description affordable prices quality very good. Understandable descriptions cool kits. First purchase for 500 zloty in two days delivery. More parts in the basket and more and more knowledge Thank you and recommend. Gwalbert
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-22, 11:41
Mikołaj
Nice kit albeit not many parts in it, could use more of them. I think the floats were misaligned or got twisted during shipping. I got two souls I think from the slow speed not signed so I do not know what they are. In general it could be But if I gave a full set with all the nozzles nozzles nozzles and other things would be nice
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-10-15, 20:02
Grzegorz
Jawa 350 TS, model 638.0. 5 clutch springs should be replaced in sets, otherwise the procedure of replacing a single spring misses the point. The new springs give the impression of putting less resistance than the previous factory springs. However, the clutch slippage has disappeared. They fit without modifications,fulfill their role.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-08, 12:13
Greg92PL
Jawa 350 TS 638.0 1988 year 12V The discs are 3.0 mm thick,more than the required 2.7 mm according to Jawa They fit without the need to grind with water paper. The clutch works as it should. Previous clutch discs of the same form lasted 4 years and 10 000 km. For the price of £20 very good value for money.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-07, 20:22
Bartłomiej
Bolts for the installation of platinums have too large a diameter. To assemble the ignition you need to grind the hole of the "anvil" minimally, the hammer fits ok. The hole of the anvil (for the screws for adjusting the gap behind the platynes) too small/poorly profiled, you need to grind with a small file to freely adjust everything.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-05-06, 10:11
Kordian
Purchase very solid and durable. Fits the ignition coil perfectly as well as the spark plug. I have not seen any ignition pipe that holds so tightly. The product is very well made, close to the original. The rubber on the pipe is also a very good idea, as it insulates the plugs from water, etc.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-24, 20:11
Janusz
damaged counter does not indicate speed only kilometers stood at 90 km / h and at shocks a little pointer moved jawa 350 model if I had not fallen when dismantling it I would have already returned it to you such parts are removed from the box and look at whether the new does not mean that it is good.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-21, 16:09
Łukasz
Jawa 50 armored type Super product, perfectly holds the plate. They look identical to the original ones. I have no reservations about the rivets. Carrying out the renovation of the motorcycle are irreplaceable. Wanting to paint the frame, you need to remove the plate and the old rivets do not properly hold the element. I recommend
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-02, 11:38
Jacek
I purchased mirrors for motorcycle JAWA 350 TS, I am very satisfied with the purchased goods because the quality of the mirrors does not differ from that described in the auction, they improve visibility and safety. In addition, aesthetic workmanship and simple and secure installation cause satisfaction with the purchased goods.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-19, 06:34
Piotr
Rivets may be expensive for such a triviality but they are great. Gently swollen in the middle with grooves that cut into the material of the hole. Thanks to these advantages, it is not necessary to seal the rivet, Just drive the rivet and it holds the plate perfectly, at the same time it does not interfere with the installation of the post.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-18, 13:16
Piotr
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-19, 10:51
Piotr
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-07-31, 14:44
Grzegorz
Fitted to a Junak 121. They did not fit perfectly, but a small adjustment of the mount with a grinder solved the problem. The shock absorbers give the impression of being soft, but they dampen larger holes very well. Now you can finally cover kilometers without worrying about biting your tongue.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-10-30, 13:36
MAREK
Mosquito Mosquito s38 1975-purchased parts are of high quality in terms of workmanship, aesthetics, efficiency of operation -I recommend many motorcycles I assemble and with this company super to cooperate-mega efficient shipping 24 hours to the other end of the Polish b.good contact with the seller.RECOMMENDED
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-17, 17:40
Krzysztof
Ogar 200 88' The kit was purchased as a spare , no less I was hoping to receive a black cable and black pipe - arrived red cable and black pipe. This does not affect the operation of what, but I would prefer to receive everything in one color
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-11-09, 16:31
Leszek
Jawa 350, type 634-7, year 1982. Dimensionally, they fit the original frame (both length and diameter of the mounting eyes). Unfortunately, the nut that changes the spring preload protrudes beyond the shock cylinder (it looks bad, in my opinion).
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-06, 21:32
Stanisław
The cable looks ok, maybe a tad too thin. Unfortunately worse is the pipe. The quality is poor and it had no transition at all when checked with a meter. Maybe the spark would jump, but wouldn't it reflect on the strength of the spark. After trying to repair it, the pipe broke.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-01, 10:31
Mikołaj
Very good quality product, made in accordance with the original, sits rigidly and securely in place (of course, it has its play so that it is not hard as concrete, because it could seriously damage the clutch). Good quality and workmanship for such a low price.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-01-18, 19:59
Paweł
Very cool kit. It includes, in addition to gaskets, nozzles, adjustment screws, needles, float. Most of the available carburetor repair kits contain only gaskets. Recommended. Fast, efficient, reliable, for the pocket is also convenient.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-07-22, 17:44
Jarosław
The mount does not fit the CZ 350.The original bolt is thicker and the rubber is also wider also there is no chance of fitting to the tank.I bought unnecessarily.Maybe it fits the Jawa 350 but I have nowhere to check because to the CZ 350 certainly not.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-11, 11:03
Piotr
Jawa 350 ts 638 Unfortunately I think I got a defective example, once it works and once it does not. You can only hear such a humming from the inside, as if the cogs did not mesh. The workmanship is aesthetically pleasing. But the shortcoming of the operation spoils the opinion
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-14, 22:49
Paweł
My motorcycle is a 1984 CZ 350. The shock absorbers arrived quickly, packaged decently. There was no problem with installation, they fit the motorcycle, I will evaluate the workmanship of the shock absorbers after a ride, weather permitting.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-06-05, 21:31
Dawid
A new pipe not only improves the consistency of spark, but also visually beautifies the engine. If, in addition, you get a stylish cable for such a low price, and maintained in high quality, it is a typical "must have" for the new motoring season.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-19, 12:45
Rafał
Cezet 175 487 - mirrors very well made, they fit perfectly into the holes in the motorcycle. They reflect the space reflected in them very well. After installing the mirrors, the aesthetics of my motorcycle improved on the plus side.
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-19, 07:41
Jan
Pipe generally not worth even 1 zl, is not suitable for anything rather I would remove it from the offer gmoto, it's a shame to spoil the reputation, maybe only I came across such a defective copy, but in mine even the plug did not come off :/
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-07-15, 10:54
Filip
I ordered an ignition pipe plus cable it is super quality it fits my motorcycle perfectly it is great aesthetically the cable is long just as I needed it goes in perfectly on the spark plugs nothing more nothing less fabulous
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion