Forgot password
Order status
Free delivery from euro
Manufacturer
Price
Sort
Rozmiar:
£72.88
CDI ignition non-contact stator 12V Romet Ogar 205 Motorcycle Komar - 1249180
(3) 
Options +2 £11.04
Plate - sheet on motor gaskets kryngelite Gambit AF-Oil thickness 2.0mm 375x500 mm
(5) 
Options +2 £8.49
Plate - sheet on motor gaskets kryngelite Gambit AF-Oil thickness 1.0mm 375x500 mm
(5) 
ilość zębów:
Podobne:
£1.02
Rubber of the crankcase of the spark gap - high voltage cable Duells Romet - 2988872
(1) 
Browse by manufacturer
Products reviews
Chinese CPI 50cc 2t - the frame certainly improves the aesthetics of the moto. Stably holds the plate and there is no chance for it to fly out while riding. Installation is easy and fast, worth recommending:)
Review translated automatically
Reliable opinion
Product of very good quality, it fits Romet Ogara 200 very well. The frame does not interfere with either the lamp on the fender or the splash pad. I recommend :)
Review translated automatically
Reliable opinion
Motorcycle Romet Pony vintage 1984.Quality as well as workmanship of this item very good. For more than a year zero problem
Review translated automatically
Reliable opinion
Ogar 205 . Rubber strong on the pattern of the original, the installation went without a problem, it looks nice
Review translated automatically
Reliable opinion
romet 50t1 fits works strong spring recommend fast shipping
Review translated automatically
Reliable opinion
I did not expect miracles regarding the fit, and I was not disappointed. Of course, I could have fiddled a bit by reaming the screws in the base of the coils, but why ? It is simpler to use a hammer, which I also did, and adjusted the clearance between the coil and the magnet. Simple and uncomplicated. The coil generates a spark that kills a horse, and it certainly generates delightful bio currents, as I found out personally. The important thing is that it works and doesn't look like it was made in a sheltered workshop. The wire with the eyelet could be shorter, and yes you have to think a bit about how to arrange it which can cause acute pain of existence. Or shorten it, which I did not do. The longer one is the right length, and after crimping the connector its arrangement does not cause intellectual pain of existence. The output to the WN wire is OK.
Review translated automatically
Reliable opinion
Benelli 491 98r I was tempted to buy a frame from gmoto because when I bought something in the service and got a lanyard with the signature gmoto free of charge nice gesture fell to my liking so much that I wanted and frame for registration because it caught my eye somewhere there and the choice quite right why the quality without comparing to those frames from the office solid does not crackle holds the plate as expected does not vibrate the plate on the free under the plate a lot of holes and a lot of space for screwing such a head m8 fits easily visually polished and the same signature is not the usual print but a kind of silicone sticker and most importantly the clips hold like hell I do not have to worry about losing the plate
Review translated automatically
Reliable opinion
Romet moped bell in chrome is a sturdy, easy-to-install accessory, perfectly matching the motorcycle. Its loud sound ensures safety on the road, attracting the attention of other traffic participants. Aesthetically, it looks great, adding elegance to the appearance of the moped. It is a practical and stylish item worth having, especially if you want to stand out on the road and emphasize the character of your vehicle. Its versatility makes it fit a variety of moped models, making it an even more valuable accessory. Highly recommended :)
Review translated automatically
Reliable opinion
The product made in very good quality. I was very surprised by the quality of the cables, they are very soft by which they are flexible, which means that they can be hidden in an invisible place. very nice and aesthetically pleasing workmanship, until it is a pity to cover with a cover. Installation very easy, even 0 setting, installation and the motorcycle fires up. Much more convenience than ignition with platnki. For a minor minus I could add the installation of the ignition coil on the tritite, a little incompatible with the high quality workmanship of the product. Overall, the product is very good, driver-friendly.
Review translated automatically
Reliable opinion
I bought a cog for my motorcycle, I looked at several cogs in stationary stores, I took a chance on this one from Gmoto and what a surprise, what I cared most about was the internal brass bush to have a sufficiently thick wall and length, so that the cog will serve a long time and this Polish-made cog (if it is so, it is an additional advantage) has met my expectations.
Review translated automatically
Reliable opinion
I purchased the throttle for a Komar 2330 1972r moped, these are not my first purchases in GMOTO and also not the last. The product, as befits a replacement of very good quality, fits perfectly to the original carburetor and fulfills its purpose, the engine after overhaul with a new throttle fires perfectly and there is no problem with speed regulation. I recommend!
Review translated automatically
Reliable opinion
For a long time I rode without this sheet metal, the handle fell out, it was not comfortable, I could not find this part anywhere. I tried to make something on my own, but to no avail. After installing the metal plate, everything works as it should, complete with a new gas line and a new handlelet everything came together in a beautiful whole :)
Review translated automatically
Reliable opinion
Good prices, some products available only here. I bought rubber shock covers - they fit bicycle shock absorbers. The originals are not produced, so this is the only place to get such a thing at normal money. The quality does not knock, but for the price it is as OK as possible. I recommend!
Review translated automatically
Reliable opinion
Romet Ogar 200 1988. The plate fits perfectly in its place fulfills its function. Aesthetically it is made very well, and is made of good material. The only drawback is that the kit did not include a screw to secure this plate, but so I have no complaint about this product.
Review translated automatically
Reliable opinion
Jawa 50 armored type Super product, perfectly holds the plate. They look identical to the original ones. I have no reservations about the rivets. Carrying out the renovation of the motorcycle are irreplaceable. Wanting to paint the frame, you need to remove the plate and the old rivets do not properly hold the element. I recommend
Review translated automatically
Reliable opinion
Rivets may be expensive for such a triviality but they are great. Gently swollen in the middle with grooves that cut into the material of the hole. Thanks to these advantages, it is not necessary to seal the rivet, Just drive the rivet and it holds the plate perfectly, at the same time it does not interfere with the installation of the post.
Review translated automatically
Reliable opinion
Some wonderful gasket sheets seriously I highly recommend them very highly they are amazing awesome seriously you have to try them you lose nothing nothing nothing nothing and when I say nothing nothing is nothing nothing nothing oil they are spectacular really if lks recommend 100%.
Review translated automatically
Reliable opinion
KOMAR - I bought for a mosquito, the dimensions match the original ones I removed. A big plus for GMOTO for the well-stated dimensions in the item description - as if I had suggested only the name of the type of bushings for the mosquito, they would not fit my equipment.
Review translated automatically
Reliable opinion
After replacing the old steering wheel clamps with these new ones really nicely looks my ogar 200, the installation was very easy and the effect is really satisfactory, I recommend to anyone who has rusty clamps, because for so little you can gain really much :)
Review translated automatically
Reliable opinion
Like the first gasket papers amazing awesome how well they do their job not one spectacular oil leak amazing awesome awesome I am tremendously grateful for selling such a good quality material ole!
Review translated automatically
Reliable opinion
Frame like a frame. The plastic is fine, the fit to the holes is fine, it's just a pity that it comes already snapped, because you have to gently disassemble it from behind releasing the catches to insert the board and snap it back in.
Review translated automatically
Reliable opinion
As the name suggests: delux. The rubbers complete the image of the front suspension of the Mosquito, they fit perfectly, look beautiful, are of very good quality, optimally flexible. In a word: perfect. I highly recommend
Review translated automatically
Reliable opinion
The bushings before being scooped into the fork fit nicely after scooping it was no longer so good you need to keep this in mind preferably after powder coating the fork clean the bushing area to bare metal then there will be no problem.
Review translated automatically
Reliable opinion
Hello I own a moped Barton Fighte3 4t 2011 year capacity 50cm. The motorcycle works very well sometimes there are small adjustments, there is a small problem with parts but it is good and I am satisfied with it I recommend it
Review translated automatically
Reliable opinion
I own a Komar 2350 from 74r with s38 2 gear engine . Axle fits perfectly but it is a pity ze bearings for it are in a separate auction you have to search a little. The solution is better than the old garlands. I recommend.
Review translated automatically
Reliable opinion
Yamaha dt 50re Frame very well made, the quality of the plastic is sensational and the number of mounting holes allows you to accurately attach the frame to the holder. For the price of 7zl you will not find anything better.
Review translated automatically
Reliable opinion
The quality of the frame very good, the plastic does not seem shoddy at the first touch, the hooks look ok. Longer time of use should verify the product better, but I have good thoughts. I recommend
Review translated automatically
Reliable opinion
ROMET OGAR 205 50CCM 1988 YEAR I purchased for my ogar 205, the fit as well as the quality is very good, significantly refreshes the appearance at a very small cost. Great quality for the price.
Review translated automatically
Reliable opinion
I rate the quality of this holder as very good I could not all the time fix the spring, but I bought this holder and succeeded aesthetics at a high level. The holder fit perfectly to Romet Ogar 205.
Review translated automatically
Reliable opinion
I own a Rometa ogara with a 50ccm yawl engine The parts are of very good quality, I did not have to struggle with their installation I heartily recommend if you want good parts :D
Review translated automatically
Reliable opinion
Worthless product. The place of bearing seating- the middle part of the axle has a smaller diameter( 9mm) than the thread ( 10mm). The bearing after installation has a play on the axle of 1 mm.I advise against the purchase of this product
Review translated automatically
Reliable opinion
- The purchase turned out to be a shot in 10! The product meets the requirements, the quality is perfect, everything is as described, the company on the level and the shipment was prompt. I recommend everyone to purchase from GMOTO.PL!
Review translated automatically
Reliable opinion
Quality license plate frame from Gmoto.pl. Fits well on the moped, holds tight and looks solid. Assembly is easy, material looks durable. For the price an excellent choice, I am a satisfied customer.
Review translated automatically
Reliable opinion
quality of workmanship very good, the sleeve for the pin well fitted, no play on the crank goods really recommendable, fits the engine with the designation (019) 3 gears
Review translated automatically
Reliable opinion
I own a Derbi Senda year of production 2006 registration frame fits mounting on the rear fender you can see it is done perfectly,very nice fit inscription at the bottom Gmoto.pl
Review translated automatically
Reliable opinion
I own an unusual moped which is a 1982 Honda pa 50 the installation of the frame went very well the board sticks and does not vibrate I recommend to all who are planning to buy.
Review translated automatically
Reliable opinion
Romet Ogar 205, a large number of mounting holes makes it unnecessary to drill new holes in the fender. Aesthetically made, a nice addition to the exterior.
Review translated automatically
Reliable opinion
Ogar 200 Product as described fast delivery and good contact with the seller store worth recommending. And really careful protection of purchased items .
Review translated automatically
Reliable opinion
fits
Review translated automatically
Reliable opinion
Romet 50t1 The sprocket fits on the shaft without problems, the chain also sits "wporzo" as for durability I can not comment, you need to wind some kilometers.
Review translated automatically
Reliable opinion