Motorcycle parts
Suzuki GSX 750 F 1989

2018-11-02, 09:29

View original

Aleksander

WSK 125 75r | The frame fits in the org. holes in the rear lamp mount. I recommend, because this product is worth its price and it is practically indispensable in the mounting of the plate.

Reliable opinion

2020-04-28, 09:34

View original

Piotr

In this price range, there is nothing to complain about. The product will do its job. It should certainly survive more than one motorcycle trip.

Reliable opinion

2021-09-11, 06:32

View original

Roman

Suzuki DR 125 well made, the right length of wires, copy-paste installation. Recommended.

Reliable opinion

2024-06-01, 13:30

View original

Kamil

Honda Hornet 600 pc34 from 2001, they fit perfectly to the lags of the motorcycle, quality of workmanship at a high level, the rubber is not old and holds very well, the sealers and anti-dust themselves come in a box, in which there are nicely separately sealer and anti-dust, in addition, the timing of implementation, shipping and delivery at a fast level, as highly recommend :)

Reliable opinion

2022-03-27, 15:37

View original

Artur

The ordered turn signal arrived to me in express time. After the fitting, it fits the motorcycle perfectly. The rubber arm of the turn signal is as flexible as in the original, which in case of a rollover does not threaten to break the direction as it happens in cheap Chinese fakes. I recommend with a clear conscience. Good quality goods and at a reasonable price.

Reliable opinion

2022-03-09, 09:06

View original

Adrian

Unfortunately, the frame is made very poorly, due to carelessly cast material at the edge, the license plate does not fit and it is impossible to close the latches. It is better to spend a few zlotys more for a better quality product that will have the correct dimensions. Despite the not too bad aesthetics, I advise against the product, it does not serve its purpose.

Reliable opinion

2017-08-17, 11:53

View original

Krzysztof_Suzuki

I own a motorcycle Suzuki Intruder VS 600, vintage 1995, I purchased the starter relay, I was mildly concerned about whether it would fit in terms of size, that is, whether it would "fit", but it worked out great, it fits perfectly, the motorcycle runs, burns to the touch, I am very satisfied with the purchase, the product 100% met my expectations

Reliable opinion

2017-04-28, 15:45

View original

Krystian

I own a Suzuki dr 650 rs motorcycle from `92. The starter relay was professionally packaged. After taking it out of the foil, I was surprised by the quality of the materials used and the appearance almost identical to the original. Installation without any problems and proper fit of the brackets. It works as it should.

Reliable opinion

2020-08-17, 10:11

View original

Katarzyna

The turn signal for the GSX 600 F model fits perfectly. It does not differ from the original ones. Made durably, nicely, aesthetically pleasing and with good materials. Easy and trouble-free installation. Low price in relation to really good quality even surprises. Order without a second thought

Reliable opinion

2018-09-05, 21:49

View original

Marcin

Honda VTX 1800C 2002, purchased relay fits, although it is not in your specification :-), cheap, good and fit, plus it "saved my motorcycle" from forced parking and looking for a relay "not sure where" :-) Thank you and recommend

Reliable opinion

2023-07-15, 05:33

View original

Kamil

Frame very cool massive with a cool composing company logo unfortunately I did not use the purchased item because my board is smaller than I anticipated ? but the frame itself I highly recommend as I will measure the size of the board I will order another one like it

Reliable opinion

2024-01-11, 07:04

View original

Jacek

The element is made of good quality plastic, allows for repeated mounting and dismounting. The number and size of the mounting holes allows you to conveniently adjust the mounting of the element. Shape and aesthetics of workmanship at a really good level

Reliable opinion

2017-04-23, 10:31

View original

Rafał

Honda vtx 1800 Neo motorcycle. For this motorcycle fits almost perfectly. All contacts and size identical to the original honda. The mounting holes are minimally differently spaced, but you can confidently rewire the mounting bracket from the original because it also fits.

Reliable opinion

2022-01-24, 07:32

View original

Bogusław

License plate frame very solidly and aesthetically made, the size of the plate perfectly matches the size of the license plate, the mounting holes of the frame even fit into any bracket that are found at the motorcycle.

Reliable opinion

2019-05-17, 13:57

View original

Przemysław

Honda St 1300 126 hp 80k hp 2002r , I bought the motorcycle in the commission and there standard commission frame, a little diso-polo with such a ride that's why the frame with the inscription HONDA will perfectly match the new machine ;)

Reliable opinion

2017-12-10, 17:35

View original

Michał

SuSan Intruder VS 800 Motor did not smoke on the starter, after replacing the relay Susan fired up with no problem. Relay very well made very similar to the orginals screws fit the hole in the fender.

Reliable opinion

2018-01-29, 08:37

View original

Daniel

The relay fits perfectly (holes,terminals,contacts), works flawlessly, the motorcycle fired up from the first kick. Workmanship quality very good, I am very satisfied. Motorcycle is Suzuki DR650 RSE '91

Reliable opinion

2019-03-29, 10:25

View original

Roman

I have 2 old oilers reliable equipment frames fit like a glove I bought 2 pieces well fitted to the dimensions of the board simple to use good material highly recommend

Reliable opinion

2017-05-29, 13:46

View original

Oskar

Suzuki dr 350 product purchased fit perfectly, the motorcycle rides all ok I am very satisfied with the cooperation, I recommend to all motorcyclists

Reliable opinion

2020-04-04, 11:14

View original

Adam

Romet scmb 125, I bought a frame for the reg plate.Appearance , size, quality, price - very good. I recommend! Delivery prompt and well packaged.

Reliable opinion

2024-03-13, 08:43

View original

Piotr

What to write. A lot of screw cutouts to fit and screw centrally in each vehicle. Also in a Chinese electric. Fits like a glove.

Reliable opinion

2020-08-10, 11:07

View original

Grzegorz

Suzuki DR-125 model 1998.The turn signals fit perfectly into the factory holes. Installation very easy. Workmanship/aesthetics very good.

Reliable opinion

2021-11-11, 16:39

View original

Paweł

Benelli TNT 125 quick and easy installation for everyone. Shipment ordered for parcel machine shipped quickly. I recommend this product to everyone as well as the store.

Reliable opinion

2022-01-31, 08:22

View original

Wojciech

This is not the first time I have ordered from Gmoto yet I have not been disappointed shipment always fast on time products also as described I recommend

Reliable opinion

2019-06-23, 15:38

View original

Mateusz

Suzuki, GS500, 500, 2005 Direction shines as it should. Easy to install, good quality. Overall, nothing more is needed for happiness :)

Reliable opinion

2020-12-28, 09:34

View original

Tomasz

The locking element of the plate falls out, so I screwed it on. Once I had a similar patent and lost the plate, then I did not screw.

Reliable opinion

2022-04-11, 15:01

View original

Konrad

Very good workmanship, prompt delivery. Implementation in accordance with the order. Product definitely worth recommending.

Reliable opinion

2017-06-25, 02:58

View original

Marcin

The product 100% as described, workmanship and quality of materials used very good and most importantly, it fulfills its function.

Reliable opinion

2020-08-24, 18:28

View original

Arkadiusz

It's a pity that in the feedback there is no option of feedback to deliver, here you should be rated three, the rest as in the best order

Reliable opinion

2018-05-17, 19:55

View original

Krzysztof

Honda VTX1800/2007.Fits perfectly after mounting on old bracket.Works without any problem.Fast shipping.I recommend.

Reliable opinion

2018-02-05, 22:13

View original

Mariusz

The purchased product was 100% as described and I have no reservations about the product. I recommend shopping at Gmoto.ok

Reliable opinion

2024-05-03, 06:48

View original

Michał

Everything in the best possible order. Frame made of good quality plastic, sheet metal fits it and holds well.

Reliable opinion

2021-02-02, 18:03

View original

Piotrwien

Instant shipping products as described very good contact with the seller. I recommend with a clear conscience.

Reliable opinion

2023-06-11, 09:16

View original

Robert

Service stickers look good just in time to stick on the old cardboard box. Highly recommended to those interested.

Reliable opinion

2022-05-28, 13:11

View original

Ksawery

Chrysler Voyager 2.5 TD, 1998. The sticker is a much better solution than the tag, it is impossible to lose it.

Reliable opinion

2022-03-14, 12:03

View original

Wojciech

Fast delivery, excellent contact with service, very good workmanship, fits perfectly , highly recommend,

Reliable opinion

2024-02-01, 08:58

View original

Iwona

An indispensable tool for any motorcyclist or workshop to properly take care of the chain in his motocycle.

Reliable opinion

2022-08-21, 21:47

View original

Daniel

Good quality merchandise The product does its job there was no problem with installation I am satisfied with the purchase

Reliable opinion

2020-04-17, 00:14

View original

Konrad

The frame very nice, everything gave a good installation. It is a pleasure for me to represent your store :)

Reliable opinion

2023-02-28, 22:57

View original

Daniel

Product good quality can be said to be on par with the original. Quality of fit at a high level

Reliable opinion