Motorcycle parts
Yamaha WR 125 - Page 8

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2021-05-31, 09:52

View original

Piotr

Yamaha TDM 850, 93r. Good quality seals, hassle-free installation, the product does its job as much as possible, the suspension sealed 0 oil leaks. And on top of that the price is wallet friendly.

Review translated automatically

Reliable opinion

2019-01-12, 09:03

View original

Andrzej

Honda Cbf 500 2007. Sealers very good quality . Hassle-free installation. You can see at a glance that it is an original product of Athena.Oil burning I have already.I recommend.

Review translated automatically

Reliable opinion

2019-07-16, 20:34

View original

Bartłomiej

Hyosung gv125 Aquila year 2007 Candles replaced without any problem. Quality and appearance as it should be-motor Fires at once . Recommended product.

Review translated automatically

Reliable opinion

2020-09-18, 09:19

View original

Koziołek

The product as advertised. In my case it works great with the Yamaha YZF-R125 model. The filter 100% fulfills its role. I recommend :)

Review translated automatically

Reliable opinion

2024-05-03, 10:27

View original

Patryk

Very well made filter, both the housing and the filter itself inside, at the back a great quality metal protective mesh

Review translated automatically

Reliable opinion

2021-02-22, 09:26

View original

Arkadiusz

Yamaha FJR 1300, vintage 2003. the CR8R spark plug is dedicated by the service center to fjr 1300.

Review translated automatically

Reliable opinion

2019-03-31, 12:52

View original

Michał

The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.

Review translated automatically

Reliable opinion

2024-10-02, 06:12

View original

Bogdan

Hello Iridium spark plugs are currently the most technologically advanced type of spark plugs. They have center electrode tips made of iridium, a highly durable precious metal from the platinum group. The use of the precious metal made it possible to use a thinner center electrode - even 0.4 mm, NGK iridium spark plugs I use in my motorcycles improve the culture of the engine works more smoothly and dynamically very long life. I heartily recommend.

Review translated automatically

Reliable opinion

2023-07-01, 06:20

View original

Andrzej

The HifloFiltro HFA 4106 air filter, is solidly built and a perfect fit for my 2011 Yamaha WR 125X motorcycle. It clearly shows high quality workmanship, which translates into great performance. It fits perfectly, as evidenced by the careful fit. I am convinced that this air filter does its job perfectly, and I highly recommend it to all Yamaha WR 125 owners who want to take care of long-lasting and efficient engine operation.

Review translated automatically

Reliable opinion

2023-12-04, 17:53

View original

Królewski

I recommend replacing the original without any problem. Charging ok and when the engine is turned off it does not draw 0 milliamperes from the battery. Motorcycle stands all the time with the battery connected is all right. Manufacturer trusted product that meets all requirements. Package quickly efficient as always at this location. Installing in Yamaha XT 250 Japanese version.

Review translated automatically

Reliable opinion

2023-07-01, 06:26

View original

Andrzej

The HifloFiltro HF 141 oil filter, is an ideal choice for the Yamaha WR 125 engine. Made of solid materials, it fits my motorcycle perfectly. Its high quality workmanship and effectiveness in cleaning the oil are commendable. I highly recommend this oil filter for all Yamaha WR 125 owners who are looking for excellent performance and engine protection.

Review translated automatically

Reliable opinion

2020-04-23, 23:04

View original

Adam

In my opinion, the filter is very good quality and fits any yamaha yzf125 without any problem. And don't worry that maybe it won't fit your model, I thought so too and it was wrong thinking. It basses me without a problem and a friend I recommended it to also fits his yzf125 without a problem. There is nothing to complain about.

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2020-06-06, 06:55

View original

TOMEK

Large selection of parts of good quality, despite the poor selection of some parts on my part with the exchange was not the slightest problem, quick and easy return form, in addition to the immediate telephone contact from the seller ! on the return. Professional approach to the customer! I recommend this store !!!

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2017-07-11, 09:59

View original

Mariusz

I am a happy owner of a yamaha yzf 125r in which I recently noticed oil loss , I replaced the valve seals which I ordered from gmoto and I am very satisfied , solidly made . Easy to install and fit to my 2010r model I recommend to everyone.

Review translated automatically

Reliable opinion

2017-07-11, 09:59

View original

Mariusz

I am a happy owner of a yamaha yzf 125r in which I recently noticed oil loss , I replaced the valve seals which I ordered from gmoto and I am very satisfied , solidly made . Easy to install and fit to my 2010r modelj recommend to everyone.

Review translated automatically

Reliable opinion

2020-12-11, 10:21

View original

KONRAD

I own a yamaha yzf-r125. I always buy these oil filters. And there is never a problem with them. They are made aesthetically, accurately never anything stands out and they always fit. It never happened to me that it was made not symmetrically and did not fit. I highly recommend the product.

Review translated automatically

Reliable opinion

2024-05-04, 05:38

View original

Marek

When ordering the product I trusted the configurator to fit the product to the motorcycle, and rightly so because it is very good. The gasket fits the 2009 Yamaha MT03 perfectly, nothing lets go. It looks better than the original. Highly recommend, fast delivery

Review translated automatically

Reliable opinion

2022-01-16, 18:05

View original

Krzysztof

Yamaha Midnight Star XVS 1300 vintage 2013 Although it's a replacement it fit perfectly in place of the damaged original. It works flawlessly and considering the price .compared to the original it compares very well .

Review translated automatically

Reliable opinion

2020-12-13, 07:22

View original

Paweł

I have never been fond of replacements, however, the quality of this product is surprisingly good for the price. I hope I won't have to again, however, if need be I will return to this product without hesitation.

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2024-05-03, 15:21

View original

Adam

Chain very well made. The fit is perfect. I can honestly recommend. After driving about 300 km since putting it on, I don't have to pull anything up. It is as it was the day I put it on so it will rather last a long time.

Review translated automatically

Reliable opinion

2024-05-05, 19:42

View original

Jacek

I've been through various spark plugs, including the more expensive iridium ones, but I think the best ones for touring are the basic NGK CR8E ones. I recommend and hope that the product will stay with us for years :).

Review translated automatically

Reliable opinion

2025-04-30, 07:14

View original

Hajek68

The goods arrived safely. Just originally packed and in order. Exactly matches the specification for my bike. I am very satisfied. Unfortunately I don't have photos, the plugs are already fitted.

Review translated automatically

Reliable opinion

2021-04-05, 16:38

View original

Michał

I bought the product for 2009 Yamaha YZF R125. The workmanship does not differ from the original, and of course the price is much lower, so I highly recommend this product.

Review translated automatically

Reliable opinion

2025-09-03, 10:02

View original

Zdenek

The goods for this price are of high quality and super -satisfaction.I have several filettes from this manufacturer and always perfect. This seller is the best so far in terms of other goods.

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2023-05-30, 06:59

View original

Paweł

Hello, I would like to share my opinion about this product.This filter is very good quality for the price.It fits almost any brand motorcycle with 4t engine.

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2025-04-07, 05:14

View original

Ivilin

Fast delivery Fits exactly Great communication Recommend to others Anytime again One of the few dealers who still has a suitable battery!

Review translated automatically

Reliable opinion

2019-06-10, 20:27

View original

Wojciech

Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement

Review translated automatically

Reliable opinion

2024-12-26, 09:22

View original

Kai

The gaskets fit perfectly and are also really inexpensive. They are in no way inferior to the higher-priced gaskets. Shipping was also very fast.

Review translated automatically

Reliable opinion

2017-07-15, 03:51

View original

Gixxer

The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one

Review translated automatically

Reliable opinion

2020-08-08, 13:12

View original

Rajmund

The motorcycle is a honda transalp 600 1996r.The element fit perfectly without any reservations thanks to good workmanship and fit the repair went quickly and efficiently.Regards

Review translated automatically

Reliable opinion

2020-12-11, 12:20

View original

KONRAD

Very good product. Quality of materials very good fulfills its purpose 100%. Fits perfectly. No damage to the product everything done professionally.

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2024-07-29, 06:37

View original

Bartosz

Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.

Review translated automatically

Reliable opinion

2024-07-05, 06:46

View original

Krzysztof

Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996

Review translated automatically

Reliable opinion