Motorcycle parts
Yamaha XP 500 T-Max - Page 7

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Reliable opinion

2020-06-03, 11:54

View original

Adrian

Mounting pin, fitted very well to the fairing of a Yamaha fz 8 motorcycle. The transaction went smoothly, fast delivery.

Reliable opinion

2019-03-31, 12:52

View original

Michał

The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.

Reliable opinion

2019-04-13, 21:13

View original

Mariusz

I am a very satisfied owner of a 1995Yamaha XJ 900 Diversion motorcycle.The vehicle is absolutely trouble-free but due to its age, the swingarm bearings had to be replaced.I purchased a set of Tourmax bearings.The bearings and the simmering rings supplied in the set matched perfectly which made the replacement a pleasure.Now my equipment rides like new again.I would recommend this set to anyone who has a similar fault to eliminate in their equipment.If all the parts were made with such accuracy, I could boldly become a mechanic ;)

Reliable opinion

2022-06-16, 22:36

View original

Boszu

It fits the 2008 Yamaha XVS 1300 VStar. But I personally recommend, however, to order a filter with a keyed end, because when replacing it, you have to punch holes in the old filter to unscrew it. (No room for specialized tools) And when screwing on the new one, you have to tighten with an old-style leather strap, because another tool will not fit, and in your hands you will not tighten enough also due to lack of space.

Reliable opinion

2021-02-16, 11:19

View original

Oleksandr

I have a Yamaha XJR 1300 motorcycle and needed sealers and hoods for the lags. The hoods in the front suspension were still original and I just wanted the look to stay the same. Because of this and I bought this kit. And plus it turned out to be a good quality product. Hoods and sealers quite flexible and fit perfectly in their places. I am very satisfied. I recommend.

Reliable opinion

2024-02-27, 13:14

View original

Radoslaw

Voltage regulator made of good materials, fits perfectly and also perfectly performs its function. I have been using it for some time now, it works flawlessly, so I can confidently and in good conscience recommend it to others who are interested. I really recommend it.

Reliable opinion

2021-02-09, 10:48

View original

Marcin

Seemingly just a pin however, it allows even a 20 year old motorcycle to retain its original appearance. They do not differ in appearance and quality at all from those originally used for the installation of fairings in my 2000 Hayabusa.

Reliable opinion

2020-09-20, 14:21

View original

Rafał

Honda XL 125 Varadero year 2006. fairing mounting pin fits perfectly, made very solidly, made of strong plastic material. Matched very well to the original, virtually indistinguishable.

Reliable opinion

2023-12-30, 08:43

View original

Marcin

The part is of very good quality, comparable to the original, everything fits as it should, works flawlessly, you can confidently drive a few seasons without looking, doing an average of up to 10,000 km per season

Reliable opinion

2022-01-27, 10:50

View original

Sławomir

The pins fit the rump (including the plastic filling for the tail lamp) on the Suzuki SV650n K8. They perfectly replace the lost originals - there is no play, they do not fall out and do not break in the hands.

Reliable opinion

2025-02-20, 17:53

View original

Grzegorz

Wszystkiego się zgadza. Co tu dużo pisać! Firma Gmoto jest wiarygodna i profesjonalna, Oryginalną firmą z bardzo dobrą jakością części i nie tylko ... POLECAM. NADWYDAJNIE... Dziękuje

Reliable opinion

2019-12-24, 07:54

View original

Robert

VARADERO XL 1000 SD01 99r. Very good quality fuel pump repair kit. The installation went without any problems. Very good fit of the parts. I recommend the manufacturer and seller.

Reliable opinion

2022-07-23, 13:57

View original

Wiktor

Honda Varadero 125 2007r (polift) The pin looks and fits the same literally dot to dot as the original. So I confidently recommend the more that the price is better than in ASO

Reliable opinion

2019-07-07, 20:55

View original

Bartłomiej

Everything ok, the pin fits nicely and holds the fairing well, even after several times of removing the fairing and driving several thousand kilometers everything holds HONDA CBR F4 2000r.

Reliable opinion

2017-07-15, 03:51

View original

Gixxer

The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one

Reliable opinion

2024-07-29, 06:37

View original

Bartosz

Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.

Reliable opinion

2024-09-20, 05:34

View original

Dejan

Super zadeva prilagaja se odlicno kakovost super 100%

Reliable opinion

2020-11-17, 09:25

View original

Jacek

Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.

Reliable opinion

2020-11-17, 09:25

View original

Jacek

Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.

Reliable opinion

2023-11-06, 15:55

View original

Bartłomiej

Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5

Reliable opinion

2024-09-20, 12:19

View original

Gregor

One of the best aftermarket oil filters. If you don't have a torque wrench fit it hand tight, lube the threads with engin oil before fitting.

Reliable opinion

2024-11-07, 15:27

View original

ΠΈΤΡΟΣ

Πολύ καλό προϊόν εγγυημένα το λέω χρόνια βάζω αυτή την εταιρεία κανένα απολύτως πρόβλημα και οικονομική σε σχέση με τα γνήσια .

Reliable opinion

2025-01-26, 07:03

View original

Slabu

Totul perfect, timp de livrare exact ca pe site, impachetare impecabila, calitatea produselor foarte buna, nimic de reprosat.

Reliable opinion

2025-01-11, 14:05

View original

Rafael

Produto como esperado, e chegou mais rápido que o prazo previsto. Correspondeu a tosas as expectativas. irei voltar a comprar

Reliable opinion

2024-09-19, 07:45

View original

Ionut

Nu se potrivesc mai nicaieri la R1 din 2003, le-am cumparat degeaba, iar unul a venit bucati si a trrbuit sa l arunc direct.

Reliable opinion

2024-09-26, 07:41

View original

József

Még nem kerűlt beépítésre.Az anyagminőség és a kidolgozás jónak rünik.Szerintem az ár-érték arány teljesen rendben van.

Reliable opinion

2024-12-19, 19:06

View original

Michal

elegancki, ladnie pasuje do CBR125R aczkolwiek oryginalne wygladaja inaczej, ale i tak bede musial dokupic jeszcze drugi

Reliable opinion

2024-09-19, 07:04

View original

CHASLES

Se monte sans problème en lieu et place de l'ancien, semble identique a l'original tant en esthétique qu'en solidité.

Reliable opinion

2024-11-07, 08:28

View original

Furui

Geliefert wie bestellt. Alles in Ordnung. Ich würde wieder bei GMoto bestellen. Es ist ein verlässlicher Lieferant.

Reliable opinion

2018-04-06, 08:32

View original

Krzysztof

Yamaha Virago 750 Year: 1995 Front wheel bearings replaced - motorcycle rides - SUPER - recommend greetings

Reliable opinion

2025-02-20, 05:52

View original

damir

uobicajeni filter pocnajpovoljnijoj cijeni i super brzoj dostavi. zadovoljan sam uslugom i isporucenim proizvodom

Reliable opinion

2024-10-14, 16:57

View original

Marcin

Bearings of very good quality I order for the next timeideally fit the model selected in the search engine Gmoto.

Reliable opinion