Motorcycle suspension - parts - promotions: 1page=2page=2page=2page=2page=2page=2

Browse by manufacturer

Venbo W55 Kengo CX Complex MZA Athena Tourmax All Balls SKF JMP Orlen Ari Motul Bearing Worx 101 Octane Valvoline KJ Prox Castrol Ariete

Products reviews

2024-07-21, 18:33

Zbigniew

Hyperpro rear suspension lowering kit by 30 mm

High quality product. Precisely made. Each element marked with a laser description of the manufacturer. On the manufacturer's website there are certificates allowing the item to be used. The package includes a short instruction manual (unfortunately, there is no Polish description), but the steps to be performed are simple enough that anyone should be able to cope with it. The manufacturer warns that after replacing these elements it may be necessary to shorten the side feet - this is what happened in my case on a 2017 Honda x-adv. The expected effect - lowering the motorcycle - was achieved. During the test ride (about 100 kilometers), I do not feel the effect of changing the suspension elements on the comfort and safety of the ride.

Esthetics:
Material quality:
Fitting:

Reliable opinion

2024-10-28, 13:57

Patryk

Rear shock absorber set of 2 pcs WSK 125 175

Shock absorbers at a very good price. Strong paint job, working adjustment. Wsk 125 has mounting holes for shock absorbers for m12 bolts The shock absorbers have an upper hole m12, but the lower hole is for an m10 bolt. The solution to the problem in my case was to make a new bushing with a larger diameter. It was able to be pressed into the rubber of the shock absorber without any problem. Also, due to the fact that the WSK motorcycle shock absorbers on the mount at an angle, I recommend putting the appropriate large washers to prevent slipping of the shock absorber, which often happens. I recommend and encourage you to buy!

Esthetics:
Material quality:
Fitting:

Reliable opinion

2024-06-17, 04:24

Michał

FORK BUMP RUBBER 18MM

I am happy to recommend GMoto company. I ordered a hard-to-find part for the front suspension from them, and it was a rubber bumper from Kayaba, which with 100% certainty fits the '03 YZ250F, because I put it on that motorcycle. If they didn't have it I would have had to send the part from Japan - which would have been very expensive. Quality, fit appropriate for the price. I recommend to all interested parties

Esthetics:
Material quality:
Fitting:

Reliable opinion

2024-08-31, 05:17

Kamil

Front shock absorber kpl 4T

It arrived secured ( I entered my scooter model and wrote that it fits ) this is a huge plus because we do not order in the dark besides I installed the shock absorber and it sits lux I recommend I already have in my cart the next products for my ? I recommended to my cousin then he ordered se plastics and manoeuvres POLECOM!!!!!!!!!!!!!! Ps: the shock absorber is dirty by me because the grease was on the paws but it came clean.

Esthetics:
Material quality:
Fitting:

Reliable opinion

2024-11-05, 11:39

Czesław

Osa M50 M52 shock absorber bushing

The bushing is not suitable for the Osa M52! 1). Outer diameter of the bushing too small ; it is Dz 20mm, should be Dz 22mm, 2). Width of the bushing - is S=20mm, should be - S =22mm. I purchased pieces of 4. Greetings : Czeslaw Ratajczak

Esthetics:
Material quality:
Fitting:

Gmoto's reply Perhaps there was some mistake and you received the wrong product. In such cases, you should use the return/complaint form on our website.

Reliable opinion