Forgot password
Order status
Returns up to 14 days
Manufacturer
Price
Sort
Options +2 
£11.99
Lowest price from 30 days before discount: £17.89
delivery 0 £Bottom cover - shock absorber bottom shank right Mitigator KTM Husqvarna Gas Gas Sherco - 2458112107168
from 220
Browse by manufacturer
Products reviews
SHL M11 175ccm 1965r Parts of very good quality fit very well, well matched parts, recommend.
Reliable opinion
Ogar 200 from 88 - bushings go into the shock absorber , but there is no way to insert the lower lag , or after installation the suspension does not have the ability to work. The bushings are very hard - getting them to the right size was not a simple matter , but maybe this will make them last a little :) My suspension had fatal clearances , after replacement everything returned to normal , but I would not want to do it a second time without access to a lathe .
Reliable opinion
The product is 100% fit and solid. The lack of a new nut can be counted as a downside- plural, because the downside is the label- mz with drum brake, and disc brake has different length of the under-rolling (thicker part entering the left lag). The disc-brake has a 66mm under-rotation, while the drum-brake has a 90mm under-rotation.
Reliable opinion
The quality of the plastic and the workmanship itself is very good. Unfortunately, but the bushings are kind of oversized and to install them you need to fit them to the lags. I sanded them from the inside with a multi-sander. Pi fitting is very good. Assembly of Ogar 200
Reliable opinion
I own a Komar 2350 from 74r with s38 2 gear engine . Axle fits perfectly but it is a pity ze bearings for it are in a separate auction you have to search a little. The solution is better than the old garlands. I recommend.
Reliable opinion
Worthless product. The place of bearing seating- the middle part of the axle has a smaller diameter( 9mm) than the thread ( 10mm). The bearing after installation has a play on the axle of 1 mm.I advise against the purchase of this product
Reliable opinion
Ogar 200 Product as described fast delivery and good contact with the seller store worth recommending. And really careful protection of purchased items .
Reliable opinion
Romet Ogar 200, does not fit. Too tight need to saw with a file to make the suspension work. Lack of flange causes the bushing to move "up" the telescope
Reliable opinion
Ogar 2000/1988. The bushings are made of good material, but the outside and inside diameters had to be matched on a lathe and not everyone has access to a lathe.
Reliable opinion
Romet ogar 205 changing bearings to ball bearings is only the axle from gmoto.pl Material good quality thread ok. I have seen the quality of others and recommend only from gmoto.pl
Reliable opinion
Romet Ogar 200. product as fit as possible, good quality for a good price. I replaced the bushings with new ones in no time. Everything is playing at 102.
Reliable opinion
Buying a product is required to fit and look as such. After unpacking, corrosion efflorescence on the galvanized part, poor coating.
Reliable opinion
Romet Ogar 200 Good quality goods. Unfortunately the axle did not fit the bearings, but after sanding with sandpaper everything OK.
Reliable opinion
Everything according to the description and with the photo, fits like the original. Fast and hassle-free delivery, I am very satisfied .
Reliable opinion
Romet Ogar 200 1988 Similar situation as with the bushing with a flange. It is mandatory to roll the bushing before installation
Reliable opinion
The product very solidly made, everything fits perfectly , the lack of any manctament I recommend as much as possible!
Reliable opinion
Goods as described, well-protected shipment which reached me very quickly. I 100% recommend Gmoto :)
Reliable opinion
Very good product now the suspension no longer has play it flexes and works like new I highly recommend this product.
Reliable opinion
The hub made differently from the original, there is no need to be afraid of it ! The bearing is much better fixed . I RECOMMEND
Reliable opinion
Reproduction to the original very good, it is no different (compared to the original). (Romet Ogar 200 50cm3)
Reliable opinion
The workmanship as well as the reproduction to the original is ok. Fits as much as possible to the fork. (Romet Ogar 200 50cm3).
Reliable opinion
Product of good quality Made on the model of the original Fits to mopeds romet Ogar Komar Kadet Motorynka
Reliable opinion
Fits snugly, but you can't do without a rubber hammer, the material is hard and solid.
Reliable opinion
axle made neatly without any burrs or factory defects in me it fit like straight from the rometa factory
Reliable opinion
Romet Komar 2350 fits perfectly, strong material, carefully made, I am very satisfied, recommend !
Reliable opinion
For mosquito 2352 it fits perfectly good quality materials from which it was made very recommend!!!!!!
Reliable opinion
Everything ok axle wheels very good quality as they fit romet kadet motorcycle recommend 100 %
Reliable opinion
Bushing too tight as outside as inside, need to roll li fit. The material itself good.
Reliable opinion
Komar 2320 1968 The parts needed to restore a moped. Super quality and service recommended.
Reliable opinion
It does not fit a narrow fork. Need to look at the dimensions before buying. Quality ok
Reliable opinion
I am satisfied with the product, Item well made, everything works beautifully
Reliable opinion
My moped is an ogar 200 all ordered parts fit as original
Reliable opinion
Motorcycle m03 year 1984 all parts as original recommend
Reliable opinion
I recommend ;) it is not the original but it matches it :)
Reliable opinion
I recommend ;) it is not the original but it matches it :)
Reliable opinion
SHL M11 motorcycle with Wind engine. 1968 vintage.
Reliable opinion
Motorcycle TOO tight needs to be redone.
Reliable opinion