Forgot password
Order status
Free delivery from euro
Motorcycle electrical & lighting - Page 58
Options +2 
Browse Motorcycle electrical & lighting - Page 58 by manufacturer
Products reviews
Regulator very well made. It could be a little smaller, it would be easier to install because, for example, in the tropics it is tight under the lid. Moto on the regulator works elegantly, no problems with charging.
Review translated automatically
Reliable opinion
Regulator very good charging has improved immediately much better than the old mechanical possibility of connecting to the installation which has 5 cables to the regulator I recommend to everyone
Review translated automatically
Reliable opinion
KINGWAY FONERO scooter year 2007 capacity 50cc. The installation went without any problems,the only thing I had to desolder a pin from the coil. After installation surprisingly found a spark.
Review translated automatically
Reliable opinion
Romet ogar 205 year 1986. lamp fits, very good workmanship everything works electrics perfectly routed inside, i recommend this lamp similar to prl lamps
Review translated automatically
Reliable opinion
The bulb, like a bulb, shines, even very well. When driving at night it illuminates the whole road well, the color is rather yellow, in my classic it looks great.
Review translated automatically
Reliable opinion
Keeway Superlight 125cc, grille mounted without any problem , Plastic but looks cool. Fits without combining , attached with screws (included)
Review translated automatically
Reliable opinion
The item gives the impression of being solid. Plastics of good quality, a set of properly matched fuses included. Recommended product
Review translated automatically
Reliable opinion
I was looking for a long time for a good lamp for my Romet naazczescie found on gmoto. Assembly banalbie simple and satisfaction guaranteed.
Review translated automatically
Reliable opinion
Ignition+lockset Qt-4t very well made with attention to detail fits without any problem recommend to all
Review translated automatically
Reliable opinion
Cool good and fit material such a good plastic with the installation was no problem (screws in-house)
Review translated automatically
Reliable opinion
WSK M06 B3 "Hunchback" 1975, bulb like original from those years! :-) They shine well and replacement hassle-free.
Review translated automatically
Reliable opinion
I do not recommend wole buy used. In the picture the black plastic is rubber. Lamp for one bulb. Trash.
Review translated automatically
Reliable opinion
About a year ago I installed a colleague in a Honda CB500 - probably 1998.To this day he does not complain. Recently another colleague had a charging problem (also CB500, 1999) and asked for advice (the previous regulator - "more branded", read much more expensive - seemed to overcharge the battery [colleague's opinion, I did not check]. It turned out that everything was OK, the one evaluated remained stock). In both cases, the spacing of the mounting holes did not fit very well, but it's 0.6 mm max - just "lick" the housing with a suitable conifer. There could be a little more charging voltage (original :14.5 V, evaluated : 14.17 and 14, 22 V - two copies). If someone "embraces currents" and would like to check the reg. "dry", just like the "classic" ones. - regulated power supply, bulb voltmeter - then you may be strongly surprised. But after installation in the motorcycle everything OK. Probably some "more advanced" technology (perhaps - it's a little undervoltage is also not always so ?) Considering the price / quality ratio - I recommend. In general - in Hondas (at least of these vintages) you need to take care of the charging installation. Most often the problems begin at the connectors of the 3 yellow cables from the alternator. Corrosion, oxidation, increase in resistance, overheating, the rectifier-regulator begins to overheat, the internal electronics fall apart, no longer regulate the voltage and we have a "bubble" from the battery. It is worth checking these areas carefully. With Hondas (CB500, Transalp) I have done a little more than 80 kkm, and also a little at colleagues' repair.
Review translated automatically
Reliable opinion
The lamp is identical to the original. Plastic and glass parts well made, precise finish. The lamp comes with a clear instruction manual with cable numbering, which helps when connecting. The lamp also has a light switch and an ignition switch, so we have the problem of an additional element out of the way. When assembling, you need to pay attention to the attachment of the cover of the optical element, you can use a rubber mallet for this, because pressing by hand will not do much. In addition, you should take care to clean the holes of the metal plates in the frame (those to which you mount the lamp) so that there is a connection with the ground. It would be worth the lamp to add new mounting screws (screws from an old romeet spoil the effect, collectors know what I mean:), bulb and gasket for the counter. Often when ordering this is forgotten. Romet Ogar 205, model year 1987
Review translated automatically
Reliable opinion
I purchased experimentally for a ZNEN Retro Star scooter, because based on good photos of the product it looked like it would fit. Well, and it worked out. The difference is only in the sheet metal for adjusting the range of the headlight, but the bracket is identical. As for the reflector itself - I had to roughen the body of the lamp a bit, because it was a bit too tight, and everything is OK. The structure of the reflector is a bit different, but the light is properly formed and compared to my old oxidized one it is really good. It comes with a Philips bulb (bulb with a central lens). I suggest that you seal, for example, with silicone the rubber cover of the bulb holder to exclude the entry of moisture into the interior - in my previous case this was the cause of premature destruction of the reflector and in this headlight such a risk is still present. In conclusion - I RECOMMEND
Review translated automatically
Reliable opinion
I thought for a long time what to write about the ignition key for WSKi. And I came up with it, here is my opinion: The key is flat, has a milled arrowhead, thanks to which we can start probably every WSK in the country, if the technical condition of such a WSK allows it to run ;) The handle fits perfectly in the hand and the hole will allow you to attach even the most bizarre key ring we can think of. Holding this key in your hand you have the impression that you are holding a key from a Ferrari parked in our garage :)
Review translated automatically
Reliable opinion
Kingway XT50Q. Direction indicators are made fairly well, but you need to be careful not to tighten them too much because the rubber that holds the screw by which you tighten it, tends to tear :/ connection is very simple plus to plus minus to minus. The indicators shine with a good visible light even on a sunny day. They do not protrude much beyond the outline of the motorcycle, they are short and sleek, do not come apart after the first better deczsz or mud. In general, I recommend them to those who do not want to have a mega protruding lights :D
Review translated automatically
Reliable opinion
I bought 4 pieces for the front and rear. The motorcycle looks much better than on the old directions. These are smaller, more aesthetically pleasing and, most importantly, they are Led, less current-consuming and better visible. They are shorter than the factory ones, which makes the machine look better, because they are conspicuous only after they are turned on, when they are off it is hard to notice that the motorcycle has directions at all ;-)Most to the plus. The price is not high. I recommend Zumico GR 200
Review translated automatically
Reliable opinion
I ordered it not for mz-ki but suzuki ts 50 xk with 6v installation and as far as I know it should go up ( if it is like this:wzb.-voltage not reduced,szcz.-mass,+6 to the ignition and to the battery),the quality of the product is satisfactory but I recommend those who are considering buying to see the dimensions because it is easy to miss and then there may be a problem with the installation (it is quite large).Here is a link to the topic on the forum in which it is described how to connect.
Review translated automatically
Reliable opinion
Bashan 250.In my case, the mounting of the starter body screws differed from the old one by this it was impossible to wedge. I screwed from the old mount then fit elegantly. However, that's not all, the connection point of the power cable moved, I had to put it on hot glue, but this was the fault of the badly packed package, this element simply protruded from the package. Otherwise, the equipment is in working order.
Review translated automatically
Reliable opinion
I recommend this model of Polish regulator. It is much better than the blue one on 5 contacts! Charging is very good 12,6 - 13V at idle (on the blue regulator it was only 11,5 - 11,9V). The voltage regulator works great. I also have the same one in my other motorcycle and have been riding it for more than 9 years without failure! I highly recommend it! My motorcycle is a Mz etz 251 1990r
Review translated automatically
Reliable opinion
This fits to Romet Motorynka m301 well. The length is a bit more than original, but no problem. I had two issues with this one: - the switch did not work. A connection problem. Had to remove the switch and do some solving. - The blue wires are not connected to the ground. For some reason the wires do not touch the connection bolt mounting. Need to fix that.
Review translated automatically
Reliable opinion
Jawa 350 model 634 1983. The voltage regulator does its job,finally the charging returned,so I can enjoy the ride. Assembly to this motorcycle requires drilling a new hole in the mount,as the existing ones do not coincide with those present on the motorcycle. Other than that, the installation is successful. I recommend this product !
Review translated automatically
Reliable opinion
Scooter 2017 Toros El Rio Fit 99,coma 8% The most important thing is that everything works.I AM satisfied with this store more than on allegro because here everything is described in detail before buying to which I fit all models listed is solid and clear .This store I like the MOST .
Review translated automatically
Reliable opinion
I own an 89 ogar, this item 100% reflects the original, with the installation was not the slightest problem, the included instructions did a great job. The lamp in perfect condition was delivered in a very fast time. On Monday it was shipped, and on Tuesday it was already at my place.
Review translated automatically
Reliable opinion
The ordered magnet wheel was of very good quality. All dimensions and threads were identical to the old wheel. The installation took place without any problems, everything fit perfectly. The product fit perfectly on my Chinese Xiling Buggy with 150cc GY6 engine.
Review translated automatically
Reliable opinion
Honda CB 500 S, 1999. Before replacement charging only above 3000 rpm at slow 12.3 volts without load, after replacement 14.3 volts after load 14.1-14 volts (you would have to check the battery and the pradnic-alternator itself before you proceed with the replacement) In summary - good purchase quality / price I recommend
Review translated automatically
Reliable opinion
The product perfectly met all my expectations pipe perfectly blended into the candle of my Cross 125 you can see that the manufacturers pay attention to their products. The whole product is strong and resistant to high temperatures and water. The product is small which makes it easier to maintain aesthetics.
Review translated automatically
Reliable opinion
I am the owner of a 1986 Ogara 205, the product purchased from you - Romet front lamp is identical to my old damaged one. The quality of workmanship very good, and above all, it fits perfectly. Shipping promptly from Gmoto website, for this an additional plus. Regards
Review translated automatically
Reliable opinion
Platinums fit after a slight grinding of the hole in the hammer, because it was too tight, after a gentle filing sits without any play, also gently had to bend the contact on the base of the interrupter to evenly contact the elements, after a moment of fiddling fits perfectly. I recommend.
Review translated automatically
Reliable opinion
Exact genuine product with the same dimensions as the original one Exact genuine product with the same dimensions as the original one Exact genuine product with the same dimensions as the original one Exact genuine product with the same dimensions as the original one
Review translated automatically
Reliable opinion
Honda cbr 600 2002 year . The directions are very carefully made while driving do not move and there is no effect as if it is about to fall off as it is in some other Chinese counterparts. I recommend this product even for very demanding users of two-wheelers.
Review translated automatically
Reliable opinion
Bendix came complete assembled the only thing that had to be done was to reverse the one-way bearing itself because it did not want to mesh with the magnet and you have to be careful how you translate to the other side because those balls what are there like to fall out The product fits Moretti 250 167fmm.
Review translated automatically
Reliable opinion
LED turn signals with very good visibility. Made of very high quality materials making my gem look even more defiant ! I recommend the product wholeheartedly to people who want their motorcycle to look even better !
Review translated automatically
Reliable opinion
I warmly recommend gmoto.pl store there are many parts for motorcycles and mopeds Parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials
Review translated automatically
Reliable opinion
APRILIA RALLY 2001 year 50cc 2t. I ordered a minarelli starter. Fast delivery after just two days I received the shipment. The product as in the description and in the photo. Super thank you. Ps. And so I will still use gmoto services for further rebuilding of aprilka.
Review translated automatically
Reliable opinion
Super, extra, phenomenal because they sent this and that. The transaction like a fairy tale until they are wet my panties. Seller wonderful, worth recommending and praise. I will say briefly, because here narrow are the opinions of the framework: sell to Him, buy from Him or apply to the wound. RECOMMEND!
Review translated automatically
Reliable opinion
romet ogar 205 1987 I bought without high expectations after all it is a lamp for an old motorcycle but it exceeded my expectations in every aspect perfect reflective surface perfect without bubbles simply brilliant I highly recommend !
Review translated automatically
Reliable opinion
Very super parts very solid company within two days I received the package completely undamaged there are not many companies like this one they have good parts and they are not expensive I would recommend it to all my friends who have scooters thank you and best regards
Review translated automatically
Reliable opinion
The patches do not fit the MZ ETZ 250 because of the fit, the part that should push against the cam does not reach it, so you can not adjust the ignition (perhaps the reason is the old cam) although the old patches fit without a problem.
Review translated automatically
Reliable opinion