Forgot password
Order status
Free delivery from euro
Motorcycle electrical & lighting - Page 59
Manufacturer
Price
Sort
from 357
Browse Motorcycle electrical & lighting - Page 59 by manufacturer
Products reviews
Motorcycle honda hornet 2002 volume 600 cm as you can see in the attached photo the original indicators do not look too good, so I decided to buy new indicators that will add an amazing look to the moto. The indicators are made of very good material, the leds shine brightly, which guarantees safety, installation is very easy. In a word, I am satisfied with the purchase
Review translated automatically
Reliable opinion
I have owned (already used) a router delux 1 scooter (engine capacity 50 cc) for a short time. This is my first scooter. On gmoto.pl I ordered some necessary parts to start this horse :) The starter with bendix is made solidly and it is easy to install.Everything agrees with the offer. I have no reservations about the store or the parts, so I can confidently recommend it to any owner of a unicycle. Regards.
Review translated automatically
Reliable opinion
The lampshade is very close to the original. I would even say that a person who does not know what to look at will not notice that something is wrong. The embossing is identical. It is known that the inscriptions on the lamp will also differ. To the biggest difference between the original and this part that the store is the reflector. In the original it is flush with the rest and here convex. But I still recommend it. In the photo the original is mounted on the lamp
Review translated automatically
Reliable opinion
Junak 901 year 2017 capacity 49 CC I bought new. It had a lock on the revs and that indeed when it came to me this module quietly into the frame fit. Improved my motorcycle performance screws into higher revs. The quality of workmanship is very good module is larger than blocked but there is no problem with installation in Junak 901
Review translated automatically
Reliable opinion
Hi. The lamp will be fitted to a 1963 WFM Osa M52 motorcycle photo 1. Photos 2 and 3 show the described product purchased a year ago. The product meets my expectations. Only it would be possible to put the connection connectors. Greetings
Review translated automatically
Reliable opinion
Mz Etz 250 1989. The product did not meet my expectations mainly the quality of the chrome. There is no effect of ,,mirror," besides that the frame is about 5 mm narrower than the original. The fit itself is good there was no problem with installation.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
The module works very well with Loncin 125 and works flawlessly immediately feel more power. Very fast installation. Recommended.
Review translated automatically
Reliable opinion
Everything ok, I recommend for CB500 - fits perfectly. The heat sink provides adequate cooling, the factory one did not have it and there was a problem.
Review translated automatically
Reliable opinion
As described. Size and number of teeth OK Quick delivery Mount on pioneer atv-200
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
Yamah xj 600n 4br 96' + The indicators look nice, they shine with a nice yellow light well visible during the day and even better at night, the metal housing painted in black gloss seems solid and durable, the glass is made of plastic which nicely disperses the light set on a gasket, the wires of adequate thickness ended with solid connectors. - too small mounting thread M8 (key 13) - paint streaks on the metal housing - not aesthetic screw fixing the glass
Review translated automatically
Reliable opinion
Hello, I purchased an unlocked module for Barton fighter 50 and honestly I recommend everyone to buy this module on this site. After installation which is literally simple, the motorcycle is unrecognizable. It picks up better, it is much so called ripper and the performance is much better. I measured the maximum speed after the replacement and on the straight 95km/h passed, and I think it would have been able to do a little more, but unfortunately the straight ended. I sincerely recommend this purchase.
Review translated automatically
Reliable opinion
Hello My motorcycle is a 1968 MZ ES 250/2 TROPHY. I purchased these turn signals because they are identical to those that were installed in the orginale. A very high quality product. I was even surprised because the original parts are hard to get anymore and the non-orginal ones usually look bad and are hard to install. In this case, the appearance, fit and ease of installation surprised me very positively.
Review translated automatically
Reliable opinion
Patient: Honda CB600F Hornet, vintage 2001. Mission: installation of new turn signals at the rear. Mileage: without any problems. The turn signals made great, everything fits, nothing sticks out, does not squeak or crackle. The LEDs shine brightly until nice. If you look from too close and turn on the blinker - you will go blind for 5 minutes. Tested. I recommend, turn signals perfect as for me.
Review translated automatically
Reliable opinion
I have a moped brand Router ws 50 I highly recommend the purchase of this module, my moped began to accelerate much faster and the top speed also increased, on the GPS without the module v-max was about 65kmh and with the module 80. The module is made of good plastic, it is larger than the original but still fits very well, I have it for about 2 weeks now and I really recommend the purchase of this product.
Review translated automatically
Reliable opinion
My motorcycle is a Chopper kingway Superbyke XT 50Q-00 I bought and buy parts on Gmoto.pl I bought an unlocked module which unlocked my motorcycle which gave more power and better acceleration finally my engine is working as it should,I am satisfied with the quality of the product its delivery and replacement of parts the company Gmoto.pl in aroused great trust in me thank you and RECOMMEND you
Review translated automatically
Reliable opinion
The module is a little larger than the standard one, but it fits and can be easily mounted. Electronics flooded with gel, which is a little sticky and will probably collect all sorts of flecks, but you can not see it, so all in all not important ☺️. After installation, the motorcycle gained a little power, collects better at the lights, which is what I wanted. For the price I recommend. Zumico GR 200
Review translated automatically
Reliable opinion
Good day I have a WSK 125 and a Cross 125 to WSK platens and capacitor. How much ze 5 minutes I put on without dogging without combining it fit as it should be the same in the cross and the line well fitted and on + with the adjustment you can set yourself on the line than in the carburetor turn in then adjust the carburetor and none of this will happen. Until you adjust the carburetor.
Review translated automatically
Reliable opinion
The product is solidly made, it is a little larger than the original module, however, into the frame of Zippa Pro 50 fits. The bike got a little kick after the change, but there is not a huge difference. The only disadvantage for me is the material with which the module is flooded, it is sticky, so after some time it will collect debris, dust, etc.
Review translated automatically
Reliable opinion
Fits perfectly into my Kinroad Chopper Xt50q. V max unchanged (I close the alarm clock), but much more powerful (it goes over hills it had trouble with before without problems). Replacement took me about 15 minutes, and only because of the strong tightening of one of the screws. In my motorcycle this module is located under the main seat.
Review translated automatically
Reliable opinion
Turn signals mounted on Kawasaki ER6N at the rear on a short bracket for the license plate, with the fit was no problem. They present themselves very nice, the light is very intense (visible) even in sunny weather, to the quality I have no reservations. I can in good conscience recommend these turn signals.
Review translated automatically
Reliable opinion
Bolts for the installation of platinums have too large a diameter. To assemble the ignition you need to grind the hole of the "anvil" minimally, the hammer fits ok. The hole of the anvil (for the screws for adjusting the gap behind the platynes) too small/poorly profiled, you need to grind with a small file to freely adjust everything.
Review translated automatically
Reliable opinion
It came what I wanted, I thought I would get a piece of Chinese plastic that I would put in my motorcycle, but here I was pleasantly surprised. Exquisite workmanship, I put it in right away without the slightest problems which is a testament to the excellent fit. If anyone is thinking about buying it, I recommend it WORTH IT!
Review translated automatically
Reliable opinion
Purchase as successful as possible, it's nice to fire up the starter again! Everything works and fits seamless replacement. The only thing to pay attention to is the termination of the cable because it is on the eyelet, and in my case needed a plug, but this is just so informative ;) I recommend the product as much as possible.
Review translated automatically
Reliable opinion
I have in a factory garden tractor engine from Simson. There is a fan on the magnet wheel, I had to make 2 holes with M5 thread, in addition, the ignition setting indicator I had to remove because it limited the setting of the ignition advance angle. After these modifications, everything works properly.
Review translated automatically
Reliable opinion
I have a Simson Schwalbe and a '68 WSK 125 two frame prepared for registration. I will need a battery for this WSK, but only in May when it will be warmer and I will also order from this company because when buying turn signals for Simson everything went b.nicely. Regards Janek.
Review translated automatically
Reliable opinion
My motorcycle is a Simson S51 with a capacity of 50 cm3, the above item is superbly made, looks very nice, and most importantly, you do not need to buy any screws because the item is immediately assembled and ready for use, you only need to install. I sincerely RECOMMEND !
Review translated automatically
Reliable opinion
Cool directions. As luck would have it, my front right one burned out and I drove with those for 2 years. It was nice to get a pair. Material ok, I knew what to expect. I know from experience that they shine well and clearly. I hope there will be no problem with installation. Overall I recommend.
Review translated automatically
Reliable opinion
Hello I have a lot of motorcycles in my garage, currently I am dealing with Jawa 350Ts, the installation went without a problem Jawa runs without any complaints .The next motorcycle in my plan to restore will be a 1976 Kmar Sport and I will certainly buy some parts in your store greetings
Review translated automatically
Reliable opinion
WSK 125 B1 1970, made as a "vintage" - With battery, but with minor modifications. Capacitor without comments. In platinums required refinement of the hole for the pivot axis and filing of the hole for insulating washers for attaching the wires. 20 min of work with conifers.
Review translated automatically
Reliable opinion
I have a Kawasaki 1700 VN beautifully dressed here everything must shine. I have been an active motorcyclist since I was 16. I am 63 years old. With them to do business is a pleasure. The goods purchased are exactly as I ordered. I encourage you to buy from your store.
Review translated automatically
Reliable opinion
I would like to share my opinion on the module I had the original module in my motorcycle but I purchased from gmoto website unlocked Module is made, with very good materials after inserting into the motorcycle this module immediately came out better on the revs.
Review translated automatically
Reliable opinion
good thing, after replacing from factory to unlocked you can see a significant difference. Good quality workmanship comparing with the factory one can see a significant difference on the plus side . Plug stiff, fits perfectly into ym 50-8b. Zero problems with installation. I recommend.
Review translated automatically
Reliable opinion
Mz ETZ 251 of 1990 vintage . The product looks great and fits like the original. This is not my first time shopping at Gmoto and I am satisfied. There is everything I need for my motorcycle huge plus all in one place. I HIGHLY RECOMMEND
Review translated automatically
Reliable opinion
Hello have a 2008 kingway koyot 50 cm3 scooter the starter and bendix arrived to me in an undamaged way which proves that the company packaged them well :) starter looks nice and easy to put on the same as the bendix 10/10 greetings!
Review translated automatically
Reliable opinion
Hello have a 2008 kingway koyot 50 cm3 scooter the starter and bendix arrived to me in an undamaged way which proves that the company packaged them well :) starter looks nice and easy to put on the same as the bendix 10/10 greetings!
Review translated automatically
Reliable opinion
Motobi Owl 4t 2014 scooter. The starter does its job perfectly, the scooter burns to the touch, the new bendix bounces at the right moment, nothing creaks. Installation trivially easy, all you need is the desire and half an hour of free time. I recommend :)
Review translated automatically
Reliable opinion
Product as described. Bought for a Chinese quad 125.Quad after installation became more powerful. Easy installation. Really worth it for such a price. Much better construction than from my old Chinese module. Worth it and recommend.
Review translated automatically
Reliable opinion
The merchandise is sensational. Delivery and packaging professional. I really like the reliable description of the product. Providing the dimensions of the specifications is what a person is looking for and gets it from professionals like Gmoto.
Review translated automatically
Reliable opinion