Single

Wojciech

Reliable opinion

I own a 1985 WSK 125 M06B3. The purchased wrench does not fit the exhaust elbow nut at all. It is definitely too small. In other words, the claw is too small in diameter. Not even the possibility of catching with the wrench on the cutters on the nut.

Sebastian

Reliable opinion

The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.

DOMINIK

Reliable opinion

GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS

Bartłomiej

Reliable opinion

The puller is made of good quality thick sheet metal, which certainly will not bend after several uses. All the holes matched, with this puller I unbolted the engine in a WSK 125 much faster than with a classic hammer and chisel. The only minor flaw I noticed was a rather large burr with which I cut myself, but a moment on the grinder and the problem was ove... more

Sebastian

Reliable opinion

The idea for the puller and the drilling of some of the holes was excellent, unfortunately the execution is average - some of the holes need to be drilled so that the screw "six" can pass through, to make matters worse the accuracy of the holes is "so-so" - they could be made more accurate by at least 5 mm. Thus, a second revision of this puller would be use... more

Łukasz

Reliable opinion

I bought the parts for my WFM 125 M06 from 1954 first models engine . Workmanship ok, but I had to drill one hole to fit into the holes in the crankcase. Express shipping , I received the parts on the second day. I recommend

Kewin

Reliable opinion

Hello, the puller ok, but the thread was as if the screw was not machined? could not be screwed in. It had to be re-threaded, for me it was not problematic, but as if someone did not have a threader it is a problem.

Paweł

Reliable opinion

Wrench checked when replacing the elbow o-ring. Without a problem unscrewed the nut. It is an additional equipment of my WSKi. I recommend. The price adequate to the goods.

Mikołaj

Reliable opinion

Suzuki DR125 SM 2008, very decent wrench, it has a small size, so it fits into the tool compartment, I carry it with me always

Piotr

Reliable opinion

Each of the things I have ordered have in common excellent workmanship and affordable price. Everything on time and friendly service. Greetings

Łukasz

Reliable opinion

The spark plug wrench is a bit too long for a WSK 125 motorcycle, on contact. A shorter one would be useful, but maybe on other motorcycles it can handle.

Adam

Reliable opinion

1961 WSK. M06 Very cool handy wrench, made in zinc. Puts it in the glove box as a wrench for changing a spark plug on the road.

Robert

Reliable opinion

Super seller and super products. I recommend this seller to everyone. Everything as described and very fast delivery

Dann

Reliable opinion

Simple tool that works just as it should. Without this I could not have changed the ignition tubes on my boat engine.

Antoni

Reliable opinion

Decent and sturdy, in addition, handy, even a baked candle managed to pull out after a short moment of wrestling.

Michael

Reliable opinion

In the end it doesn't fit my requirements but it's good to have anyway for other purposes. I would buy it again.

Marcin

Reliable opinion

I am after replacing the plug. The wrench is solid and made of good quality material. A product worthy of purchase.

Lucyna

Reliable opinion

Husband is very satisfied unbolting the wsk 175 engine took only a moment without much trouble. I highly recommend

Paweł

Reliable opinion

router delux 1 2016 the original key is too short to unscrew the spark plug and this one is perfect even I recommend it as well

Piotr

Reliable opinion

Very nice length and workmanship. It also does not take up much space in the glove compartment of the motorcycle. Recommended. no problem